[Intel-gfx] [PATCH 6/8] drm/i915: Clean up scaler setup.
Matt Roper
matthew.d.roper at intel.com
Thu Sep 20 23:19:16 UTC 2018
On Thu, Sep 20, 2018 at 12:27:09PM +0200, Maarten Lankhorst wrote:
> On skylake we can switch to a high quality scaler mode when only 1 out
> of 2 scalers are used, but on GLK and later bit 28 has a different
> meaning. Don't set it, and make clear the distinction between
> SKL and later PS values.
>
> Signed-off-by: Maarten Lankhorst <maarten.lankhorst at linux.intel.com>
Reviewed-by: Matt Roper <matthew.d.roper at intel.com>
> ---
> drivers/gpu/drm/i915/i915_reg.h | 7 +-
> drivers/gpu/drm/i915/intel_atomic.c | 108 +++++++++++++++------------
> drivers/gpu/drm/i915/intel_display.c | 2 +-
> 3 files changed, 66 insertions(+), 51 deletions(-)
>
> diff --git a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h
> index 4948b352bf4c..e7e6ca7f9665 100644
> --- a/drivers/gpu/drm/i915/i915_reg.h
> +++ b/drivers/gpu/drm/i915/i915_reg.h
> @@ -6850,11 +6850,12 @@ enum {
> #define _PS_2B_CTRL 0x68A80
> #define _PS_1C_CTRL 0x69180
> #define PS_SCALER_EN (1 << 31)
> -#define PS_SCALER_MODE_MASK (3 << 28)
> -#define PS_SCALER_MODE_DYN (0 << 28)
> -#define PS_SCALER_MODE_HQ (1 << 28)
> +#define SKL_PS_SCALER_MODE_MASK (3 << 28)
> +#define SKL_PS_SCALER_MODE_DYN (0 << 28)
> +#define SKL_PS_SCALER_MODE_HQ (1 << 28)
> #define SKL_PS_SCALER_MODE_NV12 (2 << 28)
> #define PS_SCALER_MODE_PLANAR (1 << 29)
> +#define PS_SCALER_MODE_PACKED (0 << 29)
> #define PS_PLANE_SEL_MASK (7 << 25)
> #define PS_PLANE_SEL(plane) (((plane) + 1) << 25)
> #define PS_FILTER_MASK (3 << 23)
> diff --git a/drivers/gpu/drm/i915/intel_atomic.c b/drivers/gpu/drm/i915/intel_atomic.c
> index b04952bacf77..40fba3f22f87 100644
> --- a/drivers/gpu/drm/i915/intel_atomic.c
> +++ b/drivers/gpu/drm/i915/intel_atomic.c
> @@ -203,6 +203,62 @@ intel_crtc_destroy_state(struct drm_crtc *crtc,
> drm_atomic_helper_crtc_destroy_state(crtc, state);
> }
>
> +static void intel_atomic_setup_scaler(struct intel_crtc_scaler_state *scaler_state,
> + int num_scalers_need, struct intel_crtc *intel_crtc,
> + const char *name, int idx,
> + struct intel_plane_state *plane_state,
> + int *scaler_id)
> +{
> + struct drm_i915_private *dev_priv = to_i915(intel_crtc->base.dev);
> + int j;
> + u32 mode;
> +
> + if (*scaler_id < 0) {
> + /* find a free scaler */
> + for (j = 0; j < intel_crtc->num_scalers; j++) {
> + if (scaler_state->scalers[j].in_use)
> + continue;
> +
> + *scaler_id = j;
> + scaler_state->scalers[*scaler_id].in_use = 1;
> + }
> + }
> +
> + if (WARN(*scaler_id < 0, "Cannot find scaler for %s:%d\n", name, idx))
> + return;
> +
> + /* set scaler mode */
> + if (plane_state && plane_state->base.fb &&
> + plane_state->base.fb->format->is_yuv &&
> + plane_state->base.fb->format->num_planes > 1) {
> + if (INTEL_GEN(dev_priv) == 9 &&
> + !IS_GEMINILAKE(dev_priv))
> + mode = SKL_PS_SCALER_MODE_NV12;
> + else
> + mode = PS_SCALER_MODE_PLANAR;
> +
> + } else if (INTEL_GEN(dev_priv) > 9 || IS_GEMINILAKE(dev_priv)) {
> + mode = PS_SCALER_MODE_PACKED;
> + } else if (num_scalers_need == 1 && intel_crtc->num_scalers > 1) {
> + /*
> + * when only 1 scaler is in use on a pipe with 2 scalers
> + * scaler 0 operates in high quality (HQ) mode.
