[Intel-gfx] [PATCH v4 1/2] drm/i915/cnl: Implement WaProgramMgsrForCorrectSliceSpecificMmioReads
Mika Kuoppala
mika.kuoppala at linux.intel.com
Tue Mar 27 14:22:49 UTC 2018
Yunwei Zhang <yunwei.zhang at intel.com> writes:
> WaProgramMgsrForCorrectSliceSpecificMmioReads dictate that before any MMIO
> read into Slice/Subslice specific registers, MCR packet control
> register(0xFDC) needs to be programmed to point to any enabled
> slice/subslice pair. Otherwise, incorrect value will be returned.
>
> However, that means each subsequent MMIO read will be forwarded to a
> specific slice/subslice combination as read is unicast. This is OK since
> slice/subslice specific register values are consistent in almost all cases
> across slice/subslice. There are rare occasions such as INSTDONE that this
> value will be dependent on slice/subslice combo, in such cases, we need to
> program 0xFDC and recover this after. This is already covered by
> read_subslice_reg.
>
> Also, 0xFDC will lose its information after TDR/engine reset/power state
> change.
>
> Reference: HSD#1405586840 BSID#0575
Use plural, and add comma in between.
Move 'References' right before Cc:s after the version log...
>
> v2:
> - use fls() instead of find_last_bit() (Chris)
> - added INTEL_SSEU to extract sseu from device info. (Chris)
> v3:
> - rebase on latest tip
> v4:
> - Added references (Mika)
>
.. in here.
And we usually do put Cc:s before s-o-b.
For example, see commit 465418c6064c88d4af555abe0480c417eb47eae3
Thanks,
-Mika
> Signed-off-by: Yunwei Zhang <yunwei.zhang at intel.com>
> Cc: Oscar Mateo <oscar.mateo at intel.com>
> Cc: Michel Thierry <michel.thierry at intel.com>
> Cc: Joonas Lahtinen <joonas.lahtinen at linux.intel.com>
> Cc: Chris Wilson <chris at chris-wilson.co.uk>
> Cc: Mika Kuoppala <mika.kuoppala at linux.intel.com>
> ---
> drivers/gpu/drm/i915/i915_drv.h | 1 +
> drivers/gpu/drm/i915/intel_engine_cs.c | 39 ++++++++++++++++++++++++++++++++--
> 2 files changed, 38 insertions(+), 2 deletions(-)
>
> diff --git a/drivers/gpu/drm/i915/i915_drv.h b/drivers/gpu/drm/i915/i915_drv.h
> index 800230b..2db2a04 100644
> --- a/drivers/gpu/drm/i915/i915_drv.h
> +++ b/drivers/gpu/drm/i915/i915_drv.h
> @@ -2297,6 +2297,7 @@ intel_info(const struct drm_i915_private *dev_priv)
>
> #define INTEL_GEN(dev_priv) ((dev_priv)->info.gen)
> #define INTEL_DEVID(dev_priv) ((dev_priv)->info.device_id)
> +#define INTEL_SSEU(dev_priv) ((dev_priv)->info.sseu)
>
> #define REVID_FOREVER 0xff
> #define INTEL_REVID(dev_priv) ((dev_priv)->drm.pdev->revision)
> diff --git a/drivers/gpu/drm/i915/intel_engine_cs.c b/drivers/gpu/drm/i915/intel_engine_cs.c
> index de09fa4..cc19e0a 100644
> --- a/drivers/gpu/drm/i915/intel_engine_cs.c
> +++ b/drivers/gpu/drm/i915/intel_engine_cs.c
> @@ -796,6 +796,27 @@ const char *i915_cache_level_str(struct drm_i915_private *i915, int type)
> }
> }
>
> +static u32 calculate_mcr(u32 mcr, struct drm_i915_private *dev_priv)
> +{
> + const struct sseu_dev_info *sseu = &(INTEL_SSEU(dev_priv));
> + u32 slice = fls(sseu->slice_mask);
> + u32 subslice = fls(sseu->subslice_mask[slice]);
> +
> + mcr &= ~(GEN8_MCR_SLICE_MASK | GEN8_MCR_SUBSLICE_MASK);
> + mcr |= GEN8_MCR_SLICE(slice) | GEN8_MCR_SUBSLICE(subslice);
> +
> + return mcr;
> +}
> +
> +static void wa_init_mcr(struct drm_i915_private *dev_priv)
> +{
> + u32 mcr;
> +
> + mcr = I915_READ(GEN8_MCR_SELECTOR);
> + mcr = calculate_mcr(mcr, dev_priv);
> + I915_WRITE(GEN8_MCR_SELECTOR, mcr);
> +}
> +
> static inline uint32_t
> read_subslice_reg(struct drm_i915_private *dev_priv, int slice,
> int subslice, i915_reg_t reg)
> @@ -828,18 +849,29 @@ read_subslice_reg(struct drm_i915_private *dev_priv, int slice,
> intel_uncore_forcewake_get__locked(dev_priv, fw_domains);
>
> mcr = I915_READ_FW(GEN8_MCR_SELECTOR);
> +
> /*
> * The HW expects the slice and sublice selectors to be reset to 0
> * after reading out the registers.
> */
> - WARN_ON_ONCE(mcr & mcr_slice_subslice_mask);
> + if (INTEL_GEN(dev_priv) < 10)
> + WARN_ON_ONCE(mcr & mcr_slice_subslice_mask);
> mcr &= ~mcr_slice_subslice_mask;
> mcr |= mcr_slice_subslice_select;
> I915_WRITE_FW(GEN8_MCR_SELECTOR, mcr);
>
> ret = I915_READ_FW(reg);
>
> - mcr &= ~mcr_slice_subslice_mask;
> + /*
> + * WaProgramMgsrForCorrectSliceSpecificMmioReads:cnl
> + * expects mcr to be programed to a enabled slice/subslice pair
> + * before any MMIO read into slice/subslice register
> + */
> + if (INTEL_GEN(dev_priv) < 10)
> + mcr &= ~mcr_slice_subslice_mask;
> + else
> + mcr = calculate_mcr(mcr, dev_priv);
> +
> I915_WRITE_FW(GEN8_MCR_SELECTOR, mcr);
>
> intel_uncore_forcewake_put__locked(dev_priv, fw_domains);
> @@ -1307,6 +1339,9 @@ static int cnl_init_workarounds(struct intel_engine_cs *engine)
> struct drm_i915_private *dev_priv = engine->i915;
> int ret;
>
> + /* WaProgramMgsrForCorrectSliceSpecificMmioReads: cnl */
> + wa_init_mcr(dev_priv);
> +
> /* WaDisableI2mCycleOnWRPort:cnl (pre-prod) */
> if (IS_CNL_REVID(dev_priv, CNL_REVID_B0, CNL_REVID_B0))
> I915_WRITE(GAMT_CHKN_BIT_REG,
> --
> 2.7.4
More information about the Intel-gfx
mailing list