[Intel-gfx] [PATCH 3/8] drm/i915: Combine bxt_set_cdclk and cnl_set_cdclk
Matt Roper
matthew.d.roper at intel.com
Sat Sep 7 00:21:38 UTC 2019
We'd previously combined ICL/TGL logic into the cnl_set_cdclk function,
but BXT is pretty similar as well. Roll the cnl/icl/tgl logic back into
the bxt function; the only things we really need to handle separately
are punit notification and calling different functions to enable/disable
the cdclk PLL.
Cc: Ville Syrjälä <ville.syrjala at linux.intel.com>
Signed-off-by: Matt Roper <matthew.d.roper at intel.com>
---
drivers/gpu/drm/i915/display/intel_cdclk.c | 267 +++++++++------------
1 file changed, 119 insertions(+), 148 deletions(-)
diff --git a/drivers/gpu/drm/i915/display/intel_cdclk.c b/drivers/gpu/drm/i915/display/intel_cdclk.c
index 8ac31f8775f0..6b5b1328a3fa 100644
--- a/drivers/gpu/drm/i915/display/intel_cdclk.c
+++ b/drivers/gpu/drm/i915/display/intel_cdclk.c
@@ -1449,6 +1449,39 @@ static void bxt_de_pll_enable(struct drm_i915_private *dev_priv, int vco)
dev_priv->cdclk.hw.vco = vco;
}
+static void cnl_cdclk_pll_disable(struct drm_i915_private *dev_priv)
+{
+ u32 val;
+
+ val = I915_READ(BXT_DE_PLL_ENABLE);
+ val &= ~BXT_DE_PLL_PLL_ENABLE;
+ I915_WRITE(BXT_DE_PLL_ENABLE, val);
+
+ /* Timeout 200us */
+ if (wait_for((I915_READ(BXT_DE_PLL_ENABLE) & BXT_DE_PLL_LOCK) == 0, 1))
+ DRM_ERROR("timeout waiting for CDCLK PLL unlock\n");
+
+ dev_priv->cdclk.hw.vco = 0;
+}
+
+static void cnl_cdclk_pll_enable(struct drm_i915_private *dev_priv, int vco)
+{
+ int ratio = DIV_ROUND_CLOSEST(vco, dev_priv->cdclk.hw.ref);
+ u32 val;
+
+ val = CNL_CDCLK_PLL_RATIO(ratio);
+ I915_WRITE(BXT_DE_PLL_ENABLE, val);
+
+ val |= BXT_DE_PLL_PLL_ENABLE;
+ I915_WRITE(BXT_DE_PLL_ENABLE, val);
+
+ /* Timeout 200us */
+ if (wait_for((I915_READ(BXT_DE_PLL_ENABLE) & BXT_DE_PLL_LOCK) != 0, 1))
+ DRM_ERROR("timeout waiting for CDCLK PLL lock\n");
+
+ dev_priv->cdclk.hw.vco = vco;
+}
+
static void bxt_set_cdclk(struct drm_i915_private *dev_priv,
const struct intel_cdclk_state *cdclk_state,
enum pipe pipe)
@@ -1458,6 +1491,27 @@ static void bxt_set_cdclk(struct drm_i915_private *dev_priv,
u32 val, divider;
int ret;
+ /* Inform power controller of upcoming frequency change. */
+ if (INTEL_GEN(dev_priv) >= 10)
+ ret = skl_pcode_request(dev_priv, SKL_PCODE_CDCLK_CONTROL,
+ SKL_CDCLK_PREPARE_FOR_CHANGE,
+ SKL_CDCLK_READY_FOR_CHANGE,
+ SKL_CDCLK_READY_FOR_CHANGE, 3);
+ else
+ /*
+ * BSpec requires us to wait up to 150usec, but that leads to
+ * timeouts; the 2ms used here is based on experiment.
