[Intel-gfx] [PATCH 2/5] drm/i915/cnl+: Move the combo PHY init/uninit code to a new file
Rodrigo Vivi
rodrigo.vivi at intel.com
Fri Nov 2 19:25:56 UTC 2018
On Fri, Nov 02, 2018 at 08:07:03PM +0200, Imre Deak wrote:
> Similarly to the GEN9_LP DPIO PHY code keep the CNL+ combo PHY code in a
> separate file.
>
> No functional change.
>
> Suggested-by: Ville Syrjälä <ville.syrjala at linux.intel.com>
> Cc: Paulo Zanoni <paulo.r.zanoni at intel.com>
> Cc: Ville Syrjälä <ville.syrjala at linux.intel.com>
> Cc: José Roberto de Souza <jose.souza at intel.com>
> Cc: Rodrigo Vivi <rodrigo.vivi at intel.com>
> Signed-off-by: Imre Deak <imre.deak at intel.com>
> ---
> drivers/gpu/drm/i915/Makefile | 1 +
> drivers/gpu/drm/i915/i915_drv.h | 6 ++
> drivers/gpu/drm/i915/intel_combo_phy.c | 159 ++++++++++++++++++++++++++++++++
> drivers/gpu/drm/i915/intel_runtime_pm.c | 127 ++-----------------------
> 4 files changed, 174 insertions(+), 119 deletions(-)
> create mode 100644 drivers/gpu/drm/i915/intel_combo_phy.c
>
> diff --git a/drivers/gpu/drm/i915/Makefile b/drivers/gpu/drm/i915/Makefile
> index 28c7d7884e88..1e7e9513bb10 100644
> --- a/drivers/gpu/drm/i915/Makefile
> +++ b/drivers/gpu/drm/i915/Makefile
> @@ -113,6 +113,7 @@ i915-y += intel_audio.o \
> intel_bios.o \
> intel_cdclk.o \
> intel_color.o \
> + intel_combo_phy.o \
> intel_connector.o \
> intel_display.o \
> intel_dpio_phy.o \
> diff --git a/drivers/gpu/drm/i915/i915_drv.h b/drivers/gpu/drm/i915/i915_drv.h
> index 6157f8128cc5..62882e1ddbee 100644
> --- a/drivers/gpu/drm/i915/i915_drv.h
> +++ b/drivers/gpu/drm/i915/i915_drv.h
> @@ -3571,6 +3571,12 @@ void vlv_phy_pre_encoder_enable(struct intel_encoder *encoder,
> void vlv_phy_reset_lanes(struct intel_encoder *encoder,
> const struct intel_crtc_state *old_crtc_state);
>
> +/* intel_combo_phy.c */
> +void icl_combo_phys_init(struct drm_i915_private *dev_priv);
> +void icl_combo_phys_uninit(struct drm_i915_private *dev_priv);
> +void cnl_combo_phys_init(struct drm_i915_private *dev_priv);
> +void cnl_combo_phys_uninit(struct drm_i915_private *dev_priv);
> +
> int intel_gpu_freq(struct drm_i915_private *dev_priv, int val);
> int intel_freq_opcode(struct drm_i915_private *dev_priv, int val);
> u64 intel_rc6_residency_ns(struct drm_i915_private *dev_priv,
> diff --git a/drivers/gpu/drm/i915/intel_combo_phy.c b/drivers/gpu/drm/i915/intel_combo_phy.c
> new file mode 100644
> index 000000000000..13184ae5a217
> --- /dev/null
> +++ b/drivers/gpu/drm/i915/intel_combo_phy.c
> @@ -0,0 +1,159 @@
> +/*
> + * Copyright © 2018 Intel Corporation
> + *
> + * Permission is hereby granted, free of charge, to any person obtaining a
> + * copy of this software and associated documentation files (the "Software"),
> + * to deal in the Software without restriction, including without limitation
> + * the rights to use, copy, modify, merge, publish, distribute, sublicense,
> + * and/or sell copies of the Software, and to permit persons to whom the
> + * Software is furnished to do so, subject to the following conditions:
> + *
> + * The above copyright notice and this permission notice (including the next
> + * paragraph) shall be included in all copies or substantial portions of the
> + * Software.