> + * In this case use scaler 0 to take advantage of HQ mode
> + */
> + scaler_state->scalers[*scaler_id].in_use = 0;
> + *scaler_id = 0;
> + scaler_state->scalers[0].in_use = 1;
> + mode = SKL_PS_SCALER_MODE_HQ;
> + } else {
> + mode = SKL_PS_SCALER_MODE_DYN;
> + }
> +
> + DRM_DEBUG_KMS("Attached scaler id %u.%u to %s:%d\n",
> + intel_crtc->pipe, *scaler_id, name, idx);
> + scaler_state->scalers[*scaler_id].mode = mode;
> +}
> +
> +
> /**
> * intel_atomic_setup_scalers() - setup scalers for crtc per staged requests
> * @dev_priv: i915 device
> @@ -232,7 +288,7 @@ int intel_atomic_setup_scalers(struct drm_i915_private *dev_priv,
> struct drm_atomic_state *drm_state = crtc_state->base.state;
> struct intel_atomic_state *intel_state = to_intel_atomic_state(drm_state);
> int num_scalers_need;
> - int i, j;
> + int i;
>
> num_scalers_need = hweight32(scaler_state->scaler_users);
>
> @@ -304,59 +360,17 @@ int intel_atomic_setup_scalers(struct drm_i915_private *dev_priv,
> idx = plane->base.id;
>
> /* plane on different crtc cannot be a scaler user of this crtc */
> - if (WARN_ON(intel_plane->pipe != intel_crtc->pipe)) {
> + if (WARN_ON(intel_plane->pipe != intel_crtc->pipe))
> continue;
> - }
>
> plane_state = intel_atomic_get_new_plane_state(intel_state,
> intel_plane);
> scaler_id = &plane_state->scaler_id;
> }
>
> - if (*scaler_id < 0) {
> - /* find a free scaler */
> - for (j = 0; j < intel_crtc->num_scalers; j++) {
> - if (!scaler_state->scalers[j].in_use) {
> - scaler_state->scalers[j].in_use = 1;
> - *scaler_id = j;
> - DRM_DEBUG_KMS("Attached scaler id %u.%u to %s:%d\n",
> - intel_crtc->pipe, *scaler_id, name, idx);
> - break;
> - }
> - }
> - }
> -
> - if (WARN_ON(*scaler_id < 0)) {
> - DRM_DEBUG_KMS("Cannot find scaler for %s:%d\n", name, idx);
> - continue;
> - }
> -
> - /* set scaler mode */
> - if ((INTEL_GEN(dev_priv) >= 9) &&
> - plane_state && plane_state->base.fb &&
> - plane_state->base.fb->format->format ==
> - DRM_FORMAT_NV12) {
> - if (INTEL_GEN(dev_priv) == 9 &&
> - !IS_GEMINILAKE(dev_priv) &&
> - !IS_SKYLAKE(dev_priv))
> - scaler_state->scalers[*scaler_id].mode =
> - SKL_PS_SCALER_MODE_NV12;
> - else
> - scaler_state->scalers[*scaler_id].mode =
> - PS_SCALER_MODE_PLANAR;
> - } else if (num_scalers_need == 1 && intel_crtc->pipe != PIPE_C) {
> - /*
> - * when only 1 scaler is in use on either pipe A or B,
> - * scaler 0 operates in high quality (HQ) mode.
> - * In this case use scaler 0 to take advantage of HQ mode
> - */
> - *scaler_id = 0;
> - scaler_state->scalers[0].in_use = 1;
> - scaler_state->scalers[0].mode = PS_SCALER_MODE_HQ;
> - scaler_state->scalers[1].in_use = 0;
> - } else {
> - scaler_state->scalers[*scaler_id].mode = PS_SCALER_MODE_DYN;
> - }
> + intel_atomic_setup_scaler(scaler_state, num_scalers_need,
> + intel_crtc, name, idx,
> + plane_state, scaler_id);
> }
>
> return 0;
> diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c
> index 02374185b993..931898013506 100644
> --- a/drivers/gpu/drm/i915/intel_display.c
> +++ b/drivers/gpu/drm/i915/intel_display.c
> @@ -13963,7 +13963,7 @@ static void intel_crtc_init_scalers(struct intel_crtc *crtc,
> struct intel_scaler *scaler = &scaler_state->scalers[i];
>
> scaler->in_use = 0;
> - scaler->mode = PS_SCALER_MODE_DYN;
> + scaler->mode = 0;
> }
>
> scaler_state->scaler_id = -1;
> --
> 2.18.0
>
> _______________________________________________
> Intel-gfx mailing list
> Intel-gfx at lists.freedesktop.org
> https://lists.freedesktop.org/mailman/listinfo/intel-gfx
--
Matt Roper
Graphics Software Engineer
IoTG Platform Enabling & Development
Intel Corporation
(916) 356-2795
More information about the Intel-gfx
mailing list