+ */
+ ret = sandybridge_pcode_write_timeout(dev_priv,
+ HSW_PCODE_DE_WRITE_FREQ_REQ,
+ 0x80000000, 150, 2);
+
+ if (ret) {
+ DRM_ERROR("Failed to inform PCU about cdclk change (err %d, freq %d)\n",
+ ret, cdclk);
+ return;
+ }
+
/* cdclk = vco / 2 / div{1,1.5,2,4} */
switch (DIV_ROUND_CLOSEST(vco, cdclk)) {
default:
@@ -1468,63 +1522,82 @@ static void bxt_set_cdclk(struct drm_i915_private *dev_priv,
divider = BXT_CDCLK_CD2X_DIV_SEL_1;
break;
case 3:
- WARN(IS_GEMINILAKE(dev_priv), "Unsupported divider\n");
+ WARN(IS_GEMINILAKE(dev_priv) || INTEL_GEN(dev_priv) >= 10,
+ "Unsupported divider\n");
divider = BXT_CDCLK_CD2X_DIV_SEL_1_5;
break;
case 4:
divider = BXT_CDCLK_CD2X_DIV_SEL_2;
break;
case 8:
+ WARN(INTEL_GEN(dev_priv) >= 10, "Unsupported divider\n");
divider = BXT_CDCLK_CD2X_DIV_SEL_4;
break;
}
- /*
- * Inform power controller of upcoming frequency change. BSpec
- * requires us to wait up to 150usec, but that leads to timeouts;
- * the 2ms used here is based on experiment.
- */
- ret = sandybridge_pcode_write_timeout(dev_priv,
- HSW_PCODE_DE_WRITE_FREQ_REQ,
- 0x80000000, 150, 2);
- if (ret) {
- DRM_ERROR("PCode CDCLK freq change notify failed (err %d, freq %d)\n",
- ret, cdclk);
- return;
- }
+ if (INTEL_GEN(dev_priv) >= 10) {
+ if (dev_priv->cdclk.hw.vco != 0 &&
+ dev_priv->cdclk.hw.vco != vco)
+ cnl_cdclk_pll_disable(dev_priv);
- if (dev_priv->cdclk.hw.vco != 0 &&
- dev_priv->cdclk.hw.vco != vco)
- bxt_de_pll_disable(dev_priv);
+ if (dev_priv->cdclk.hw.vco != vco)
+ cnl_cdclk_pll_enable(dev_priv, vco);
- if (dev_priv->cdclk.hw.vco != vco)
- bxt_de_pll_enable(dev_priv, vco);
+ } else {
+ if (dev_priv->cdclk.hw.vco != 0 &&
+ dev_priv->cdclk.hw.vco != vco)
+ bxt_de_pll_disable(dev_priv);
+
+ if (dev_priv->cdclk.hw.vco != vco)
+ bxt_de_pll_enable(dev_priv, vco);
+ }
val = divider | skl_cdclk_decimal(cdclk);
- if (pipe == INVALID_PIPE)
- val |= BXT_CDCLK_CD2X_PIPE_NONE;
- else
- val |= BXT_CDCLK_CD2X_PIPE(pipe);
+
+ if (INTEL_GEN(dev_priv) >= 12) {
+ if (pipe == INVALID_PIPE)
+ val |= TGL_CDCLK_CD2X_PIPE_NONE;
+ else
+ val |= TGL_CDCLK_CD2X_PIPE(pipe);
+ } else if (INTEL_GEN(dev_priv) >= 11) {
+ if (pipe == INVALID_PIPE)
+ val |= ICL_CDCLK_CD2X_PIPE_NONE;
+ else
+ val |= ICL_CDCLK_CD2X_PIPE(pipe);
+ } else {
+ if (pipe == INVALID_PIPE)
+ val |= BXT_CDCLK_CD2X_PIPE_NONE;
+ else
+ val |= BXT_CDCLK_CD2X_PIPE(pipe);
+ }
+
/*
* Disable SSA Precharge when CD clock frequency < 500 MHz,
* enable otherwise.
*/
- if (cdclk >= 500000)
+ if (IS_GEN9_LP(dev_priv) && cdclk >= 500000)
val |= BXT_CDCLK_SSA_PRECHARGE_ENABLE;
I915_WRITE(CDCLK_CTL, val);
if (pipe != INVALID_PIPE)
intel_wait_for_vblank(dev_priv, pipe);
- /*
- * The timeout isn't specified, the 2ms used here is based on
- * experiment.
- * FIXME: Waiting for the request completion could be delayed until
- * the next PCODE request based on BSpec.
- */
- ret = sandybridge_pcode_write_timeout(dev_priv,
- HSW_PCODE_DE_WRITE_FREQ_REQ,
- cdclk_state->voltage_level, 150, 2);
+ if (INTEL_GEN(dev_priv) >= 10) {
+ ret = sandybridge_pcode_write(dev_priv, SKL_PCODE_CDCLK_CONTROL,
+ cdclk_state->voltage_level);
+ } else {
+ /*
+ * The timeout isn't specified, the 2ms used here is based on
+ * experiment.
