[Intel-gfx] [PATCH v2 3/4] drm/i915: Check hdcp key loadability

Ville Syrjälä ville.syrjala at linux.intel.com
Thu Mar 29 14:24:38 UTC 2018


On Thu, Mar 29, 2018 at 07:39:07PM +0530, Ramalingam C wrote:
> HDCP1.4 key can be loaded, only when Power well #1 is enabled and cdclk
> is enabled. Using the I915 power well infrastruture, above requirement
> is verified.
> 
> This patch enables the hdcp initialization for HSW, BDW, and BXT.
> 
> v2:
>   Choose the PW# based on the platform.
> 
> Signed-off-by: Ramalingam C <ramalingam.c at intel.com>
> Reviewed-by: Sean Paul <seanpaul at chromium.org>
> ---
>  drivers/gpu/drm/i915/intel_hdcp.c | 41 +++++++++++++++++++++++++++++++++++++--
>  1 file changed, 39 insertions(+), 2 deletions(-)
> 
> diff --git a/drivers/gpu/drm/i915/intel_hdcp.c b/drivers/gpu/drm/i915/intel_hdcp.c
> index f77d956b2b18..d8af09b46a44 100644
> --- a/drivers/gpu/drm/i915/intel_hdcp.c
> +++ b/drivers/gpu/drm/i915/intel_hdcp.c
> @@ -37,6 +37,43 @@ static int intel_hdcp_poll_ksv_fifo(struct intel_digital_port *intel_dig_port,
>  	return 0;
>  }
>  
> +static bool hdcp_key_loadable(struct drm_i915_private *dev_priv)
> +{
> +	struct i915_power_domains *power_domains = &dev_priv->power_domains;
> +	struct i915_power_well *power_well;
> +	enum i915_power_well_id id;
> +	bool enabled = false;
> +
> +	/*
> +	 * On HSW and BDW, Display HW loads the Key as soon as Display resumes.
> +	 * On all BXT+, SW can load the keys only when the PW#1 is turned on.
> +	 */
> +	if (IS_HASWELL(dev_priv) || IS_BROADWELL(dev_priv))
> +		id = HSW_DISP_PW_GLOBAL;
> +	else
> +		id = SKL_DISP_PW_1;
> +
> +	mutex_lock(&power_domains->lock);
> +
> +	/* PG1 (power well #1) needs to be enabled */
> +	for_each_power_well(dev_priv, power_well) {
> +		if (power_well->id == id) {
> +			enabled = power_well->ops->is_enabled(dev_priv,
> +							      power_well);
> +			break;
> +		}
> +	}
> +	mutex_unlock(&power_domains->lock);
> +
> +	/*
> +	 * Another req for hdcp key loadability is enabled state of pll for
> +	 * cdclk. Without active crtc we wont land here. So we are assuming that
> +	 * cdclk is already on.
> +	 */
> +
> +	return enabled;
> +}
> +
>  static void intel_hdcp_clear_keys(struct drm_i915_private *dev_priv)
>  {
>  	I915_WRITE(HDCP_KEY_CONF, HDCP_CLEAR_KEYS_TRIGGER);
> @@ -615,8 +652,8 @@ static int _intel_hdcp_enable(struct intel_connector *connector)
>  	DRM_DEBUG_KMS("[%s:%d] HDCP is being enabled...\n",
>  		      connector->base.name, connector->base.base.id);
>  
> -	if (!(I915_READ(SKL_FUSE_STATUS) & SKL_FUSE_PG_DIST_STATUS(1))) {
> -		DRM_ERROR("PG1 is disabled, cannot load keys\n");
> +	if (!hdcp_key_loadable(dev_priv)) {
> +		DRM_ERROR("HDCP key Load is not possible\n");
>  		return -ENXIO;
>  	}

If you need the power well then why aren't you grabbing the correct
power domain reference somewhere?

-- 
Ville Syrjälä
Intel OTC


More information about the Intel-gfx mailing list