[Intel-gfx] [PATCH 2/5] drm/i915/cnl+: Move the combo PHY init/uninit code to a new file
Imre Deak
imre.deak at intel.com
Fri Nov 2 18:07:03 UTC 2018
Similarly to the GEN9_LP DPIO PHY code keep the CNL+ combo PHY code in a
separate file.
No functional change.
Suggested-by: Ville Syrjälä <ville.syrjala at linux.intel.com>
Cc: Paulo Zanoni <paulo.r.zanoni at intel.com>
Cc: Ville Syrjälä <ville.syrjala at linux.intel.com>
Cc: José Roberto de Souza <jose.souza at intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi at intel.com>
Signed-off-by: Imre Deak <imre.deak at intel.com>
---
drivers/gpu/drm/i915/Makefile | 1 +
drivers/gpu/drm/i915/i915_drv.h | 6 ++
drivers/gpu/drm/i915/intel_combo_phy.c | 159 ++++++++++++++++++++++++++++++++
drivers/gpu/drm/i915/intel_runtime_pm.c | 127 ++-----------------------
4 files changed, 174 insertions(+), 119 deletions(-)
create mode 100644 drivers/gpu/drm/i915/intel_combo_phy.c
diff --git a/drivers/gpu/drm/i915/Makefile b/drivers/gpu/drm/i915/Makefile
index 28c7d7884e88..1e7e9513bb10 100644
--- a/drivers/gpu/drm/i915/Makefile
+++ b/drivers/gpu/drm/i915/Makefile
@@ -113,6 +113,7 @@ i915-y += intel_audio.o \
intel_bios.o \
intel_cdclk.o \
intel_color.o \
+ intel_combo_phy.o \
intel_connector.o \
intel_display.o \
intel_dpio_phy.o \
diff --git a/drivers/gpu/drm/i915/i915_drv.h b/drivers/gpu/drm/i915/i915_drv.h
index 6157f8128cc5..62882e1ddbee 100644
--- a/drivers/gpu/drm/i915/i915_drv.h
+++ b/drivers/gpu/drm/i915/i915_drv.h
@@ -3571,6 +3571,12 @@ void vlv_phy_pre_encoder_enable(struct intel_encoder *encoder,
void vlv_phy_reset_lanes(struct intel_encoder *encoder,
const struct intel_crtc_state *old_crtc_state);
+/* intel_combo_phy.c */
+void icl_combo_phys_init(struct drm_i915_private *dev_priv);
+void icl_combo_phys_uninit(struct drm_i915_private *dev_priv);
+void cnl_combo_phys_init(struct drm_i915_private *dev_priv);
+void cnl_combo_phys_uninit(struct drm_i915_private *dev_priv);
+
int intel_gpu_freq(struct drm_i915_private *dev_priv, int val);
int intel_freq_opcode(struct drm_i915_private *dev_priv, int val);
u64 intel_rc6_residency_ns(struct drm_i915_private *dev_priv,
diff --git a/drivers/gpu/drm/i915/intel_combo_phy.c b/drivers/gpu/drm/i915/intel_combo_phy.c
new file mode 100644
index 000000000000..13184ae5a217
--- /dev/null
+++ b/drivers/gpu/drm/i915/intel_combo_phy.c
@@ -0,0 +1,159 @@
+/*
+ * Copyright © 2018 Intel Corporation
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a
+ * copy of this software and associated documentation files (the "Software"),
+ * to deal in the Software without restriction, including without limitation
+ * the rights to use, copy, modify, merge, publish, distribute, sublicense,
+ * and/or sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice (including the next
+ * paragraph) shall be included in all copies or substantial portions of the
+ * Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
+ * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER
+ * DEALINGS IN THE SOFTWARE.
+ */
+
+#include "intel_drv.h"
+
+enum {
+ PROCMON_0_85V_DOT_0,
+ PROCMON_0_95V_DOT_0,
+ PROCMON_0_95V_DOT_1,
+ PROCMON_1_05V_DOT_0,
+ PROCMON_1_05V_DOT_1,
+};
+
+static const struct cnl_procmon {
+ u32 dw1, dw9, dw10;
+} cnl_procmon_values[] = {
+ [PROCMON_0_85V_DOT_0] =
+ { .dw1 = 0x00000000, .dw9 = 0x62AB67BB, .dw10 = 0x51914F96, },
+ [PROCMON_0_95V_DOT_0] =
+ { .dw1 = 0x00000000, .dw9 = 0x86E172C7, .dw10 = 0x77CA5EAB, },
+ [PROCMON_0_95V_DOT_1] =
+ { .dw1 = 0x00000000, .dw9 = 0x93F87FE1, .dw10 = 0x8AE871C5, },
+ [PROCMON_1_05V_DOT_0] =
+ { .dw1 = 0x00000000, .dw9 = 0x98FA82DD, .dw10 = 0x89E46DC1, },
+ [PROCMON_1_05V_DOT_1] =
+ { .dw1 = 0x00440000, .dw9 = 0x9A00AB25, .dw10 = 0x8AE38FF1, },
+};
+
+/*
+ * CNL has just one set of registers, while ICL has two sets: one for port A and
+ * the other for port B. The CNL registers are equivalent to the ICL port A
+ * registers, that's why we call the ICL macros even though the function has CNL
+ * on its name.