+ * FIXME: Waiting for the request completion could be delayed
+ * until the next PCODE request based on BSpec.
+ */
+ ret = sandybridge_pcode_write_timeout(dev_priv,
+ HSW_PCODE_DE_WRITE_FREQ_REQ,
+ cdclk_state->voltage_level,
+ 150, 2);
+ }
+
if (ret) {
DRM_ERROR("PCode CDCLK freq set failed, (err %d, freq %d)\n",
ret, cdclk);
@@ -1532,6 +1605,13 @@ static void bxt_set_cdclk(struct drm_i915_private *dev_priv,
}
intel_update_cdclk(dev_priv);
+
+ if (INTEL_GEN(dev_priv) >= 10)
+ /*
+ * Can't read out the voltage level :(
+ * Let's just assume everything is as expected.
+ */
+ dev_priv->cdclk.hw.voltage_level = cdclk_state->voltage_level;
}
static void bxt_sanitize_cdclk(struct drm_i915_private *dev_priv)
@@ -1617,115 +1697,6 @@ static void bxt_uninit_cdclk(struct drm_i915_private *dev_priv)
bxt_set_cdclk(dev_priv, &cdclk_state, INVALID_PIPE);
}
-static void cnl_cdclk_pll_disable(struct drm_i915_private *dev_priv)
-{
- u32 val;
-
- val = I915_READ(BXT_DE_PLL_ENABLE);
- val &= ~BXT_DE_PLL_PLL_ENABLE;
- I915_WRITE(BXT_DE_PLL_ENABLE, val);
-
- /* Timeout 200us */
- if (wait_for((I915_READ(BXT_DE_PLL_ENABLE) & BXT_DE_PLL_LOCK) == 0, 1))
- DRM_ERROR("timeout waiting for CDCLK PLL unlock\n");
-
- dev_priv->cdclk.hw.vco = 0;
-}
-
-static void cnl_cdclk_pll_enable(struct drm_i915_private *dev_priv, int vco)
-{
- int ratio = DIV_ROUND_CLOSEST(vco, dev_priv->cdclk.hw.ref);
- u32 val;
-
- val = CNL_CDCLK_PLL_RATIO(ratio);
- I915_WRITE(BXT_DE_PLL_ENABLE, val);
-
- val |= BXT_DE_PLL_PLL_ENABLE;
- I915_WRITE(BXT_DE_PLL_ENABLE, val);
-
- /* Timeout 200us */
- if (wait_for((I915_READ(BXT_DE_PLL_ENABLE) & BXT_DE_PLL_LOCK) != 0, 1))
- DRM_ERROR("timeout waiting for CDCLK PLL lock\n");
-
- dev_priv->cdclk.hw.vco = vco;
-}
-
-static void cnl_set_cdclk(struct drm_i915_private *dev_priv,
- const struct intel_cdclk_state *cdclk_state,
- enum pipe pipe)
-{
- int cdclk = cdclk_state->cdclk;
- int vco = cdclk_state->vco;
- u32 val, divider;
- int ret;
-
- ret = skl_pcode_request(dev_priv, SKL_PCODE_CDCLK_CONTROL,
- SKL_CDCLK_PREPARE_FOR_CHANGE,
- SKL_CDCLK_READY_FOR_CHANGE,
- SKL_CDCLK_READY_FOR_CHANGE, 3);
- if (ret) {
- DRM_ERROR("Failed to inform PCU about cdclk change (%d)\n",
- ret);
- return;
- }
-
- /* cdclk = vco / 2 / div{1,2} */
- switch (DIV_ROUND_CLOSEST(vco, cdclk)) {
- default:
- WARN_ON(cdclk != dev_priv->cdclk.hw.bypass);
- WARN_ON(vco != 0);
- /* fall through */
- case 2:
- divider = BXT_CDCLK_CD2X_DIV_SEL_1;
- break;
- case 4:
- divider = BXT_CDCLK_CD2X_DIV_SEL_2;
- break;
- }
-
- if (dev_priv->cdclk.hw.vco != 0 &&
- dev_priv->cdclk.hw.vco != vco)
- cnl_cdclk_pll_disable(dev_priv);
-
- if (dev_priv->cdclk.hw.vco != vco)
- cnl_cdclk_pll_enable(dev_priv, vco);
-
- val = divider | skl_cdclk_decimal(cdclk);
-
- if (INTEL_GEN(dev_priv) >= 12) {
- if (pipe == INVALID_PIPE)
- val |= TGL_CDCLK_CD2X_PIPE_NONE;
- else
- val |= TGL_CDCLK_CD2X_PIPE(pipe);
- } else if (INTEL_GEN(dev_priv) >= 11) {
- if (pipe == INVALID_PIPE)
- val |= ICL_CDCLK_CD2X_PIPE_NONE;
- else
- val |= ICL_CDCLK_CD2X_PIPE(pipe);
- } else {
- if (pipe == INVALID_PIPE)
- val |= BXT_CDCLK_CD2X_PIPE_NONE;
- else
- val |= BXT_CDCLK_CD2X_PIPE(pipe);
- }
- I915_WRITE(CDCLK_CTL, val);
-
- if (pipe != INVALID_PIPE)
- intel_wait_for_vblank(dev_priv, pipe);
-
- /* inform PCU of the change */
- sandybridge_pcode_write(dev_priv, SKL_PCODE_CDCLK_CONTROL,
- cdclk_state->voltage_level);
-
- intel_update_cdclk(dev_priv);
-
- /*
- * Can't read out the voltage level :(
- * Let's just assume everything is as expected.
