[Intel-gfx] [PATCH v7 11/23] drm/i915/icl: Configure DSI transcoders
Jani Nikula
jani.nikula at intel.com
Mon Oct 22 06:52:27 UTC 2018
On Sat, 20 Oct 2018, Madhav Chauhan <madhav.chauhan at intel.com> wrote:
> On 10/15/2018 7:57 PM, Jani Nikula wrote:
>> From: Madhav Chauhan <madhav.chauhan at intel.com>
>>
>> This patch programs DSI operation mode, pixel format,
>> BGR info, link calibration etc for the DSI transcoder.
>> This patch also extract BGR info of the DSI panel from
>> VBT and save it inside struct intel_dsi which used for
>> configuring DSI transcoder.
>>
>> v2: Rebase
>> v3: Use newly defined bitfields.
>>
>> v4 by Jani:
>> - Use intel_dsi_bitrate()
>> - Make bgr_enabled bool
>> - Use 0 instead of 0x0
>> - Replace DRM_ERROR() with MISSING_CASE() on pixel format and video mode
>> - Use is_vid_mode()
>
> v4 changes are fine.
Thanks for double-checking; I think just confirming that is fine. Pushed
up to and including this patch.
BR,
Jani.
>
> Regards,
> Madhav
>
>>
>> Signed-off-by: Madhav Chauhan <madhav.chauhan at intel.com>
>> Signed-off-by: Jani Nikula <jani.nikula at intel.com>
>> ---
>> drivers/gpu/drm/i915/icl_dsi.c | 87 +++++++++++++++++++++++++++++++++++-
>> drivers/gpu/drm/i915/intel_dsi.h | 3 ++
>> drivers/gpu/drm/i915/intel_dsi_vbt.c | 1 +
>> 3 files changed, 90 insertions(+), 1 deletion(-)
>>
>> diff --git a/drivers/gpu/drm/i915/icl_dsi.c b/drivers/gpu/drm/i915/icl_dsi.c
>> index 407c3065d08d..756c75d0c86c 100644
>> --- a/drivers/gpu/drm/i915/icl_dsi.c
>> +++ b/drivers/gpu/drm/i915/icl_dsi.c
>> @@ -27,7 +27,7 @@
>>
>> #include "intel_dsi.h"
>>
>> -static enum transcoder __attribute__((unused)) dsi_port_to_transcoder(enum port port)
>> +static enum transcoder dsi_port_to_transcoder(enum port port)
>> {
>> if (port == PORT_A)
>> return TRANSCODER_DSI_0;
>> @@ -340,6 +340,88 @@ static void gen11_dsi_setup_dphy_timings(struct intel_encoder *encoder)
>> }
>> }
>>
>> +static void gen11_dsi_configure_transcoder(struct intel_encoder *encoder)
>> +{
>> + struct drm_i915_private *dev_priv = to_i915(encoder->base.dev);
>> + struct intel_dsi *intel_dsi = enc_to_intel_dsi(&encoder->base);
>> + u32 tmp;
>> + enum port port;
>> + enum transcoder dsi_trans;
>> +
>> + for_each_dsi_port(port, intel_dsi->ports) {
>> + dsi_trans = dsi_port_to_transcoder(port);
>> + tmp = I915_READ(DSI_TRANS_FUNC_CONF(dsi_trans));
>> +
>> + if (intel_dsi->eotp_pkt)
>> + tmp &= ~EOTP_DISABLED;
>> + else
>> + tmp |= EOTP_DISABLED;
>> +
>> + /* enable link calibration if freq > 1.5Gbps */
>> + if (intel_dsi_bitrate(intel_dsi) >= 1500 * 1000) {
>> + tmp &= ~LINK_CALIBRATION_MASK;
>> + tmp |= CALIBRATION_ENABLED_INITIAL_ONLY;
>> + }
>> +
>> + /* configure continuous clock */
>> + tmp &= ~CONTINUOUS_CLK_MASK;
>> + if (intel_dsi->clock_stop)
>> + tmp |= CLK_ENTER_LP_AFTER_DATA;
>> + else
>> + tmp |= CLK_HS_CONTINUOUS;
>> +
>> + /* configure buffer threshold limit to minimum */