> + *
> + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
> + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
> + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
> + * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
> + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
> + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER
> + * DEALINGS IN THE SOFTWARE.
> + */
SPDX identifiers or not?!
anyway:
Reviewed-by: Rodrigo Vivi <rodrigo.vivi at intel.com>
> +
> +#include "intel_drv.h"
> +
> +enum {
> + PROCMON_0_85V_DOT_0,
> + PROCMON_0_95V_DOT_0,
> + PROCMON_0_95V_DOT_1,
> + PROCMON_1_05V_DOT_0,
> + PROCMON_1_05V_DOT_1,
> +};
> +
> +static const struct cnl_procmon {
> + u32 dw1, dw9, dw10;
> +} cnl_procmon_values[] = {
> + [PROCMON_0_85V_DOT_0] =
> + { .dw1 = 0x00000000, .dw9 = 0x62AB67BB, .dw10 = 0x51914F96, },
> + [PROCMON_0_95V_DOT_0] =
> + { .dw1 = 0x00000000, .dw9 = 0x86E172C7, .dw10 = 0x77CA5EAB, },
> + [PROCMON_0_95V_DOT_1] =
> + { .dw1 = 0x00000000, .dw9 = 0x93F87FE1, .dw10 = 0x8AE871C5, },
> + [PROCMON_1_05V_DOT_0] =
> + { .dw1 = 0x00000000, .dw9 = 0x98FA82DD, .dw10 = 0x89E46DC1, },
> + [PROCMON_1_05V_DOT_1] =
> + { .dw1 = 0x00440000, .dw9 = 0x9A00AB25, .dw10 = 0x8AE38FF1, },
> +};
> +
> +/*
> + * CNL has just one set of registers, while ICL has two sets: one for port A and
> + * the other for port B. The CNL registers are equivalent to the ICL port A
> + * registers, that's why we call the ICL macros even though the function has CNL
> + * on its name.
> + */
> +static void cnl_set_procmon_ref_values(struct drm_i915_private *dev_priv,
> + enum port port)
> +{
> + const struct cnl_procmon *procmon;
> + u32 val;
> +
> + val = I915_READ(ICL_PORT_COMP_DW3(port));
> + switch (val & (PROCESS_INFO_MASK | VOLTAGE_INFO_MASK)) {
> + default:
> + MISSING_CASE(val);
> + /* fall through */
> + case VOLTAGE_INFO_0_85V | PROCESS_INFO_DOT_0:
> + procmon = &cnl_procmon_values[PROCMON_0_85V_DOT_0];
> + break;
> + case VOLTAGE_INFO_0_95V | PROCESS_INFO_DOT_0:
> + procmon = &cnl_procmon_values[PROCMON_0_95V_DOT_0];
> + break;
> + case VOLTAGE_INFO_0_95V | PROCESS_INFO_DOT_1:
> + procmon = &cnl_procmon_values[PROCMON_0_95V_DOT_1];
> + break;
> + case VOLTAGE_INFO_1_05V | PROCESS_INFO_DOT_0:
> + procmon = &cnl_procmon_values[PROCMON_1_05V_DOT_0];
> + break;
> + case VOLTAGE_INFO_1_05V | PROCESS_INFO_DOT_1:
> + procmon = &cnl_procmon_values[PROCMON_1_05V_DOT_1];
> + break;
> + }
> +
> + val = I915_READ(ICL_PORT_COMP_DW1(port));
> + val &= ~((0xff << 16) | 0xff);
> + val |= procmon->dw1;
> + I915_WRITE(ICL_PORT_COMP_DW1(port), val);
> +
> + I915_WRITE(ICL_PORT_COMP_DW9(port), procmon->dw9);
> + I915_WRITE(ICL_PORT_COMP_DW10(port), procmon->dw10);
> +}
> +
> +void cnl_combo_phys_init(struct drm_i915_private *dev_priv)
> +{
> + u32 val;
> +
> + val = I915_READ(CHICKEN_MISC_2);
> + val &= ~CNL_COMP_PWR_DOWN;
> + I915_WRITE(CHICKEN_MISC_2, val);
> +