+ */
+static void cnl_set_procmon_ref_values(struct drm_i915_private *dev_priv,
+ enum port port)
+{
+ const struct cnl_procmon *procmon;
+ u32 val;
+
+ val = I915_READ(ICL_PORT_COMP_DW3(port));
+ switch (val & (PROCESS_INFO_MASK | VOLTAGE_INFO_MASK)) {
+ default:
+ MISSING_CASE(val);
+ /* fall through */
+ case VOLTAGE_INFO_0_85V | PROCESS_INFO_DOT_0:
+ procmon = &cnl_procmon_values[PROCMON_0_85V_DOT_0];
+ break;
+ case VOLTAGE_INFO_0_95V | PROCESS_INFO_DOT_0:
+ procmon = &cnl_procmon_values[PROCMON_0_95V_DOT_0];
+ break;
+ case VOLTAGE_INFO_0_95V | PROCESS_INFO_DOT_1:
+ procmon = &cnl_procmon_values[PROCMON_0_95V_DOT_1];
+ break;
+ case VOLTAGE_INFO_1_05V | PROCESS_INFO_DOT_0:
+ procmon = &cnl_procmon_values[PROCMON_1_05V_DOT_0];
+ break;
+ case VOLTAGE_INFO_1_05V | PROCESS_INFO_DOT_1:
+ procmon = &cnl_procmon_values[PROCMON_1_05V_DOT_1];
+ break;
+ }
+
+ val = I915_READ(ICL_PORT_COMP_DW1(port));
+ val &= ~((0xff << 16) | 0xff);
+ val |= procmon->dw1;
+ I915_WRITE(ICL_PORT_COMP_DW1(port), val);
+
+ I915_WRITE(ICL_PORT_COMP_DW9(port), procmon->dw9);
+ I915_WRITE(ICL_PORT_COMP_DW10(port), procmon->dw10);
+}
+
+void cnl_combo_phys_init(struct drm_i915_private *dev_priv)
+{
+ u32 val;
+
+ val = I915_READ(CHICKEN_MISC_2);
+ val &= ~CNL_COMP_PWR_DOWN;
+ I915_WRITE(CHICKEN_MISC_2, val);
+
+ /* Dummy PORT_A to get the correct CNL register from the ICL macro */
+ cnl_set_procmon_ref_values(dev_priv, PORT_A);
+
+ val = I915_READ(CNL_PORT_COMP_DW0);
+ val |= COMP_INIT;
+ I915_WRITE(CNL_PORT_COMP_DW0, val);
+
+ val = I915_READ(CNL_PORT_CL1CM_DW5);
+ val |= CL_POWER_DOWN_ENABLE;
+ I915_WRITE(CNL_PORT_CL1CM_DW5, val);
+}
+
+void cnl_combo_phys_uninit(struct drm_i915_private *dev_priv)
+{
+ u32 val;
+
+ val = I915_READ(CHICKEN_MISC_2);
+ val |= CNL_COMP_PWR_DOWN;
+ I915_WRITE(CHICKEN_MISC_2, val);
+}
+
+void icl_combo_phys_init(struct drm_i915_private *dev_priv)
+{
+ enum port port;
+
+ for (port = PORT_A; port <= PORT_B; port++) {
+ u32 val;
+
+ val = I915_READ(ICL_PHY_MISC(port));
+ val &= ~ICL_PHY_MISC_DE_IO_COMP_PWR_DOWN;
+ I915_WRITE(ICL_PHY_MISC(port), val);
+
+ cnl_set_procmon_ref_values(dev_priv, port);
+
+ val = I915_READ(ICL_PORT_COMP_DW0(port));
+ val |= COMP_INIT;
+ I915_WRITE(ICL_PORT_COMP_DW0(port), val);
+
+ val = I915_READ(ICL_PORT_CL_DW5(port));
+ val |= CL_POWER_DOWN_ENABLE;
+ I915_WRITE(ICL_PORT_CL_DW5(port), val);
+ }
+}
+
+void icl_combo_phys_uninit(struct drm_i915_private *dev_priv)
+{
+ enum port port;
+
+ for (port = PORT_A; port <= PORT_B; port++) {
+ u32 val;
+
+ val = I915_READ(ICL_PHY_MISC(port));
+ val |= ICL_PHY_MISC_DE_IO_COMP_PWR_DOWN;
+ I915_WRITE(ICL_PHY_MISC(port), val);
+
+ val = I915_READ(ICL_PORT_COMP_DW0(port));
+ val &= ~COMP_INIT;
+ I915_WRITE(ICL_PORT_COMP_DW0(port), val);
+ }
+}
diff --git a/drivers/gpu/drm/i915/intel_runtime_pm.c b/drivers/gpu/drm/i915/intel_runtime_pm.c
index a7eea8423580..f8da471e81aa 100644
--- a/drivers/gpu/drm/i915/intel_runtime_pm.c
+++ b/drivers/gpu/drm/i915/intel_runtime_pm.c
@@ -3436,99 +3436,18 @@ void bxt_display_core_uninit(struct drm_i915_private *dev_priv)
