[Intel-gfx] [PATCH] drm/i915/psr: Bump vblank evasion time for seamless updates
Ville Syrjälä
ville.syrjala at linux.intel.com
Wed Feb 13 16:30:10 UTC 2019
On Wed, Feb 13, 2019 at 04:21:42PM +0000, Chris Wilson wrote:
> Each set of registers we need to rewrite during a pageflip/modeset
> increases the required evasion window. Modesets with PSR enabled
> empirically take up to 350us to complete the register programming, so
> provide a corresponding boost to the evasion window.
We should have exited PSR before the evasion. Is that code not working?
>
> Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=105870
> Signed-off-by: Chris Wilson <chris at chris-wilson.co.uk>
> Cc: Jani Nikula <jani.nikula at intel.com>
> Cc: Ville Syrjälä <ville.syrjala at linux.intel.com>
> Cc: Paulo Zanoni <paulo.r.zanoni at intel.com>
> Cc: Jose Roberto de Souza <jose.souza at intel.com>
> ---
> drivers/gpu/drm/i915/intel_sprite.c | 20 ++++++++++++++++++--
> 1 file changed, 18 insertions(+), 2 deletions(-)
>
> diff --git a/drivers/gpu/drm/i915/intel_sprite.c b/drivers/gpu/drm/i915/intel_sprite.c
> index 610398607e8e..03cafb953538 100644
> --- a/drivers/gpu/drm/i915/intel_sprite.c
> +++ b/drivers/gpu/drm/i915/intel_sprite.c
> @@ -84,14 +84,30 @@ void intel_pipe_update_start(const struct intel_crtc_state *new_crtc_state)
> intel_crtc_has_type(new_crtc_state, INTEL_OUTPUT_DSI);
> DEFINE_WAIT(wait);
> u32 psr_status;
> + int evasion;
>
> vblank_start = adjusted_mode->crtc_vblank_start;
> if (adjusted_mode->flags & DRM_MODE_FLAG_INTERLACE)
> vblank_start = DIV_ROUND_UP(vblank_start, 2);
>
> + /*
> + * Estimate how long it will take to reprogram display registers.
> + *
> + * As we wish to avoid changing registers across the vblank to
> + * avoid register write tearing, where the new frame uses an incomplete
> + * mismash of state, we aim to complete our writes before the start
> + * of the vblank. So we must delay starting our writes until after our
> + * evasion window.
> + *
> + * Each additional bit of state adds a set of registers we need to
> + * reprogram, increasing our required evasion window.
> + */
> + evasion = VBLANK_EVASION_TIME_US;
> + if (dev_priv->psr.enabled || new_crtc_state->has_psr)
> + evasion += 300;
> +
> /* FIXME needs to be calibrated sensibly */
> - min = vblank_start - intel_usecs_to_scanlines(adjusted_mode,
> - VBLANK_EVASION_TIME_US);
> + min = vblank_start - intel_usecs_to_scanlines(adjusted_mode, evasion);
> max = vblank_start - 1;
>
> if (min <= 0 || max <= 0)
> --
> 2.20.1
--
Ville Syrjälä
Intel
More information about the Intel-gfx
mailing list