> + /* Dummy PORT_A to get the correct CNL register from the ICL macro */
> + cnl_set_procmon_ref_values(dev_priv, PORT_A);
> +
> + val = I915_READ(CNL_PORT_COMP_DW0);
> + val |= COMP_INIT;
> + I915_WRITE(CNL_PORT_COMP_DW0, val);
> +
> + val = I915_READ(CNL_PORT_CL1CM_DW5);
> + val |= CL_POWER_DOWN_ENABLE;
> + I915_WRITE(CNL_PORT_CL1CM_DW5, val);
> +}
> +
> +void cnl_combo_phys_uninit(struct drm_i915_private *dev_priv)
> +{
> + u32 val;
> +
> + val = I915_READ(CHICKEN_MISC_2);
> + val |= CNL_COMP_PWR_DOWN;
> + I915_WRITE(CHICKEN_MISC_2, val);
> +}
> +
> +void icl_combo_phys_init(struct drm_i915_private *dev_priv)
> +{
> + enum port port;
> +
> + for (port = PORT_A; port <= PORT_B; port++) {
> + u32 val;
> +
> + val = I915_READ(ICL_PHY_MISC(port));
> + val &= ~ICL_PHY_MISC_DE_IO_COMP_PWR_DOWN;
> + I915_WRITE(ICL_PHY_MISC(port), val);
> +
> + cnl_set_procmon_ref_values(dev_priv, port);
> +
> + val = I915_READ(ICL_PORT_COMP_DW0(port));
> + val |= COMP_INIT;
> + I915_WRITE(ICL_PORT_COMP_DW0(port), val);
> +
> + val = I915_READ(ICL_PORT_CL_DW5(port));
> + val |= CL_POWER_DOWN_ENABLE;
> + I915_WRITE(ICL_PORT_CL_DW5(port), val);
> + }
> +}
> +
> +void icl_combo_phys_uninit(struct drm_i915_private *dev_priv)
> +{
> + enum port port;
> +
> + for (port = PORT_A; port <= PORT_B; port++) {
> + u32 val;
> +
> + val = I915_READ(ICL_PHY_MISC(port));
> + val |= ICL_PHY_MISC_DE_IO_COMP_PWR_DOWN;
> + I915_WRITE(ICL_PHY_MISC(port), val);
> +
> + val = I915_READ(ICL_PORT_COMP_DW0(port));
> + val &= ~COMP_INIT;
> + I915_WRITE(ICL_PORT_COMP_DW0(port), val);
> + }
> +}
> diff --git a/drivers/gpu/drm/i915/intel_runtime_pm.c b/drivers/gpu/drm/i915/intel_runtime_pm.c
> index a7eea8423580..f8da471e81aa 100644
> --- a/drivers/gpu/drm/i915/intel_runtime_pm.c
> +++ b/drivers/gpu/drm/i915/intel_runtime_pm.c
> @@ -3436,99 +3436,18 @@ void bxt_display_core_uninit(struct drm_i915_private *dev_priv)
> usleep_range(10, 30); /* 10 us delay per Bspec */
> }
>
> -enum {
> - PROCMON_0_85V_DOT_0,
> - PROCMON_0_95V_DOT_0,
> - PROCMON_0_95V_DOT_1,
> - PROCMON_1_05V_DOT_0,
> - PROCMON_1_05V_DOT_1,
> -};
> -
> -static const struct cnl_procmon {
> - u32 dw1, dw9, dw10;
> -} cnl_procmon_values[] = {
> - [PROCMON_0_85V_DOT_0] =
> - { .dw1 = 0x00000000, .dw9 = 0x62AB67BB, .dw10 = 0x51914F96, },
> - [PROCMON_0_95V_DOT_0] =
> - { .dw1 = 0x00000000, .dw9 = 0x86E172C7, .dw10 = 0x77CA5EAB, },
> - [PROCMON_0_95V_DOT_1] =
> - { .dw1 = 0x00000000, .dw9 = 0x93F87FE1, .dw10 = 0x8AE871C5, },
> - [PROCMON_1_05V_DOT_0] =
> - { .dw1 = 0x00000000, .dw9 = 0x98FA82DD, .dw10 = 0x89E46DC1, },
> - [PROCMON_1_05V_DOT_1] =
> - { .dw1 = 0x00440000, .dw9 = 0x9A00AB25, .dw10 = 0x8AE38FF1, },
> -};
> -
> -/*
> - * CNL has just one set of registers, while ICL has two sets: one for port A and
> - * the other for port B. The CNL registers are equivalent to the ICL port A
> - * registers, that's why we call the ICL macros even though the function has CNL
> - * on its name.
