[Intel-gfx] [PATCH] drm/i915: Don't spew errors when resetting HDMI scrambling/bit clock ratio fails
Ville Syrjala
ville.syrjala at linux.intel.com
Thu Mar 22 13:22:27 UTC 2018
From: Ville Syrjälä <ville.syrjala at linux.intel.com>
When we're disabling the HDMI link we try to reset the scrambling and
TMDS bit clock ratio back to the default values. This will fail if the
sink has already been disconnected. Thus we should not print an error
message when resetting the scrambling/TMDS bit clock ratio fail during
disable. During enable we do want the error, and during disable we may
still want to know what happended for debug purposes so let's use
DRM_DEBUG_KMS() there.
Cc: Shashank Sharma <shashank.sharma at intel.com>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=105644
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=105655
Signed-off-by: Ville Syrjälä <ville.syrjala at linux.intel.com>
---
drivers/gpu/drm/i915/intel_ddi.c | 11 ++--
drivers/gpu/drm/i915/intel_drv.h | 10 ++--
drivers/gpu/drm/i915/intel_hdmi.c | 104 +++++++++++++++++++++++++-------------
3 files changed, 78 insertions(+), 47 deletions(-)
diff --git a/drivers/gpu/drm/i915/intel_ddi.c b/drivers/gpu/drm/i915/intel_ddi.c
index 8c2d778560f0..e151c073debb 100644
--- a/drivers/gpu/drm/i915/intel_ddi.c
+++ b/drivers/gpu/drm/i915/intel_ddi.c
@@ -2426,10 +2426,8 @@ static void intel_enable_ddi_hdmi(struct intel_encoder *encoder,
struct intel_digital_port *dig_port = enc_to_dig_port(&encoder->base);
enum port port = encoder->port;
- intel_hdmi_handle_sink_scrambling(encoder,
- conn_state->connector,
- crtc_state->hdmi_high_tmds_clock_ratio,
- crtc_state->hdmi_scrambling);
+ intel_hdmi_sink_scrambling_enable(encoder,
+ crtc_state, conn_state);
/* Display WA #1143: skl,kbl,cfl */
if (IS_GEN9_BC(dev_priv)) {
@@ -2524,9 +2522,8 @@ static void intel_disable_ddi_hdmi(struct intel_encoder *encoder,
intel_audio_codec_disable(encoder,
old_crtc_state, old_conn_state);
- intel_hdmi_handle_sink_scrambling(encoder,
- old_conn_state->connector,
- false, false);
+ intel_hdmi_sink_scrambling_enable(encoder,
+ old_crtc_state, old_conn_state);
}
static void intel_disable_ddi(struct intel_encoder *encoder,
diff --git a/drivers/gpu/drm/i915/intel_drv.h b/drivers/gpu/drm/i915/intel_drv.h
index a215aa78b0be..90ea6e8e8f5b 100644
--- a/drivers/gpu/drm/i915/intel_drv.h
+++ b/drivers/gpu/drm/i915/intel_drv.h
@@ -1783,10 +1783,12 @@ struct intel_hdmi *enc_to_intel_hdmi(struct drm_encoder *encoder);
bool intel_hdmi_compute_config(struct intel_encoder *encoder,
struct intel_crtc_state *pipe_config,
struct drm_connector_state *conn_state);
-void intel_hdmi_handle_sink_scrambling(struct intel_encoder *intel_encoder,
- struct drm_connector *connector,
- bool high_tmds_clock_ratio,
- bool scrambling);
+void intel_hdmi_sink_scrambling_enable(struct intel_encoder *encoder,
+ struct intel_crtc_state *crtc_state,
+ struct drm_connector_state *conn_state);
+void intel_hdmi_sink_scrambling_disable(struct intel_encoder *encoder,
+ struct intel_crtc_state *old_crtc_state,
+ struct drm_connector_state *old_conn_state);
void intel_dp_dual_mode_set_tmds_output(struct intel_hdmi *hdmi, bool enable);
void intel_infoframe_init(struct intel_digital_port *intel_dig_port);
diff --git a/drivers/gpu/drm/i915/intel_hdmi.c b/drivers/gpu/drm/i915/intel_hdmi.c
index 1baef4ac7ecb..a27da73147fd 100644
--- a/drivers/gpu/drm/i915/intel_hdmi.c
+++ b/drivers/gpu/drm/i915/intel_hdmi.c
@@ -2068,55 +2068,87 @@ intel_hdmi_add_properties(struct intel_hdmi *intel_hdmi, struct drm_connector *c
connector->state->picture_aspect_ratio = HDMI_PICTURE_ASPECT_NONE;
}
-/*
- * intel_hdmi_handle_sink_scrambling: handle sink scrambling/clock ratio setup
- * @encoder: intel_encoder
- * @connector: drm_connector
- * @high_tmds_clock_ratio = bool to indicate if the function needs to set
- * or reset the high tmds clock ratio for scrambling
- * @scrambling: bool to Indicate if the function needs to set or reset
- * sink scrambling
- *
- * This function handles scrambling on HDMI 2.0 capable sinks.
