[Intel-gfx] [PATCH] drm/i915: Clean up scaler setup, v2.
Maarten Lankhorst
maarten.lankhorst at linux.intel.com
Fri Sep 21 14:44:37 UTC 2018
On skylake we can switch to a high quality scaler mode when only 1 out
of 2 scalers are used, but on GLK and later bit 28 has a different
meaning. Don't set it, and make clear the distinction between
SKL and later PS values.
Changes since v1:
- Add missing break statement.
Signed-off-by: Maarten Lankhorst <maarten.lankhorst at linux.intel.com>
Reviewed-by: Matt Roper <matthew.d.roper at intel.com> #v1
---
drivers/gpu/drm/i915/i915_reg.h | 7 +-
drivers/gpu/drm/i915/intel_atomic.c | 109 +++++++++++++++------------
drivers/gpu/drm/i915/intel_display.c | 2 +-
3 files changed, 67 insertions(+), 51 deletions(-)
diff --git a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h
index 4948b352bf4c..e7e6ca7f9665 100644
--- a/drivers/gpu/drm/i915/i915_reg.h
+++ b/drivers/gpu/drm/i915/i915_reg.h
@@ -6850,11 +6850,12 @@ enum {
#define _PS_2B_CTRL 0x68A80
#define _PS_1C_CTRL 0x69180
#define PS_SCALER_EN (1 << 31)
-#define PS_SCALER_MODE_MASK (3 << 28)
-#define PS_SCALER_MODE_DYN (0 << 28)
-#define PS_SCALER_MODE_HQ (1 << 28)
+#define SKL_PS_SCALER_MODE_MASK (3 << 28)
+#define SKL_PS_SCALER_MODE_DYN (0 << 28)
+#define SKL_PS_SCALER_MODE_HQ (1 << 28)
#define SKL_PS_SCALER_MODE_NV12 (2 << 28)
#define PS_SCALER_MODE_PLANAR (1 << 29)
+#define PS_SCALER_MODE_PACKED (0 << 29)
#define PS_PLANE_SEL_MASK (7 << 25)
#define PS_PLANE_SEL(plane) (((plane) + 1) << 25)
#define PS_FILTER_MASK (3 << 23)
diff --git a/drivers/gpu/drm/i915/intel_atomic.c b/drivers/gpu/drm/i915/intel_atomic.c
index b04952bacf77..c23a6ec40f60 100644
--- a/drivers/gpu/drm/i915/intel_atomic.c
+++ b/drivers/gpu/drm/i915/intel_atomic.c
@@ -203,6 +203,63 @@ intel_crtc_destroy_state(struct drm_crtc *crtc,
drm_atomic_helper_crtc_destroy_state(crtc, state);
}
+static void intel_atomic_setup_scaler(struct intel_crtc_scaler_state *scaler_state,
+ int num_scalers_need, struct intel_crtc *intel_crtc,
+ const char *name, int idx,
+ struct intel_plane_state *plane_state,
+ int *scaler_id)
+{
+ struct drm_i915_private *dev_priv = to_i915(intel_crtc->base.dev);
+ int j;
+ u32 mode;
+
+ if (*scaler_id < 0) {
+ /* find a free scaler */
+ for (j = 0; j < intel_crtc->num_scalers; j++) {
+ if (scaler_state->scalers[j].in_use)
+ continue;
+
+ *scaler_id = j;
+ scaler_state->scalers[*scaler_id].in_use = 1;
+ break;
+ }
+ }
+
+ if (WARN(*scaler_id < 0, "Cannot find scaler for %s:%d\n", name, idx))
+ return;
+
+ /* set scaler mode */
+ if (plane_state && plane_state->base.fb &&
+ plane_state->base.fb->format->is_yuv &&
+ plane_state->base.fb->format->num_planes > 1) {
+ if (INTEL_GEN(dev_priv) == 9 &&
+ !IS_GEMINILAKE(dev_priv))
+ mode = SKL_PS_SCALER_MODE_NV12;
+ else
+ mode = PS_SCALER_MODE_PLANAR;
+
+ } else if (INTEL_GEN(dev_priv) > 9 || IS_GEMINILAKE(dev_priv)) {
+ mode = PS_SCALER_MODE_PACKED;
+ } else if (num_scalers_need == 1 && intel_crtc->num_scalers > 1) {
+ /*
+ * when only 1 scaler is in use on a pipe with 2 scalers
+ * scaler 0 operates in high quality (HQ) mode.
