[Intel-gfx] [PATCH v2 05/10] drm/i915/psr/cnl: Enable Y-coordinate support in source

José Roberto de Souza jose.souza at intel.com
Tue Mar 27 01:06:29 UTC 2018


From: "Souza, Jose" <jose.souza at intel.com>

For Geminilake and Cannonlake+ the Y-coordinate support must be
enabled in PSR2_CTL too.

Spec: 7713 and 7720

Cc: Dhinakaran Pandiyan <dhinakaran.pandiyan at intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi at intel.com>
Signed-off-by: José Roberto de Souza <jose.souza at intel.com>
---
 drivers/gpu/drm/i915/i915_reg.h  |  3 +++
 drivers/gpu/drm/i915/intel_psr.c | 16 ++++++++++++----
 2 files changed, 15 insertions(+), 4 deletions(-)

diff --git a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h
index 1bca695f404b..1c6f463bc919 100644
--- a/drivers/gpu/drm/i915/i915_reg.h
+++ b/drivers/gpu/drm/i915/i915_reg.h
@@ -4052,6 +4052,8 @@ enum {
 #define EDP_PSR2_CTL			_MMIO(0x6f900)
 #define   EDP_PSR2_ENABLE		(1<<31)
 #define   EDP_SU_TRACK_ENABLE		(1<<30)
+#define   EDP_Y_COORDINATE_VALID	(1<<26) /* GLK and CNL+ */
+#define   EDP_Y_COORDINATE_ENABLE	(1<<25) /* GLK and CNL+ */
 #define   EDP_MAX_SU_DISABLE_TIME(t)	((t)<<20)
 #define   EDP_MAX_SU_DISABLE_TIME_MASK	(0x1f<<20)
 #define   EDP_PSR2_TP2_TIME_500		(0<<8)
@@ -7058,6 +7060,7 @@ enum {
 #define CHICKEN_TRANS_A         0x420c0
 #define CHICKEN_TRANS_B         0x420c4
 #define CHICKEN_TRANS(trans) _MMIO_TRANS(trans, CHICKEN_TRANS_A, CHICKEN_TRANS_B)
+#define  VSC_DATA_SEL_SOFTWARE_CONTROL	(1<<25) /* GLK and CNL+ */
 #define  DDI_TRAINING_OVERRIDE_ENABLE	(1<<19)
 #define  DDI_TRAINING_OVERRIDE_VALUE	(1<<18)
 #define  DDIE_TRAINING_OVERRIDE_ENABLE	(1<<17) /* CHICKEN_TRANS_A only */
diff --git a/drivers/gpu/drm/i915/intel_psr.c b/drivers/gpu/drm/i915/intel_psr.c
index fb2d0fe7106b..84e1f8be5c48 100644
--- a/drivers/gpu/drm/i915/intel_psr.c
+++ b/drivers/gpu/drm/i915/intel_psr.c
@@ -386,8 +386,10 @@ static void hsw_activate_psr2(struct intel_dp *intel_dp)
 	/* FIXME: selective update is probably totally broken because it doesn't
 	 * mesh at all with our frontbuffer tracking. And the hw alone isn't
 	 * good enough. */
-	val |= EDP_PSR2_ENABLE |
-		EDP_SU_TRACK_ENABLE;
+	val |= EDP_PSR2_ENABLE | EDP_SU_TRACK_ENABLE;
+	if (INTEL_GEN(dev_priv) >= 10 || IS_GEMINILAKE(dev_priv)) {
+		val |= EDP_Y_COORDINATE_VALID | EDP_Y_COORDINATE_ENABLE;
+	}
 
 	if (drm_dp_dpcd_readb(&intel_dp->aux,
 				DP_SYNCHRONIZATION_LATENCY_IN_SINK,
@@ -569,8 +571,14 @@ static void hsw_psr_enable_source(struct intel_dp *intel_dp,
 		hsw_psr_setup_aux(intel_dp);
 
 	if (dev_priv->psr.psr2_support) {
-		u32 chicken = PSR2_VSC_ENABLE_PROG_HEADER
-			      | PSR2_ADD_VERTICAL_LINE_COUNT;
+		u32 chicken = I915_READ(CHICKEN_TRANS(cpu_transcoder));
+
+		if (INTEL_GEN(dev_priv) == 9 && !IS_GEMINILAKE(dev_priv))
+			chicken |= (PSR2_VSC_ENABLE_PROG_HEADER
+				   | PSR2_ADD_VERTICAL_LINE_COUNT);
+
+		else
+			chicken &= ~VSC_DATA_SEL_SOFTWARE_CONTROL;
 		I915_WRITE(CHICKEN_TRANS(cpu_transcoder), chicken);
 
 		I915_WRITE(EDP_PSR_DEBUG,
-- 
2.16.2



More information about the Intel-gfx mailing list