[Intel-gfx] [PATCH] drm/i915/dp: Fix DP MST error after unplugging TypeC cable

S, Srinivasan srinivasan.s at intel.com
Thu Sep 19 07:23:30 UTC 2019


Would the following be appropriate fix?

        if (connector || connector->base.status == connector_status_connected) {
                ret = drm_dp_update_payload_part1(&intel_dp->mst_mgr);
                if (ret) {
                        DRM_ERROR("failed to update payload %d\n", ret);
                }
        }

Regards,
-----Original Message-----
From: dri-devel <dri-devel-bounces at lists.freedesktop.org> On Behalf Of Manasi Navare
Sent: Wednesday, September 18, 2019 11:55 PM
To: Ville Syrjälä <ville.syrjala at linux.intel.com>
Cc: S, Srinivasan <srinivasan.s at intel.com>; intel-gfx at lists.freedesktop.org; dri-devel at lists.freedesktop.org
Subject: Re: [PATCH] drm/i915/dp: Fix DP MST error after unplugging TypeC cable

On Wed, Sep 18, 2019 at 09:11:36PM +0300, Ville Syrjälä wrote:
> On Wed, Sep 18, 2019 at 10:50:39AM -0700, Manasi Navare wrote:
> > On Wed, Sep 18, 2019 at 07:09:43AM +0530, srinivasan.s at intel.com wrote:
> > > From: Srinivasan S <srinivasan.s at intel.com>
> > > 
> > > This patch avoids DP MST payload error message in dmesg, as it is 
> > > trying to read the payload from the disconnected DP MST device. 
> > > After the unplug the connector status is disconnected and we 
> > > should not be looking for the payload and hence remove the error and throw the warning.
> > > 
> > > This details can be found in:
> > > https://bugs.freedesktop.org/show_bug.cgi?id=111632
> > 
> > Please add this link as Bugzilla: 
> > https://bugs.freedesktop.org/show_bug.cgi?id=111632 after the Sign 
> > off statement
> > 
> > > 
> > > Signed-off-by: Srinivasan S <srinivasan.s at intel.com>
> > > ---
> > >  drivers/gpu/drm/i915/display/intel_dp_mst.c | 7 ++++++-
> > >  1 file changed, 6 insertions(+), 1 deletion(-)
> > > 
> > > diff --git a/drivers/gpu/drm/i915/display/intel_dp_mst.c 
> > > b/drivers/gpu/drm/i915/display/intel_dp_mst.c
> > > index eeeb3f933aa4..5b2278fdf675 100644
> > > --- a/drivers/gpu/drm/i915/display/intel_dp_mst.c
> > > +++ b/drivers/gpu/drm/i915/display/intel_dp_mst.c
> > > @@ -215,7 +215,12 @@ static void intel_mst_disable_dp(struct 
> > > intel_encoder *encoder,
> > >  
> > >  	ret = drm_dp_update_payload_part1(&intel_dp->mst_mgr);
> > >  	if (ret) {
> > > -		DRM_ERROR("failed to update payload %d\n", ret);
> > > +		if (!connector ||
> > > +		    connector->base.status != connector_status_connected) {
> > > +			DRM_WARN("DP MST disconnect\n");
> > 
> > May be adding this check before calling drm_dp_update_payload_part1() is a better idea?
> > If the connector is disconnected, why update payload?
> > 
> > Jani, Ville, thoughts?
> 
> Or just convert it to a debug?

Sure that will work, but do we really want to update the payload if the connector status is disconnected.
So shouldnt checking that before calling the function be a better fix?

Manasi

> 
> > 
> > Regards
> > Manasi
> > 
> > > +		} else {
> > > +			DRM_ERROR("failed to update payload %d\n", ret);
> > > +		}
> > >  	}
> > >  	if (old_crtc_state->has_audio)
> > >  		intel_audio_codec_disable(encoder,
> > > --
> > > 2.7.4
> > > 
> 
> --
> Ville Syrjälä
> Intel
> _______________________________________________
> dri-devel mailing list
> dri-devel at lists.freedesktop.org
> https://lists.freedesktop.org/mailman/listinfo/dri-devel
_______________________________________________
dri-devel mailing list
dri-devel at lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel


More information about the Intel-gfx mailing list