usleep_range(10, 30); /* 10 us delay per Bspec */
}
-enum {
- PROCMON_0_85V_DOT_0,
- PROCMON_0_95V_DOT_0,
- PROCMON_0_95V_DOT_1,
- PROCMON_1_05V_DOT_0,
- PROCMON_1_05V_DOT_1,
-};
-
-static const struct cnl_procmon {
- u32 dw1, dw9, dw10;
-} cnl_procmon_values[] = {
- [PROCMON_0_85V_DOT_0] =
- { .dw1 = 0x00000000, .dw9 = 0x62AB67BB, .dw10 = 0x51914F96, },
- [PROCMON_0_95V_DOT_0] =
- { .dw1 = 0x00000000, .dw9 = 0x86E172C7, .dw10 = 0x77CA5EAB, },
- [PROCMON_0_95V_DOT_1] =
- { .dw1 = 0x00000000, .dw9 = 0x93F87FE1, .dw10 = 0x8AE871C5, },
- [PROCMON_1_05V_DOT_0] =
- { .dw1 = 0x00000000, .dw9 = 0x98FA82DD, .dw10 = 0x89E46DC1, },
- [PROCMON_1_05V_DOT_1] =
- { .dw1 = 0x00440000, .dw9 = 0x9A00AB25, .dw10 = 0x8AE38FF1, },
-};
-
-/*
- * CNL has just one set of registers, while ICL has two sets: one for port A and
- * the other for port B. The CNL registers are equivalent to the ICL port A
- * registers, that's why we call the ICL macros even though the function has CNL
- * on its name.
- */
-static void cnl_set_procmon_ref_values(struct drm_i915_private *dev_priv,
- enum port port)
-{
- const struct cnl_procmon *procmon;
- u32 val;
-
- val = I915_READ(ICL_PORT_COMP_DW3(port));
- switch (val & (PROCESS_INFO_MASK | VOLTAGE_INFO_MASK)) {
- default:
- MISSING_CASE(val);
- /* fall through */
- case VOLTAGE_INFO_0_85V | PROCESS_INFO_DOT_0:
- procmon = &cnl_procmon_values[PROCMON_0_85V_DOT_0];
- break;
- case VOLTAGE_INFO_0_95V | PROCESS_INFO_DOT_0:
- procmon = &cnl_procmon_values[PROCMON_0_95V_DOT_0];
- break;
- case VOLTAGE_INFO_0_95V | PROCESS_INFO_DOT_1:
- procmon = &cnl_procmon_values[PROCMON_0_95V_DOT_1];
- break;
- case VOLTAGE_INFO_1_05V | PROCESS_INFO_DOT_0:
- procmon = &cnl_procmon_values[PROCMON_1_05V_DOT_0];
- break;
- case VOLTAGE_INFO_1_05V | PROCESS_INFO_DOT_1:
- procmon = &cnl_procmon_values[PROCMON_1_05V_DOT_1];
- break;
- }
-
- val = I915_READ(ICL_PORT_COMP_DW1(port));
- val &= ~((0xff << 16) | 0xff);
- val |= procmon->dw1;
- I915_WRITE(ICL_PORT_COMP_DW1(port), val);
-
- I915_WRITE(ICL_PORT_COMP_DW9(port), procmon->dw9);
- I915_WRITE(ICL_PORT_COMP_DW10(port), procmon->dw10);
-}
-
static void cnl_display_core_init(struct drm_i915_private *dev_priv, bool resume)
{
struct i915_power_domains *power_domains = &dev_priv->power_domains;
struct i915_power_well *well;
- u32 val;
gen9_set_dc_state(dev_priv, DC_STATE_DISABLE);
/* 1. Enable PCH Reset Handshake */
intel_pch_reset_handshake(dev_priv, !HAS_PCH_NOP(dev_priv));
- /* 2. Enable Comp */
- val = I915_READ(CHICKEN_MISC_2);
- val &= ~CNL_COMP_PWR_DOWN;
- I915_WRITE(CHICKEN_MISC_2, val);
-
- /* Dummy PORT_A to get the correct CNL register from the ICL macro */
- cnl_set_procmon_ref_values(dev_priv, PORT_A);
-
- val = I915_READ(CNL_PORT_COMP_DW0);
- val |= COMP_INIT;
- I915_WRITE(CNL_PORT_COMP_DW0, val);
-
- /* 3. */
- val = I915_READ(CNL_PORT_CL1CM_DW5);
- val |= CL_POWER_DOWN_ENABLE;
- I915_WRITE(CNL_PORT_CL1CM_DW5, val);
+ /* 2-3. */
+ cnl_combo_phys_init(dev_priv);
/*
* 4. Enable Power Well 1 (PG1).
