[Intel-gfx] [PATCH 2/4] drm/i915: Fix CD2X pipe select masking during cdclk sanitation

[Ville Syrjala]

From: Ville Syrjälä <ville.syrjala at linux.intel.com>

We're forgetting to mask off all three pipe select bits from the
CDCLK_CTL value on icl+ which may lead to the extra bit being
left in. That will cause us to consider the current hardware
cdclk state as invalid, and we proceed to sanitize it even
though the hardware may have active pipes and whatnot.

Fix up the mask so we get rid of all three pipe select bits
and thus hopefully no longer sanitize cdclk when it's already
correctly programmed.

Cc: Matt Roper <matthew.d.roper at intel.com>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=111641
Fixes: 0c1279b58fc7 ("drm/i915: Consolidate {bxt,cnl,icl}_init_cdclk")
Signed-off-by: Ville Syrjälä <ville.syrjala at linux.intel.com>
---
 drivers/gpu/drm/i915/display/intel_cdclk.c | 42 ++++++++++++----------
 1 file changed, 23 insertions(+), 19 deletions(-)

diff --git a/drivers/gpu/drm/i915/display/intel_cdclk.c b/drivers/gpu/drm/i915/display/intel_cdclk.c
index 6b75d2a91cd9..f59a6f775177 100644
--- a/drivers/gpu/drm/i915/display/intel_cdclk.c
+++ b/drivers/gpu/drm/i915/display/intel_cdclk.c
@@ -1464,6 +1464,26 @@ static void cnl_cdclk_pll_enable(struct drm_i915_private *dev_priv, int vco)
 	dev_priv->cdclk.hw.vco = vco;
 }
 
+static u32 bxt_cdclk_cd2x_pipe(struct drm_i915_private *dev_priv, enum pipe pipe)
+{
+	if (INTEL_GEN(dev_priv) >= 12) {
+		if (pipe == INVALID_PIPE)
+			return TGL_CDCLK_CD2X_PIPE_NONE;
+		else
+			return TGL_CDCLK_CD2X_PIPE(pipe);
+	} else if (INTEL_GEN(dev_priv) >= 11) {
+		if (pipe == INVALID_PIPE)
+			return ICL_CDCLK_CD2X_PIPE_NONE;
+		else
+			return ICL_CDCLK_CD2X_PIPE(pipe);
+	} else {
+		if (pipe == INVALID_PIPE)
+			return BXT_CDCLK_CD2X_PIPE_NONE;
+		else
+			return BXT_CDCLK_CD2X_PIPE(pipe);
+	}
+}
+
 static void bxt_set_cdclk(struct drm_i915_private *dev_priv,
 			  const struct intel_cdclk_state *cdclk_state,
 			  enum pipe pipe)
@@ -1534,24 +1554,8 @@ static void bxt_set_cdclk(struct drm_i915_private *dev_priv,
 			bxt_de_pll_enable(dev_priv, vco);
 	}
 
-	val = divider | skl_cdclk_decimal(cdclk);
-
-	if (INTEL_GEN(dev_priv) >= 12) {
-		if (pipe == INVALID_PIPE)
-			val |= TGL_CDCLK_CD2X_PIPE_NONE;
-		else
-			val |= TGL_CDCLK_CD2X_PIPE(pipe);
-	} else if (INTEL_GEN(dev_priv) >= 11) {
-		if (pipe == INVALID_PIPE)
-			val |= ICL_CDCLK_CD2X_PIPE_NONE;
-		else
-			val |= ICL_CDCLK_CD2X_PIPE(pipe);
-	} else {
-		if (pipe == INVALID_PIPE)
-			val |= BXT_CDCLK_CD2X_PIPE_NONE;
-		else
-			val |= BXT_CDCLK_CD2X_PIPE(pipe);
-	}
+	val = divider | skl_cdclk_decimal(cdclk) |
+		bxt_cdclk_cd2x_pipe(dev_priv, pipe);
 
 	/*
 	 * Disable SSA Precharge when CD clock frequency < 500 MHz,
@@ -1620,7 +1624,7 @@ static void bxt_sanitize_cdclk(struct drm_i915_private *dev_priv)
 	 * dividers both synching to an active pipe, or asynchronously
 	 * (PIPE_NONE).
 	 */
-	cdctl &= ~BXT_CDCLK_CD2X_PIPE_NONE;
+	cdctl &= ~bxt_cdclk_cd2x_pipe(dev_priv, INVALID_PIPE);
 
 	/* Make sure this is a legal cdclk value for the platform */
 	cdclk = bxt_calc_cdclk(dev_priv, dev_priv->cdclk.hw.cdclk);
-- 
2.21.0