[Intel-gfx] [PATCH 2/6] drm/i915/display/icl: Enable TRANSCODER PORT SYNC for tiled displays across separate ports

[Maarten Lankhorst]

Op 09-09-2019 om 05:43 schreef Manasi Navare:
> In case of tiled displays where different tiles are displayed across
> different ports, we need to synchronize the transcoders involved.
> This patch implements the transcoder port sync feature for
> synchronizing one master transcoder with one or more slave
> transcoders. This is only enbaled in slave transcoder
> and the master transcoder is unaware that it is operating
> in this mode.
> This has been tested with tiled display connected to ICL.
>
> v4:
> Rebase
> v3:
> * Check of DP_MST moved to atomic_check (Maarten)
> v2:
> * Do not use RMW, just write to the register in commit (Jani N)
>
> Cc: Daniel Vetter <daniel.vetter at intel.com>
> Cc: Ville Syrjälä <ville.syrjala at linux.intel.com>
> Cc: Maarten Lankhorst <maarten.lankhorst at linux.intel.com>
> Cc: Matt Roper <matthew.d.roper at intel.com>
> Cc: Jani Nikula <jani.nikula at intel.com>
> Signed-off-by: Manasi Navare <manasi.d.navare at intel.com>
> ---
>  drivers/gpu/drm/i915/display/intel_display.c | 43 ++++++++++++++++++++
>  1 file changed, 43 insertions(+)
>
> diff --git a/drivers/gpu/drm/i915/display/intel_display.c b/drivers/gpu/drm/i915/display/intel_display.c
> index 8942c905ae66..b8f7a919b6d3 100644
> --- a/drivers/gpu/drm/i915/display/intel_display.c
> +++ b/drivers/gpu/drm/i915/display/intel_display.c
> @@ -4380,6 +4380,46 @@ static void icl_set_pipe_chicken(struct intel_crtc *crtc)
>  	I915_WRITE(PIPE_CHICKEN(pipe), tmp);
>  }
>  
> +static void icl_enable_trans_port_sync(const struct intel_crtc_state *crtc_state)
> +{
> +	struct intel_crtc *crtc = to_intel_crtc(crtc_state->base.crtc);
> +	struct drm_i915_private *dev_priv = to_i915(crtc->base.dev);
> +	u32 trans_ddi_func_ctl2_val;
> +	u8 master_select;
> +
> +	/*
> +	 * Configure the master select and enable Transcoder Port Sync for
> +	 * Slave CRTCs transcoder.
> +	 */
> +	if (crtc_state->master_transcoder == INVALID_TRANSCODER)
> +		return;
> +
> +	switch (crtc_state->master_transcoder) {
> +	case TRANSCODER_A:
> +		master_select = 1;
> +		break;
> +	case TRANSCODER_B:
> +		master_select = 2;
> +		break;
> +	case TRANSCODER_C:
> +		master_select = 3;
> +		break;
> +	case TRANSCODER_EDP:
> +	default:
> +		master_select = 0;
> +		break;
> +	}
default should use MISSING_CASE() Otherwise looks good.
> +	/* Set the master select bits for Tranascoder Port Sync */
> +	trans_ddi_func_ctl2_val = (PORT_SYNC_MODE_MASTER_SELECT(master_select) &
> +				   PORT_SYNC_MODE_MASTER_SELECT_MASK) <<
> +		PORT_SYNC_MODE_MASTER_SELECT_SHIFT;
> +	/* Enable Transcoder Port Sync */
> +	trans_ddi_func_ctl2_val |= PORT_SYNC_MODE_ENABLE;
> +
> +	I915_WRITE(TRANS_DDI_FUNC_CTL2(crtc_state->cpu_transcoder),
> +		   trans_ddi_func_ctl2_val);
> +}
> +
>  static void intel_update_pipe_config(const struct intel_crtc_state *old_crtc_state,
>  				     const struct intel_crtc_state *new_crtc_state)
>  {
> @@ -6448,6 +6488,9 @@ static void haswell_crtc_enable(struct intel_crtc_state *pipe_config,
>  	if (!transcoder_is_dsi(cpu_transcoder))
>  		intel_set_pipe_timings(pipe_config);
>  
> +	if (INTEL_GEN(dev_priv) >= 11)
> +		icl_enable_trans_port_sync(pipe_config);
> +
>  	intel_set_pipe_src_size(pipe_config);
>  
>  	if (cpu_transcoder != TRANSCODER_EDP &&