+ * In this case use scaler 0 to take advantage of HQ mode
+ */
+ scaler_state->scalers[*scaler_id].in_use = 0;
+ *scaler_id = 0;
+ scaler_state->scalers[0].in_use = 1;
+ mode = SKL_PS_SCALER_MODE_HQ;
+ } else {
+ mode = SKL_PS_SCALER_MODE_DYN;
+ }
+
+ DRM_DEBUG_KMS("Attached scaler id %u.%u to %s:%d\n",
+ intel_crtc->pipe, *scaler_id, name, idx);
+ scaler_state->scalers[*scaler_id].mode = mode;
+}
+
+
/**
* intel_atomic_setup_scalers() - setup scalers for crtc per staged requests
* @dev_priv: i915 device
@@ -232,7 +289,7 @@ int intel_atomic_setup_scalers(struct drm_i915_private *dev_priv,
struct drm_atomic_state *drm_state = crtc_state->base.state;
struct intel_atomic_state *intel_state = to_intel_atomic_state(drm_state);
int num_scalers_need;
- int i, j;
+ int i;
num_scalers_need = hweight32(scaler_state->scaler_users);
@@ -304,59 +361,17 @@ int intel_atomic_setup_scalers(struct drm_i915_private *dev_priv,
idx = plane->base.id;
/* plane on different crtc cannot be a scaler user of this crtc */
- if (WARN_ON(intel_plane->pipe != intel_crtc->pipe)) {
+ if (WARN_ON(intel_plane->pipe != intel_crtc->pipe))
continue;
- }
plane_state = intel_atomic_get_new_plane_state(intel_state,
intel_plane);
scaler_id = &plane_state->scaler_id;
}
- if (*scaler_id < 0) {
- /* find a free scaler */
- for (j = 0; j < intel_crtc->num_scalers; j++) {
- if (!scaler_state->scalers[j].in_use) {
- scaler_state->scalers[j].in_use = 1;
- *scaler_id = j;
- DRM_DEBUG_KMS("Attached scaler id %u.%u to %s:%d\n",
- intel_crtc->pipe, *scaler_id, name, idx);
- break;
- }
- }
- }
-
- if (WARN_ON(*scaler_id < 0)) {
- DRM_DEBUG_KMS("Cannot find scaler for %s:%d\n", name, idx);
- continue;
- }
-
- /* set scaler mode */
- if ((INTEL_GEN(dev_priv) >= 9) &&
- plane_state && plane_state->base.fb &&
- plane_state->base.fb->format->format ==
- DRM_FORMAT_NV12) {
- if (INTEL_GEN(dev_priv) == 9 &&
- !IS_GEMINILAKE(dev_priv) &&
- !IS_SKYLAKE(dev_priv))
- scaler_state->scalers[*scaler_id].mode =
- SKL_PS_SCALER_MODE_NV12;
- else
- scaler_state->scalers[*scaler_id].mode =
- PS_SCALER_MODE_PLANAR;
- } else if (num_scalers_need == 1 && intel_crtc->pipe != PIPE_C) {
- /*
- * when only 1 scaler is in use on either pipe A or B,
- * scaler 0 operates in high quality (HQ) mode.
- * In this case use scaler 0 to take advantage of HQ mode
- */
- *scaler_id = 0;
- scaler_state->scalers[0].in_use = 1;
- scaler_state->scalers[0].mode = PS_SCALER_MODE_HQ;
- scaler_state->scalers[1].in_use = 0;
- } else {
- scaler_state->scalers[*scaler_id].mode = PS_SCALER_MODE_DYN;
- }
+ intel_atomic_setup_scaler(scaler_state, num_scalers_need,
+ intel_crtc, name, idx,
+ plane_state, scaler_id);
}
return 0;
diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c
index 02374185b993..931898013506 100644
--- a/drivers/gpu/drm/i915/intel_display.c
+++ b/drivers/gpu/drm/i915/intel_display.c
@@ -13963,7 +13963,7 @@ static void intel_crtc_init_scalers(struct intel_crtc *crtc,
struct intel_scaler *scaler = &scaler_state->scalers[i];
scaler->in_use = 0;
- scaler->mode = PS_SCALER_MODE_DYN;
+ scaler->mode = 0;
}
scaler_state->scaler_id = -1;
--
2.18.0
More information about the Intel-gfx
mailing list