- */
- dev_priv->cdclk.hw.voltage_level = cdclk_state->voltage_level;
-}
-
static void cnl_sanitize_cdclk(struct drm_i915_private *dev_priv)
{
u32 cdctl, expected;
@@ -1806,7 +1777,7 @@ static void icl_init_cdclk(struct drm_i915_private *dev_priv)
sanitized_state.voltage_level =
icl_calc_voltage_level(sanitized_state.cdclk);
- cnl_set_cdclk(dev_priv, &sanitized_state, INVALID_PIPE);
+ bxt_set_cdclk(dev_priv, &sanitized_state, INVALID_PIPE);
}
static void icl_uninit_cdclk(struct drm_i915_private *dev_priv)
@@ -1822,7 +1793,7 @@ static void icl_uninit_cdclk(struct drm_i915_private *dev_priv)
cdclk_state.voltage_level =
icl_calc_voltage_level(cdclk_state.cdclk);
- cnl_set_cdclk(dev_priv, &cdclk_state, INVALID_PIPE);
+ bxt_set_cdclk(dev_priv, &cdclk_state, INVALID_PIPE);
}
static void cnl_init_cdclk(struct drm_i915_private *dev_priv)
@@ -1841,7 +1812,7 @@ static void cnl_init_cdclk(struct drm_i915_private *dev_priv)
cdclk_state.vco = calc_cdclk_pll_vco(dev_priv, cdclk_state.cdclk);
cdclk_state.voltage_level = cnl_calc_voltage_level(cdclk_state.cdclk);
- cnl_set_cdclk(dev_priv, &cdclk_state, INVALID_PIPE);
+ bxt_set_cdclk(dev_priv, &cdclk_state, INVALID_PIPE);
}
static void cnl_uninit_cdclk(struct drm_i915_private *dev_priv)
@@ -1852,7 +1823,7 @@ static void cnl_uninit_cdclk(struct drm_i915_private *dev_priv)
cdclk_state.vco = 0;
cdclk_state.voltage_level = cnl_calc_voltage_level(cdclk_state.cdclk);
- cnl_set_cdclk(dev_priv, &cdclk_state, INVALID_PIPE);
+ bxt_set_cdclk(dev_priv, &cdclk_state, INVALID_PIPE);
}
/**
@@ -2655,12 +2626,12 @@ void intel_update_rawclk(struct drm_i915_private *dev_priv)
void intel_init_cdclk_hooks(struct drm_i915_private *dev_priv)
{
if (INTEL_GEN(dev_priv) >= 11) {
- dev_priv->display.set_cdclk = cnl_set_cdclk;
+ dev_priv->display.set_cdclk = bxt_set_cdclk;
dev_priv->display.modeset_calc_cdclk = icl_modeset_calc_cdclk;
dev_priv->cdclk.table = icl_cdclk_table;
dev_priv->cdclk.table_size = ARRAY_SIZE(icl_cdclk_table);
} else if (IS_CANNONLAKE(dev_priv)) {
- dev_priv->display.set_cdclk = cnl_set_cdclk;
+ dev_priv->display.set_cdclk = bxt_set_cdclk;
dev_priv->display.modeset_calc_cdclk = cnl_modeset_calc_cdclk;
dev_priv->cdclk.table = cnl_cdclk_table;
dev_priv->cdclk.table_size = ARRAY_SIZE(cnl_cdclk_table);
--
2.20.1
More information about the Intel-gfx
mailing list