> - */
> -static void cnl_set_procmon_ref_values(struct drm_i915_private *dev_priv,
> - enum port port)
> -{
> - const struct cnl_procmon *procmon;
> - u32 val;
> -
> - val = I915_READ(ICL_PORT_COMP_DW3(port));
> - switch (val & (PROCESS_INFO_MASK | VOLTAGE_INFO_MASK)) {
> - default:
> - MISSING_CASE(val);
> - /* fall through */
> - case VOLTAGE_INFO_0_85V | PROCESS_INFO_DOT_0:
> - procmon = &cnl_procmon_values[PROCMON_0_85V_DOT_0];
> - break;
> - case VOLTAGE_INFO_0_95V | PROCESS_INFO_DOT_0:
> - procmon = &cnl_procmon_values[PROCMON_0_95V_DOT_0];
> - break;
> - case VOLTAGE_INFO_0_95V | PROCESS_INFO_DOT_1:
> - procmon = &cnl_procmon_values[PROCMON_0_95V_DOT_1];
> - break;
> - case VOLTAGE_INFO_1_05V | PROCESS_INFO_DOT_0:
> - procmon = &cnl_procmon_values[PROCMON_1_05V_DOT_0];
> - break;
> - case VOLTAGE_INFO_1_05V | PROCESS_INFO_DOT_1:
> - procmon = &cnl_procmon_values[PROCMON_1_05V_DOT_1];
> - break;
> - }
> -
> - val = I915_READ(ICL_PORT_COMP_DW1(port));
> - val &= ~((0xff << 16) | 0xff);
> - val |= procmon->dw1;
> - I915_WRITE(ICL_PORT_COMP_DW1(port), val);
> -
> - I915_WRITE(ICL_PORT_COMP_DW9(port), procmon->dw9);
> - I915_WRITE(ICL_PORT_COMP_DW10(port), procmon->dw10);
> -}
> -
> static void cnl_display_core_init(struct drm_i915_private *dev_priv, bool resume)
> {
> struct i915_power_domains *power_domains = &dev_priv->power_domains;
> struct i915_power_well *well;
> - u32 val;
>
> gen9_set_dc_state(dev_priv, DC_STATE_DISABLE);
>
> /* 1. Enable PCH Reset Handshake */
> intel_pch_reset_handshake(dev_priv, !HAS_PCH_NOP(dev_priv));
>
> - /* 2. Enable Comp */
> - val = I915_READ(CHICKEN_MISC_2);
> - val &= ~CNL_COMP_PWR_DOWN;
> - I915_WRITE(CHICKEN_MISC_2, val);
> -
> - /* Dummy PORT_A to get the correct CNL register from the ICL macro */
> - cnl_set_procmon_ref_values(dev_priv, PORT_A);
> -
> - val = I915_READ(CNL_PORT_COMP_DW0);
> - val |= COMP_INIT;
> - I915_WRITE(CNL_PORT_COMP_DW0, val);
> -
> - /* 3. */
> - val = I915_READ(CNL_PORT_CL1CM_DW5);
> - val |= CL_POWER_DOWN_ENABLE;
> - I915_WRITE(CNL_PORT_CL1CM_DW5, val);
> + /* 2-3. */
> + cnl_combo_phys_init(dev_priv);
>
> /*
> * 4. Enable Power Well 1 (PG1).
