[Intel-gfx] [PATCH v5 24/28] drm/i915/dp: Configure Display stream splitter registers during DSC enable
Ville Syrjälä
ville.syrjala at linux.intel.com
Thu Oct 18 17:02:14 UTC 2018
On Fri, Oct 05, 2018 at 04:23:02PM -0700, Manasi Navare wrote:
> Display Stream Splitter registers need to be programmed to enable
> the joiner if two DSC engines are used and also to enable
> the left and the right DSC engines. This happens as part of
> the DSC enabling routine in the source in atomic commit.
>
> v2:
> * Rebase (Manasi)
>
> Cc: Jani Nikula <jani.nikula at linux.intel.com>
> Cc: Ville Syrjala <ville.syrjala at linux.intel.com>
> Cc: Anusha Srivatsa <anusha.srivatsa at intel.com>
> Signed-off-by: Manasi Navare <manasi.d.navare at intel.com>
> Reviewed-by: Anusha Srivatsa <anusha.srivatsa at intelcom>
> ---
> drivers/gpu/drm/i915/intel_vdsc.c | 22 ++++++++++++++++++++++
> 1 file changed, 22 insertions(+)
>
> diff --git a/drivers/gpu/drm/i915/intel_vdsc.c b/drivers/gpu/drm/i915/intel_vdsc.c
> index f2b3b30b6f5e..d3001647a887 100644
> --- a/drivers/gpu/drm/i915/intel_vdsc.c
> +++ b/drivers/gpu/drm/i915/intel_vdsc.c
> @@ -1009,6 +1009,12 @@ static void intel_dp_send_dsc_pps_sdp(struct intel_encoder *encoder,
> void intel_dsc_enable(struct intel_encoder *encoder,
> struct intel_crtc_state *crtc_state)
> {
> + struct intel_crtc *crtc = to_intel_crtc(crtc_state->base.crtc);
> + struct drm_i915_private *dev_priv = to_i915(encoder->base.dev);
> + enum pipe pipe = crtc->pipe;
> + i915_reg_t dss_ctl1_reg, dss_ctl2_reg;
> + u32 dss_ctl1_val = 0;
> + u32 dss_ctl2_val = 0;
>
> if (!crtc_state->dsc_params.compression_enable)
> return;
> @@ -1017,5 +1023,21 @@ void intel_dsc_enable(struct intel_encoder *encoder,
>
> intel_dp_send_dsc_pps_sdp(encoder, crtc_state);
>
> + /* Configure DSS_CTL registers for DSC */
> + if (encoder->type == INTEL_OUTPUT_EDP) {
Presumably this should check the transcoder instead? I see a lot of
similar confusion in other patches as well.
> + dss_ctl1_reg = DSS_CTL1;
> + dss_ctl2_reg = DSS_CTL2;
> + } else {
> + dss_ctl1_reg = ICL_PIPE_DSS_CTL1(pipe);
> + dss_ctl2_reg = ICL_PIPE_DSS_CTL2(pipe);
> + }
> + dss_ctl2_val |= LEFT_BRANCH_VDSC_ENABLE;
> + if (crtc_state->dsc_params.dsc_split) {
> + dss_ctl2_val |= RIGHT_BRANCH_VDSC_ENABLE;
> + dss_ctl1_val |= JOINER_ENABLE;
> + }
> + I915_WRITE(dss_ctl1_reg, dss_ctl1_val);
> + I915_WRITE(dss_ctl2_reg, dss_ctl2_val);
> +
> return;
> }
> --
> 2.18.0
--
Ville Syrjälä
Intel
More information about the Intel-gfx
mailing list