>> + tmp &= ~PIX_BUF_THRESHOLD_MASK;
>> + tmp |= PIX_BUF_THRESHOLD_1_4;
>> +
>> + /* set virtual channel to '0' */
>> + tmp &= ~PIX_VIRT_CHAN_MASK;
>> + tmp |= PIX_VIRT_CHAN(0);
>> +
>> + /* program BGR transmission */
>> + if (intel_dsi->bgr_enabled)
>> + tmp |= BGR_TRANSMISSION;
>> +
>> + /* select pixel format */
>> + tmp &= ~PIX_FMT_MASK;
>> + switch (intel_dsi->pixel_format) {
>> + default:
>> + MISSING_CASE(intel_dsi->pixel_format);
>> + /* fallthrough */
>> + case MIPI_DSI_FMT_RGB565:
>> + tmp |= PIX_FMT_RGB565;
>> + break;
>> + case MIPI_DSI_FMT_RGB666_PACKED:
>> + tmp |= PIX_FMT_RGB666_PACKED;
>> + break;
>> + case MIPI_DSI_FMT_RGB666:
>> + tmp |= PIX_FMT_RGB666_LOOSE;
>> + break;
>> + case MIPI_DSI_FMT_RGB888:
>> + tmp |= PIX_FMT_RGB888;
>> + break;
>> + }
>> +
>> + /* program DSI operation mode */
>> + if (is_vid_mode(intel_dsi)) {
>> + tmp &= ~OP_MODE_MASK;
>> + switch (intel_dsi->video_mode_format) {
>> + default:
>> + MISSING_CASE(intel_dsi->video_mode_format);
>> + /* fallthrough */
>> + case VIDEO_MODE_NON_BURST_WITH_SYNC_EVENTS:
>> + tmp |= VIDEO_MODE_SYNC_EVENT;
>> + break;
>> + case VIDEO_MODE_NON_BURST_WITH_SYNC_PULSE:
>> + tmp |= VIDEO_MODE_SYNC_PULSE;
>> + break;
>> + }
>> + }
>> +
>> + I915_WRITE(DSI_TRANS_FUNC_CONF(dsi_trans), tmp);
>> + }
>> +}
>> +
>> static void gen11_dsi_enable_port_and_phy(struct intel_encoder *encoder)
>> {
>> /* step 4a: power up all lanes of the DDI used by DSI */
>> @@ -356,6 +438,9 @@ static void gen11_dsi_enable_port_and_phy(struct intel_encoder *encoder)
>>
>> /* setup D-PHY timings */
>> gen11_dsi_setup_dphy_timings(encoder);
>> +
>> + /* Step (4h, 4i, 4j, 4k): Configure transcoder */
>> + gen11_dsi_configure_transcoder(encoder);
>> }
>>
>> static void __attribute__((unused))
>> diff --git a/drivers/gpu/drm/i915/intel_dsi.h b/drivers/gpu/drm/i915/intel_dsi.h
>> index 12b758ebefce..14567929de9a 100644
>> --- a/drivers/gpu/drm/i915/intel_dsi.h
>> +++ b/drivers/gpu/drm/i915/intel_dsi.h
>> @@ -81,6 +81,9 @@ struct intel_dsi {
>> u16 dcs_backlight_ports;
>> u16 dcs_cabc_ports;
>>
>> + /* RGB or BGR */
>> + bool bgr_enabled;
>> +
>> u8 pixel_overlap;
>> u32 port_bits;
>> u32 bw_timer;
>> diff --git a/drivers/gpu/drm/i915/intel_dsi_vbt.c b/drivers/gpu/drm/i915/intel_dsi_vbt.c
>> index 3035422aa0d6..cca071406c25 100644
>> --- a/drivers/gpu/drm/i915/intel_dsi_vbt.c
>> +++ b/drivers/gpu/drm/i915/intel_dsi_vbt.c
>> @@ -805,6 +805,7 @@ bool intel_dsi_vbt_init(struct intel_dsi *intel_dsi, u16 panel_id)
>> intel_dsi->bw_timer = mipi_config->dbi_bw_timer;
>> intel_dsi->video_frmt_cfg_bits =
>> mipi_config->bta_enabled ? DISABLE_VIDEO_BTA : 0;
>> + intel_dsi->bgr_enabled = mipi_config->rgb_flip;
>>
>> /* Starting point, adjusted depending on dual link and burst mode */
>> intel_dsi->pclk = mode->clock;
>
--
Jani Nikula, Intel Open Source Graphics Center
More information about the Intel-gfx
mailing list