> @@ -3553,7 +3472,6 @@ static void cnl_display_core_uninit(struct drm_i915_private *dev_priv)
> {
> struct i915_power_domains *power_domains = &dev_priv->power_domains;
> struct i915_power_well *well;
> - u32 val;
>
> gen9_set_dc_state(dev_priv, DC_STATE_DISABLE);
>
> @@ -3577,10 +3495,8 @@ static void cnl_display_core_uninit(struct drm_i915_private *dev_priv)
>
> usleep_range(10, 30); /* 10 us delay per Bspec */
>
> - /* 5. Disable Comp */
> - val = I915_READ(CHICKEN_MISC_2);
> - val |= CNL_COMP_PWR_DOWN;
> - I915_WRITE(CHICKEN_MISC_2, val);
> + /* 5. */
> + cnl_combo_phys_uninit(dev_priv);
> }
>
> void icl_display_core_init(struct drm_i915_private *dev_priv,
> @@ -3588,31 +3504,14 @@ void icl_display_core_init(struct drm_i915_private *dev_priv,
> {
> struct i915_power_domains *power_domains = &dev_priv->power_domains;
> struct i915_power_well *well;
> - enum port port;
> - u32 val;
>
> gen9_set_dc_state(dev_priv, DC_STATE_DISABLE);
>
> /* 1. Enable PCH reset handshake. */
> intel_pch_reset_handshake(dev_priv, !HAS_PCH_NOP(dev_priv));
>
> - for (port = PORT_A; port <= PORT_B; port++) {
> - /* 2. Enable DDI combo PHY comp. */
> - val = I915_READ(ICL_PHY_MISC(port));
> - val &= ~ICL_PHY_MISC_DE_IO_COMP_PWR_DOWN;
> - I915_WRITE(ICL_PHY_MISC(port), val);
> -
> - cnl_set_procmon_ref_values(dev_priv, port);
> -
> - val = I915_READ(ICL_PORT_COMP_DW0(port));
> - val |= COMP_INIT;
> - I915_WRITE(ICL_PORT_COMP_DW0(port), val);
> -
> - /* 3. Set power down enable. */
> - val = I915_READ(ICL_PORT_CL_DW5(port));
> - val |= CL_POWER_DOWN_ENABLE;
> - I915_WRITE(ICL_PORT_CL_DW5(port), val);
> - }
> + /* 2-3. */
> + icl_combo_phys_init(dev_priv);
>
> /*
> * 4. Enable Power Well 1 (PG1).
> @@ -3640,8 +3539,6 @@ void icl_display_core_uninit(struct drm_i915_private *dev_priv)
> {
> struct i915_power_domains *power_domains = &dev_priv->power_domains;
> struct i915_power_well *well;
> - enum port port;
> - u32 val;
>
> gen9_set_dc_state(dev_priv, DC_STATE_DISABLE);
>
> @@ -3663,16 +3560,8 @@ void icl_display_core_uninit(struct drm_i915_private *dev_priv)
> intel_power_well_disable(dev_priv, well);
> mutex_unlock(&power_domains->lock);
>
> - /* 5. Disable Comp */
> - for (port = PORT_A; port <= PORT_B; port++) {
> - val = I915_READ(ICL_PHY_MISC(port));
> - val |= ICL_PHY_MISC_DE_IO_COMP_PWR_DOWN;
> - I915_WRITE(ICL_PHY_MISC(port), val);
> -
> - val = I915_READ(ICL_PORT_COMP_DW0(port));
> - val &= ~COMP_INIT;
> - I915_WRITE(ICL_PORT_COMP_DW0(port), val);
> - }
> + /* 5. */
> + icl_combo_phys_uninit(dev_priv);
> }
>
> static void chv_phy_control_init(struct drm_i915_private *dev_priv)
> --
> 2.13.2
>
More information about the Intel-gfx
mailing list