[Intel-gfx] [PATCH v10 1/6] drm/i915/tgl: Add DC3CO required register and bits

[Ville Syrjälä]

On Thu, Oct 03, 2019 at 01:47:33PM +0530, Anshuman Gupta wrote:
> Adding following definition to i915_reg.h
> 1. DC_STATE_EN register DC3CO bit fields and masks.
>    DC3CO enable bit will be used by driver to make DC3CO
>    ready for DMC f/w and status bit will be used as DC3CO
>    entry status.
> 2. Transcoder EXITLINE register and its bit fields and mask.
>    Transcoder EXITLINE enable bit represents PSR2 idle frame
>    reset should be applied at exit line and exitlines mask
>    represent required number of scanlines at which DC3CO
>    exit happens.
> 
>    B.Specs:49196
> 
> v1: Use of REG_BIT and using extra space for EXITLINE_ macro
>     definition. [Animesh]
> 
> Cc: Jani Nikula <jani.nikula at intel.com>
> Cc: Imre Deak <imre.deak at intel.com>
> Cc: Animesh Manna <animesh.manna at intel.com>
> Reviewed-by: Animesh Manna <animesh.manna at intel.com>
> Reviewed-by: Imre Deak <imre.deak at intel.com>
> Signed-off-by: Anshuman Gupta <anshuman.gupta at intel.com>
> ---
>  drivers/gpu/drm/i915/i915_reg.h | 8 ++++++++
>  1 file changed, 8 insertions(+)
> 
> diff --git a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h
> index eefd789b9a28..8fd93008214b 100644
> --- a/drivers/gpu/drm/i915/i915_reg.h
> +++ b/drivers/gpu/drm/i915/i915_reg.h
> @@ -4144,6 +4144,7 @@ enum {
>  #define _VTOTAL_A	0x6000c
>  #define _VBLANK_A	0x60010
>  #define _VSYNC_A	0x60014
> +#define _EXITLINE_A	0x60018
>  #define _PIPEASRC	0x6001c
>  #define _BCLRPAT_A	0x60020
>  #define _VSYNCSHIFT_A	0x60028
> @@ -4190,11 +4191,16 @@ enum {
>  #define VTOTAL(trans)		_MMIO_TRANS2(trans, _VTOTAL_A)
>  #define VBLANK(trans)		_MMIO_TRANS2(trans, _VBLANK_A)
>  #define VSYNC(trans)		_MMIO_TRANS2(trans, _VSYNC_A)
> +#define EXITLINE(trans)		_MMIO_TRANS2(trans, _EXITLINE_A)
>  #define BCLRPAT(trans)		_MMIO_TRANS2(trans, _BCLRPAT_A)
>  #define VSYNCSHIFT(trans)	_MMIO_TRANS2(trans, _VSYNCSHIFT_A)
>  #define PIPESRC(trans)		_MMIO_TRANS2(trans, _PIPEASRC)
>  #define PIPE_MULT(trans)	_MMIO_TRANS2(trans, _PIPE_MULT_A)
>  
> +#define   EXITLINE_ENABLE	REG_BIT(31)
> +#define   EXITLINE_MASK		REG_GENMASK(12, 0)
> +#define   EXITLINE_SHIFT	0

Why are these defines hanging mid-air?

> +
>  /*
>   * HSW+ eDP PSR registers
>   *
> @@ -10288,6 +10294,8 @@ enum skl_power_gate {
>  /* GEN9 DC */
>  #define DC_STATE_EN			_MMIO(0x45504)
>  #define  DC_STATE_DISABLE		0
> +#define  DC_STATE_EN_DC3CO		REG_BIT(30)
> +#define  DC_STATE_DC3CO_STATUS		REG_BIT(29)
>  #define  DC_STATE_EN_UPTO_DC5		(1 << 0)
>  #define  DC_STATE_EN_DC9		(1 << 3)
>  #define  DC_STATE_EN_UPTO_DC6		(2 << 0)
> -- 
> 2.21.0
> 
> _______________________________________________
> Intel-gfx mailing list
> Intel-gfx at lists.freedesktop.org
> https://lists.freedesktop.org/mailman/listinfo/intel-gfx

-- 
Ville Syrjälä
Intel