[Intel-gfx] [PATCH 1/1] drm/i915: Get the correct wakeref for reading HOTPLUG_EN et al.
Arkadiusz Hiler
arkadiusz.hiler at intel.com
Thu Sep 12 12:54:18 UTC 2019
Without it we get:
Unclaimed read from register 0x1e1110
WARNING: CPU: 2 PID: 1029 at drivers/gpu/drm/i915/intel_uncore.c:1101 __unclaimed_reg_debug+0x40/0x50 [i915]
Call Trace:
fwtable_read32+0x233/0x300 [i915]
i915_interrupt_info+0xa73/0xd60 [i915]
seq_read+0xdb/0x3c0
full_proxy_read+0x51/0x80
vfs_read+0x9e/0x160
ksys_read+0x8f/0xe0
do_syscall_64+0x55/0x1c0
entry_SYSCALL_64_after_hwframe+0x49/0xbe
Cc: Chris Wilson <chris at chris-wilson.co.uk>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=109824
Signed-off-by: Arkadiusz Hiler <arkadiusz.hiler at intel.com>
---
drivers/gpu/drm/i915/i915_debugfs.c | 4 +++-
1 file changed, 3 insertions(+), 1 deletion(-)
diff --git a/drivers/gpu/drm/i915/i915_debugfs.c b/drivers/gpu/drm/i915/i915_debugfs.c
index e5835337f022..29f3436167a2 100644
--- a/drivers/gpu/drm/i915/i915_debugfs.c
+++ b/drivers/gpu/drm/i915/i915_debugfs.c
@@ -534,6 +534,7 @@ static int i915_interrupt_info(struct seq_file *m, void *data)
gen8_display_interrupt_info(m);
} else if (IS_VALLEYVIEW(dev_priv)) {
+ intel_wakeref_t pref;
seq_printf(m, "Display IER:\t%08x\n",
I915_READ(VLV_IER));
seq_printf(m, "Display IIR:\t%08x\n",
@@ -544,7 +545,6 @@ static int i915_interrupt_info(struct seq_file *m, void *data)
I915_READ(VLV_IMR));
for_each_pipe(dev_priv, pipe) {
enum intel_display_power_domain power_domain;
- intel_wakeref_t pref;
power_domain = POWER_DOMAIN_PIPE(pipe);
pref = intel_display_power_get_if_enabled(dev_priv,
@@ -578,12 +578,14 @@ static int i915_interrupt_info(struct seq_file *m, void *data)
seq_printf(m, "PM IMR:\t\t%08x\n",
I915_READ(GEN6_PMIMR));
+ pref = intel_display_power_get(dev_priv, POWER_DOMAIN_INIT);
seq_printf(m, "Port hotplug:\t%08x\n",
I915_READ(PORT_HOTPLUG_EN));
seq_printf(m, "DPFLIPSTAT:\t%08x\n",
I915_READ(VLV_DPFLIPSTAT));
seq_printf(m, "DPINVGTT:\t%08x\n",
I915_READ(DPINVGTT));
+ intel_display_power_put(dev_priv, POWER_DOMAIN_INIT, pref);
} else if (!HAS_PCH_SPLIT(dev_priv)) {
seq_printf(m, "Interrupt enable: %08x\n",
--
2.21.0
More information about the Intel-gfx
mailing list