[Intel-gfx] [RFC 1/1] drm/i915/dsi: Add dsi_state in crtc_state
Vandita Kulkarni
vandita.kulkarni at intel.com
Wed Oct 16 12:52:36 UTC 2019
This patch add dsi_state which provides
dsi operation mode and the link mode.
These are needed in order to check if they
were differently configured by GOP.
In present case the GOP enables dsi in
periodic update mode, whereas we need
to enable it in TE_GATE command mode.
In which case a disable-enable sequence
would be required.
---
drivers/gpu/drm/i915/display/icl_dsi.c | 39 +++++++++++++++++++
.../drm/i915/display/intel_display_types.h | 12 ++++++
2 files changed, 51 insertions(+)
diff --git a/drivers/gpu/drm/i915/display/icl_dsi.c b/drivers/gpu/drm/i915/display/icl_dsi.c
index 6e398c33a524..0a9323e95866 100644
--- a/drivers/gpu/drm/i915/display/icl_dsi.c
+++ b/drivers/gpu/drm/i915/display/icl_dsi.c
@@ -1238,6 +1238,37 @@ static void gen11_dsi_get_timings(struct intel_encoder *encoder,
adjusted_mode->crtc_vblank_end = adjusted_mode->crtc_vtotal;
}
+static bool
+gen11_dsi_dual_link_enabled(struct drm_i915_private *dev_priv)
+{
+ u32 val1, val2;
+
+ val1 = I915_READ(PIPECONF(TRANSCODER_DSI_0)) &
+ I915_READ(PIPECONF(TRANSCODER_DSI_1));
+ val1 &= PIPECONF_ENABLE;
+
+ val2 = I915_READ(TRANS_DDI_FUNC_CTL2(TRANSCODER_DSI_0));
+ val2 &= PORT_SYNC_MODE_ENABLE;
+
+ return (val1 && val2);
+}
+
+static enum dsi_op_mode
+gen11_dsi_get_op_mode(struct drm_i915_private *dev_priv,
+ struct intel_dsi *intel_dsi)
+{
+ u32 val;
+ enum transcoder dsi_trans;
+
+ if (intel_dsi->ports == BIT(PORT_B))
+ dsi_trans = TRANSCODER_DSI_1;
+ else
+ dsi_trans = TRANSCODER_DSI_0;
+
+ val = I915_READ(DSI_TRANS_FUNC_CONF(dsi_trans));
+ return ((val &= OP_MODE_MASK) >> OP_MODE_SHIFT);
+}
+
static void gen11_dsi_get_config(struct intel_encoder *encoder,
struct intel_crtc_state *pipe_config)
{
@@ -1250,6 +1281,12 @@ static void gen11_dsi_get_config(struct intel_encoder *encoder,
cnl_calc_wrpll_link(dev_priv, &pipe_config->dpll_hw_state);
pipe_config->base.adjusted_mode.crtc_clock = intel_dsi->pclk;
+
+ pipe_config->dsi_state.dual_link_mode =
+ gen11_dsi_dual_link_enabled(dev_priv);
+ pipe_config->dsi_state.op_mode =
+ gen11_dsi_get_op_mode(dev_priv, intel_dsi);
+
if (intel_dsi->dual_link)
pipe_config->base.adjusted_mode.crtc_clock *= 2;
@@ -1283,6 +1320,8 @@ static int gen11_dsi_compute_config(struct intel_encoder *encoder,
else
pipe_config->cpu_transcoder = TRANSCODER_DSI_0;
+ pipe_config->dsi_state.op_mode = DSI_CMD_MODE_NO_GATE;
+ pipe_config->dsi_state.dual_link_mode = intel_dsi->dual_link;
pipe_config->clock_set = true;
pipe_config->port_clock = intel_dsi_bitrate(intel_dsi) / 5;
diff --git a/drivers/gpu/drm/i915/display/intel_display_types.h b/drivers/gpu/drm/i915/display/intel_display_types.h
index 40390d855815..f89917eb4b94 100644
--- a/drivers/gpu/drm/i915/display/intel_display_types.h
+++ b/drivers/gpu/drm/i915/display/intel_display_types.h
@@ -75,6 +75,13 @@ enum hdmi_force_audio {
HDMI_AUDIO_ON, /* force turn on HDMI audio */
};
+enum dsi_op_mode {
+ DSI_CMD_MODE_NO_GATE,
+ DSI_CMD_MODE_TE_GATE,
+ DSI_CMD_MODE_PERIODIC,
+ DSI_VIDEO_MODE,
+ };
+
/* "Broadcast RGB" property */
enum intel_broadcast_rgb {
INTEL_BROADCAST_RGB_AUTO,
@@ -861,6 +868,11 @@ struct intel_crtc_state {
u32 ctrl, div;
} dsi_pll;
+ struct {
+ enum dsi_op_mode op_mode;
+ bool dual_link_mode;
+ } dsi_state;
+
int pipe_bpp;
struct intel_link_m_n dp_m_n;
--
2.21.0.5.gaeb582a
More information about the Intel-gfx
mailing list