[Intel-gfx] [PATCH 07/12] drm/i915: Don't look at unrelated PIPECONF bits for interlaced readout

Mun, Gwan-gyeong gwan-gyeong.mun at intel.com
Wed Sep 18 19:02:06 UTC 2019


On Thu, 2019-07-18 at 17:50 +0300, Ville Syrjala wrote:
> From: Ville Syrjälä <ville.syrjala at linux.intel.com>
> 
> Since HSW the PIPECONF progressive vs. interlaced selection is done
> with just two bits instead of the earlier three. Let's not look at
> the
> extra bit on HSW+. Also gen2 doesn't support interlaced displays at
> all.
> 
> This is actually fine as is currently because the extra bit is mbz
> (as
> are all three bits on gen2). But just to avoid mishaps in the future
> if the bits get reused let's only look at what's properly defined.
> 
> Signed-off-by: Ville Syrjälä <ville.syrjala at linux.intel.com>
> ---
>  drivers/gpu/drm/i915/display/intel_display.c | 17 ++++++++++++++++-
>  1 file changed, 16 insertions(+), 1 deletion(-)
> 
> diff --git a/drivers/gpu/drm/i915/display/intel_display.c
> b/drivers/gpu/drm/i915/display/intel_display.c
> index e25b82d07d4f..ffdc350dc24a 100644
> --- a/drivers/gpu/drm/i915/display/intel_display.c
> +++ b/drivers/gpu/drm/i915/display/intel_display.c
> @@ -8189,6 +8189,21 @@ static void intel_set_pipe_src_size(const
> struct intel_crtc_state *crtc_state)
>  		   (crtc_state->pipe_src_h - 1));
>  }
>  
> +static bool intel_pipe_is_interlaced(struct intel_crtc_state
> *crtc_state)
> +{
> +	struct drm_i915_private *dev_priv = to_i915(crtc_state-
> >base.crtc->dev);
> +	enum transcoder cpu_transcoder = crtc_state->cpu_transcoder;
> +
> +	if (IS_GEN(dev_priv, 2))
> +		return false;
> +
> +	if (INTEL_GEN(dev_priv) >= 9 ||
> +	    IS_BROADWELL(dev_priv) || IS_HASWELL(dev_priv))
> +		return I915_READ(PIPECONF(cpu_transcoder)) &
> PIPECONF_INTERLACE_MASK_HSW;
> +	else
> +		return I915_READ(PIPECONF(cpu_transcoder)) &
> PIPECONF_INTERLACE_MASK;
> +}
> +
>  static void intel_get_pipe_timings(struct intel_crtc *crtc,
>  				   struct intel_crtc_state
> *pipe_config)
>  {
> @@ -8227,7 +8242,7 @@ static void intel_get_pipe_timings(struct
> intel_crtc *crtc,
>  	pipe_config->base.adjusted_mode.crtc_vsync_start = (tmp &
> 0xffff) + 1;
>  	pipe_config->base.adjusted_mode.crtc_vsync_end = ((tmp >> 16) &
> 0xffff) + 1;
>  
> -	if (I915_READ(PIPECONF(cpu_transcoder)) &
> PIPECONF_INTERLACE_MASK) {
> +	if (intel_pipe_is_interlaced(pipe_config)) {
>  		pipe_config->base.adjusted_mode.flags |=
> DRM_MODE_FLAG_INTERLACE;
>  		pipe_config->base.adjusted_mode.crtc_vtotal += 1;
>  		pipe_config->base.adjusted_mode.crtc_vblank_end += 1;
The changes look good to me.
Reviewed-by: Gwan-gyeong Mun <gwan-gyeong.mun at intel.com>


More information about the Intel-gfx mailing list