[Intel-gfx] [PATCH] drm/scdc-helper: Convert errors into debug messages

[Ville Syrjala]

From: Ville Syrjälä <ville.syrjala at linux.intel.com>

Since we may attempt to reconfigure SCDC when the sink has already been
disconnected we probably shouldn't scare the user with errors in dmesg
that are 100% expected in that case. Just leave it up to the caller
whether to print an error message or not, and just output debug
messages from the helper itself.

Cc: Shashank Sharma <shashank.sharma at intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala at linux.intel.com>
---
 drivers/gpu/drm/drm_scdc_helper.c | 10 +++++-----
 1 file changed, 5 insertions(+), 5 deletions(-)

diff --git a/drivers/gpu/drm/drm_scdc_helper.c b/drivers/gpu/drm/drm_scdc_helper.c
index 657ea5ab6c3f..870e25f1f788 100644
--- a/drivers/gpu/drm/drm_scdc_helper.c
+++ b/drivers/gpu/drm/drm_scdc_helper.c
@@ -141,7 +141,7 @@ bool drm_scdc_get_scrambling_status(struct i2c_adapter *adapter)
 
 	ret = drm_scdc_readb(adapter, SCDC_SCRAMBLER_STATUS, &status);
 	if (ret < 0) {
-		DRM_ERROR("Failed to read scrambling status: %d\n", ret);
+		DRM_DEBUG_KMS("Failed to read scrambling status: %d\n", ret);
 		return false;
 	}
 
@@ -168,7 +168,7 @@ bool drm_scdc_set_scrambling(struct i2c_adapter *adapter, bool enable)
 
 	ret = drm_scdc_readb(adapter, SCDC_TMDS_CONFIG, &config);
 	if (ret < 0) {
-		DRM_ERROR("Failed to read TMDS config: %d\n", ret);
+		DRM_DEBUG_KMS("Failed to read TMDS config: %d\n", ret);
 		return false;
 	}
 
@@ -179,7 +179,7 @@ bool drm_scdc_set_scrambling(struct i2c_adapter *adapter, bool enable)
 
 	ret = drm_scdc_writeb(adapter, SCDC_TMDS_CONFIG, config);
 	if (ret < 0) {
-		DRM_ERROR("Failed to enable scrambling: %d\n", ret);
+		DRM_DEBUG_KMS("Failed to enable scrambling: %d\n", ret);
 		return false;
 	}
 
@@ -223,7 +223,7 @@ bool drm_scdc_set_high_tmds_clock_ratio(struct i2c_adapter *adapter, bool set)
 
 	ret = drm_scdc_readb(adapter, SCDC_TMDS_CONFIG, &config);
 	if (ret < 0) {
-		DRM_ERROR("Failed to read TMDS config: %d\n", ret);
+		DRM_DEBUG_KMS("Failed to read TMDS config: %d\n", ret);
 		return false;
 	}
 
@@ -234,7 +234,7 @@ bool drm_scdc_set_high_tmds_clock_ratio(struct i2c_adapter *adapter, bool set)
 
 	ret = drm_scdc_writeb(adapter, SCDC_TMDS_CONFIG, config);
 	if (ret < 0) {
-		DRM_ERROR("Failed to set TMDS clock ratio: %d\n", ret);
+		DRM_DEBUG_KMS("Failed to set TMDS clock ratio: %d\n", ret);
 		return false;
 	}
 
-- 
2.16.1