@@ -3553,7 +3472,6 @@ static void cnl_display_core_uninit(struct drm_i915_private *dev_priv)
{
struct i915_power_domains *power_domains = &dev_priv->power_domains;
struct i915_power_well *well;
- u32 val;
gen9_set_dc_state(dev_priv, DC_STATE_DISABLE);
@@ -3577,10 +3495,8 @@ static void cnl_display_core_uninit(struct drm_i915_private *dev_priv)
usleep_range(10, 30); /* 10 us delay per Bspec */
- /* 5. Disable Comp */
- val = I915_READ(CHICKEN_MISC_2);
- val |= CNL_COMP_PWR_DOWN;
- I915_WRITE(CHICKEN_MISC_2, val);
+ /* 5. */
+ cnl_combo_phys_uninit(dev_priv);
}
void icl_display_core_init(struct drm_i915_private *dev_priv,
@@ -3588,31 +3504,14 @@ void icl_display_core_init(struct drm_i915_private *dev_priv,
{
struct i915_power_domains *power_domains = &dev_priv->power_domains;
struct i915_power_well *well;
- enum port port;
- u32 val;
gen9_set_dc_state(dev_priv, DC_STATE_DISABLE);
/* 1. Enable PCH reset handshake. */
intel_pch_reset_handshake(dev_priv, !HAS_PCH_NOP(dev_priv));
- for (port = PORT_A; port <= PORT_B; port++) {
- /* 2. Enable DDI combo PHY comp. */
- val = I915_READ(ICL_PHY_MISC(port));
- val &= ~ICL_PHY_MISC_DE_IO_COMP_PWR_DOWN;
- I915_WRITE(ICL_PHY_MISC(port), val);
-
- cnl_set_procmon_ref_values(dev_priv, port);
-
- val = I915_READ(ICL_PORT_COMP_DW0(port));
- val |= COMP_INIT;
- I915_WRITE(ICL_PORT_COMP_DW0(port), val);
-
- /* 3. Set power down enable. */
- val = I915_READ(ICL_PORT_CL_DW5(port));
- val |= CL_POWER_DOWN_ENABLE;
- I915_WRITE(ICL_PORT_CL_DW5(port), val);
- }
+ /* 2-3. */
+ icl_combo_phys_init(dev_priv);
/*
* 4. Enable Power Well 1 (PG1).
@@ -3640,8 +3539,6 @@ void icl_display_core_uninit(struct drm_i915_private *dev_priv)
{
struct i915_power_domains *power_domains = &dev_priv->power_domains;
struct i915_power_well *well;
- enum port port;
- u32 val;
gen9_set_dc_state(dev_priv, DC_STATE_DISABLE);
@@ -3663,16 +3560,8 @@ void icl_display_core_uninit(struct drm_i915_private *dev_priv)
intel_power_well_disable(dev_priv, well);
mutex_unlock(&power_domains->lock);
- /* 5. Disable Comp */
- for (port = PORT_A; port <= PORT_B; port++) {
- val = I915_READ(ICL_PHY_MISC(port));
- val |= ICL_PHY_MISC_DE_IO_COMP_PWR_DOWN;
- I915_WRITE(ICL_PHY_MISC(port), val);
-
- val = I915_READ(ICL_PORT_COMP_DW0(port));
- val &= ~COMP_INIT;
- I915_WRITE(ICL_PORT_COMP_DW0(port), val);
- }
+ /* 5. */
+ icl_combo_phys_uninit(dev_priv);
}
static void chv_phy_control_init(struct drm_i915_private *dev_priv)
--
2.13.2
More information about the Intel-gfx
mailing list