[Intel-gfx] [PATCH 6/9] drm/i915/display: description-based initialization for remaining ddi platforms
Jani Nikula
jani.nikula at linux.intel.com
Tue Dec 31 10:25:21 UTC 2019
On Mon, 23 Dec 2019, Lucas De Marchi <lucas.demarchi at intel.com> wrote:
> Support remaining platforms under HAS_DDI() by providing a slightly more
> complex is_port_present() hook. The downside is that now we call
> I915_READ(SFUSE_STRAP) for each port being initialized, but that's only
> on initialization: a few more mmio reads won't hurt.
>
> Alternatives would be to provide one hook per port, or to have a
> "pre_init()" hook that takes care of the mmio read. However I think this
> is simpler - we may need to adapt if future platforms don't follow the
> same initialization "template".
All of this really makes me wonder if we end up being *more* complicated
overall by trying very hard to make this generic, when, in reality, it
doesn't seem to be all that generic.
As I said, two relatively low hanging improvements would be a) moving
VBT specific hacks to intel_bios.c and b) adding port mask to
intel_device_info. Those two alone would go a long way in simplifying
intel_setup_outputs().
>
> Signed-off-by: Lucas De Marchi <lucas.demarchi at intel.com>
> ---
> drivers/gpu/drm/i915/display/intel_display.c | 72 +++++++++++++-------
> 1 file changed, 46 insertions(+), 26 deletions(-)
>
> diff --git a/drivers/gpu/drm/i915/display/intel_display.c b/drivers/gpu/drm/i915/display/intel_display.c
> index 6b4d320ff92c..ad85cf75c815 100644
> --- a/drivers/gpu/drm/i915/display/intel_display.c
> +++ b/drivers/gpu/drm/i915/display/intel_display.c
> @@ -16246,6 +16246,34 @@ static bool icl_is_port_present(struct drm_i915_private *i915,
> intel_bios_is_port_present(i915, PORT_F);
> }
>
> +static bool ddi_is_port_present(struct drm_i915_private *i915,
> + const struct intel_ddi_port_info *port_info)
> +{
> + /* keep I915_READ() happy */
Display could get rid of I915_READ and I915_WRITE after
https://patchwork.freedesktop.org/series/70298/ ...
BR,
Jani.
> + struct drm_i915_private *dev_priv = i915;
> +
> + if (port_info->port == PORT_A)
> + return I915_READ(DDI_BUF_CTL(PORT_A))
> + & DDI_INIT_DISPLAY_DETECTED;
> +
> + if (port_info->port == PORT_E)
> + return IS_GEN9_BC(dev_priv) &&
> + intel_bios_is_port_present(i915, PORT_E);
> +
> + switch (port_info->port) {
> + case PORT_B:
> + return I915_READ(SFUSE_STRAP) & SFUSE_STRAP_DDIB_DETECTED;
> + case PORT_C:
> + return I915_READ(SFUSE_STRAP) & SFUSE_STRAP_DDIC_DETECTED;
> + case PORT_D:
> + return I915_READ(SFUSE_STRAP) & SFUSE_STRAP_DDID_DETECTED;
> + case PORT_F:
> + return I915_READ(SFUSE_STRAP) & SFUSE_STRAP_DDIF_DETECTED;
> + default:
> + return false;
> + }
> +}
> +
> static const struct intel_output tgl_output = {
> .dsi_init = icl_dsi_init,
> .ddi_ports = {
> @@ -16296,11 +16324,24 @@ static const struct intel_output gen9lp_output = {
> },
> };
>
> +static const struct intel_output ddi_output = {
> + .is_port_present = ddi_is_port_present,
> + .ddi_ports = {
> + { .port = PORT_A },
> + { .port = PORT_B },
> + { .port = PORT_C },
> + { .port = PORT_D },
> + { .port = PORT_E },
> + { .port = PORT_F },
> + { .port = PORT_NONE }
> + }
> +};
> +
> /*
> * Use a description-based approach for platforms that can be supported with a
> * static table
> */
> -static void setup_ddi_outputs_desc(struct drm_i915_private *i915)
> +static void setup_ddi_outputs(struct drm_i915_private *i915)
> {
> const struct intel_output *output;
> const struct intel_ddi_port_info *port_info;
> @@ -16313,6 +16354,8 @@ static void setup_ddi_outputs_desc(struct drm_i915_private *i915)
> output = &icl_output;
> else if (IS_GEN9_LP(i915))
> output = &gen9lp_output;
> + else
> + output = &ddi_output;
>
> for (port_info = output->ddi_ports;
> port_info->port != PORT_NONE; port_info++) {
> @@ -16338,35 +16381,12 @@ static void intel_setup_outputs(struct drm_i915_private *dev_priv)
> return;
>
> if (INTEL_GEN(dev_priv) >= 11 || IS_GEN9_LP(dev_priv)) {
> - setup_ddi_outputs_desc(dev_priv);
> + setup_ddi_outputs(dev_priv);
> } else if (HAS_DDI(dev_priv)) {
> - int found;
> -
> if (intel_ddi_crt_present(dev_priv))
> intel_crt_init(dev_priv);
>
> - found = I915_READ(DDI_BUF_CTL(PORT_A)) & DDI_INIT_DISPLAY_DETECTED;
> - if (found)
> - intel_ddi_init(dev_priv, PORT_A);
> -
> - /* DDI B, C, D, and F detection is indicated by the SFUSE_STRAP
> - * register */
> - found = I915_READ(SFUSE_STRAP);
> -
> - if (found & SFUSE_STRAP_DDIB_DETECTED)
> - intel_ddi_init(dev_priv, PORT_B);
> - if (found & SFUSE_STRAP_DDIC_DETECTED)
> - intel_ddi_init(dev_priv, PORT_C);
> - if (found & SFUSE_STRAP_DDID_DETECTED)
> - intel_ddi_init(dev_priv, PORT_D);
> - if (found & SFUSE_STRAP_DDIF_DETECTED)
> - intel_ddi_init(dev_priv, PORT_F);
> - /*
> - * On SKL we don't have a way to detect DDI-E so we rely on VBT.
> - */
> - if (IS_GEN9_BC(dev_priv) &&
> - intel_bios_is_port_present(dev_priv, PORT_E))
> - intel_ddi_init(dev_priv, PORT_E);
> + setup_ddi_outputs(dev_priv);
> } else if (HAS_PCH_SPLIT(dev_priv)) {
> int found;
--
Jani Nikula, Intel Open Source Graphics Center
More information about the Intel-gfx
mailing list