- * If required clock rate is > 340 Mhz && scrambling is supported by sink
- * it enables scrambling. This should be called before enabling the HDMI
- * 2.0 port, as the sink can choose to disable the scrambling if it doesn't
- * detect a scrambled clock within 100 ms.
- */
-void intel_hdmi_handle_sink_scrambling(struct intel_encoder *encoder,
- struct drm_connector *connector,
- bool high_tmds_clock_ratio,
- bool scrambling)
+static int intel_hdmi_handle_sink_scrambling(struct intel_encoder *encoder,
+ struct drm_connector *connector,
+ bool high_tmds_clock_ratio,
+ bool scrambling)
{
+ struct drm_i915_private *dev_priv = to_i915(encoder->base.dev);
struct intel_hdmi *intel_hdmi = enc_to_intel_hdmi(&encoder->base);
- struct drm_i915_private *dev_priv = connector->dev->dev_private;
struct drm_scrambling *sink_scrambling =
&connector->display_info.hdmi.scdc.scrambling;
- struct i2c_adapter *adptr = intel_gmbus_get_adapter(dev_priv,
- intel_hdmi->ddc_bus);
+ struct i2c_adapter *adapter =
+ intel_gmbus_get_adapter(dev_priv, intel_hdmi->ddc_bus);
bool ret;
if (!sink_scrambling->supported)
- return;
+ return 0;
- DRM_DEBUG_KMS("Setting sink scrambling for enc:%s connector:%s\n",
- encoder->base.name, connector->name);
+ DRM_DEBUG_KMS("[CONNECTOR:%d:%s] scrambling=%s, TMDS bit clock ratio=1/%dX\n",
+ connector->base.id, connector->name,
+ yesno(scrambling), high_tmds_clock_ratio ? 40 : 10);
/* Set TMDS bit clock ratio to 1/40 or 1/10 */
- ret = drm_scdc_set_high_tmds_clock_ratio(adptr, high_tmds_clock_ratio);
- if (!ret) {
- DRM_ERROR("Set TMDS ratio failed\n");
- return;
- }
+ ret = drm_scdc_set_high_tmds_clock_ratio(adapter,
+ high_tmds_clock_ratio);
+ if (ret)
+ return ret;
/* Enable/disable sink scrambling */
- ret = drm_scdc_set_scrambling(adptr, scrambling);
- if (!ret) {
- DRM_ERROR("Set sink scrambling failed\n");
- return;
- }
+ ret = drm_scdc_set_scrambling(adapter, scrambling);
+ if (ret)
+ return ret;
+
+ return 0;
+}
- DRM_DEBUG_KMS("sink scrambling handled\n");
+/*
+ * intel_hdmi_sink_scrambling_enable: configure sink scrambling/TMDS bit clock ratio
+ * @crtc_state: new crtc state
+ * @conn_state: new connector state
+ *
+ * Configure scrambling and TMDS bit clock ratio on HDMI 2.0 capable sinks.
+ * If required clock rate is > 340 Mhz && scrambling is supported by sink
+ * it enables scrambling. This should be called before enabling the HDMI
+ * 2.0 port, as the sink can choose to disable the scrambling if it doesn't
+ * detect a scrambled clock within 100 ms.
+ */
+void intel_hdmi_sink_scrambling_enable(struct intel_encoder *encoder,
+ struct intel_crtc_state *crtc_state,
+ struct drm_connector_state *conn_state)
+{
+ struct drm_connector *connector = conn_state->connector;
+ int ret;
+
+ ret = intel_hdmi_handle_sink_scrambling(encoder, connector,
+ crtc_state->hdmi_high_tmds_clock_ratio,
+ crtc_state->hdmi_scrambling);
+ if (ret)
+ DRM_ERROR("[CONNECTOR:%d:%s] Failed to configure sink scrambling/TMDS bit clock ratio\n",
+ connector->base.id, connector->name);
+}
+
+/*
+ * intel_hdmi_sink_scrambling_disable: handle sink scrambling/clock ratio setup during disable
+ * @old_crtc_state: old crtc state
+ * @old_conn_state: old connector state
+ *
+ * Reset scrambling and TMDS bit clock ratio on HDMI 2.0 capable sinks.
+ * We do this to make sure the sink returns to the default settings once
+ * we're done using it.
+ */
+void intel_hdmi_sink_scrambling_disable(struct intel_encoder *encoder,
+ struct intel_crtc_state *old_crtc_state,
+ struct drm_connector_state *old_conn_state)
+{
+ struct drm_connector *connector = old_conn_state->connector;
+ int ret;
+
+ ret = intel_hdmi_handle_sink_scrambling(encoder, connector,
+ false, false);
+ if (ret)
+ DRM_DEBUG_KMS("[CONNECTOR:%d:%s] Failed to reset sink scrambling/TMDS bit clock ratio\n",
+ connector->base.id, connector->name);
}
static u8 chv_port_to_ddc_pin(struct drm_i915_private *dev_priv, enum port port)
--
2.16.1
More information about the Intel-gfx
mailing list