[Intel-gfx] [PATCH v2 05/13] drm/i915/tgl: Add initial dkl pll support

Lucas De Marchi lucas.de.marchi at gmail.com
Thu Sep 19 19:05:00 UTC 2019


On Wed, Sep 18, 2019 at 5:07 PM José Roberto de Souza
<jose.souza at intel.com> wrote:
>
> From: Lucas De Marchi <lucas.demarchi at intel.com>
>
> The disable function can be the same as for MG phy since the same
> registers are used. The others are different as registers changed,
> also adding a empty dkl_pll_write() to be implemented later.
>
> v2:
> Setting the right HIP_INDEX_REG bits (José)

Ack on the change since I can't r-b.

Lucas De Marchi

>
> Signed-off-by: José Roberto de Souza <jose.souza at intel.com>
> Signed-off-by: Lucas De Marchi <lucas.demarchi at intel.com>
> ---
>  drivers/gpu/drm/i915/display/intel_dpll_mgr.c | 115 +++++++++++++++++-
>  1 file changed, 114 insertions(+), 1 deletion(-)
>
> diff --git a/drivers/gpu/drm/i915/display/intel_dpll_mgr.c b/drivers/gpu/drm/i915/display/intel_dpll_mgr.c
> index 84e734d44828..46dde614bfb5 100644
> --- a/drivers/gpu/drm/i915/display/intel_dpll_mgr.c
> +++ b/drivers/gpu/drm/i915/display/intel_dpll_mgr.c
> @@ -3086,6 +3086,76 @@ static bool mg_pll_get_hw_state(struct drm_i915_private *dev_priv,
>         return ret;
>  }
>
> +static bool dkl_pll_get_hw_state(struct drm_i915_private *dev_priv,
> +                                struct intel_shared_dpll *pll,
> +                                struct intel_dpll_hw_state *hw_state)
> +{
> +       const enum intel_dpll_id id = pll->info->id;
> +       enum tc_port tc_port = icl_pll_id_to_tc_port(id);
> +       intel_wakeref_t wakeref;
> +       bool ret = false;
> +       u32 val;
> +
> +       wakeref = intel_display_power_get_if_enabled(dev_priv,
> +                                                    POWER_DOMAIN_DISPLAY_CORE);
> +       if (!wakeref)
> +               return false;
> +
> +       val = I915_READ(MG_PLL_ENABLE(tc_port));
> +       if (!(val & PLL_ENABLE))
> +               goto out;
> +
> +       /*
> +        * All registers read here have the same HIP_INDEX_REG even though
> +        * they are on different building blocks
> +        */
> +       I915_WRITE(HIP_INDEX_REG(tc_port), HIP_INDEX_VAL(tc_port, 0x2));
> +
> +       hw_state->mg_refclkin_ctl = I915_READ(DKL_REFCLKIN_CTL(tc_port));
> +       hw_state->mg_refclkin_ctl &= MG_REFCLKIN_CTL_OD_2_MUX_MASK;
> +
> +       hw_state->mg_clktop2_hsclkctl =
> +               I915_READ(DKL_CLKTOP2_HSCLKCTL(tc_port));
> +       hw_state->mg_clktop2_hsclkctl &=
> +               MG_CLKTOP2_HSCLKCTL_TLINEDRV_CLKSEL_MASK |
> +               MG_CLKTOP2_HSCLKCTL_CORE_INPUTSEL_MASK |
> +               MG_CLKTOP2_HSCLKCTL_HSDIV_RATIO_MASK |
> +               MG_CLKTOP2_HSCLKCTL_DSDIV_RATIO_MASK;
> +
> +       hw_state->mg_clktop2_coreclkctl1 =
> +               I915_READ(DKL_CLKTOP2_CORECLKCTL1(tc_port));
> +       hw_state->mg_clktop2_coreclkctl1 &=
> +               MG_CLKTOP2_CORECLKCTL1_A_DIVRATIO_MASK;
> +
> +       hw_state->mg_pll_div0 = I915_READ(DKL_PLL_DIV0(tc_port));
> +       hw_state->mg_pll_div0 &= (DKL_PLL_DIV0_INTEG_COEFF_MASK |
> +                                 DKL_PLL_DIV0_PROP_COEFF_MASK |
> +                                 DKL_PLL_DIV0_FBPREDIV_MASK |
> +                                 DKL_PLL_DIV0_FBDIV_INT_MASK);
> +
> +       hw_state->mg_pll_div1 = I915_READ(DKL_PLL_DIV1(tc_port));
> +       hw_state->mg_pll_div1 &= (DKL_PLL_DIV1_IREF_TRIM_MASK |
> +                                 DKL_PLL_DIV1_TDC_TARGET_CNT_MASK);
> +
> +       hw_state->mg_pll_ssc = I915_READ(DKL_PLL_SSC(tc_port));
> +       hw_state->mg_pll_ssc &= (DKL_PLL_SSC_IREF_NDIV_RATIO_MASK |
> +                                DKL_PLL_SSC_STEP_LEN_MASK |
> +                                DKL_PLL_SSC_STEP_NUM_MASK |
> +                                DKL_PLL_SSC_EN);
> +
> +       hw_state->mg_pll_bias = I915_READ(DKL_PLL_BIAS(tc_port));
> +       hw_state->mg_pll_bias &= (DKL_PLL_BIAS_FRAC_EN_H |
> +                                 DKL_PLL_BIAS_FBDIV_FRAC_MASK);
> +
> +       hw_state->mg_pll_tdc_coldst_bias =
> +               I915_READ(DKL_PLL_TDC_COLDST_BIAS(tc_port));
> +
> +       ret = true;
> +out:
> +       intel_display_power_put(dev_priv, POWER_DOMAIN_DISPLAY_CORE, wakeref);
> +       return ret;
> +}
> +
>  static bool icl_pll_get_hw_state(struct drm_i915_private *dev_priv,
>                                  struct intel_shared_dpll *pll,
>                                  struct intel_dpll_hw_state *hw_state,
> @@ -3220,6 +3290,12 @@ static void icl_mg_pll_write(struct drm_i915_private *dev_priv,
>         POSTING_READ(MG_PLL_TDC_COLDST_BIAS(tc_port));
>  }
>
> +static void dkl_pll_write(struct drm_i915_private *dev_priv,
> +                         struct intel_shared_dpll *pll)
> +{
> +       /* TODO */
> +}
> +
>  static void icl_pll_power_enable(struct drm_i915_private *dev_priv,
>                                  struct intel_shared_dpll *pll,
>                                  i915_reg_t enable_reg)
> @@ -3325,6 +3401,32 @@ static void mg_pll_enable(struct drm_i915_private *dev_priv,
>         /* DVFS post sequence would be here. See the comment above. */
>  }
>
> +static void dkl_pll_enable(struct drm_i915_private *dev_priv,
> +                          struct intel_shared_dpll *pll)
> +{
> +       /*
> +        * From spec: MG register instances are being used for TypeC in general.
> +        * The same MG register instances should be programmed for Dekel PLLs
> +        * as well.
> +        */
> +       i915_reg_t enable_reg =
> +               MG_PLL_ENABLE(icl_pll_id_to_tc_port(pll->info->id));
> +
> +       icl_pll_power_enable(dev_priv, pll, enable_reg);
> +
> +       dkl_pll_write(dev_priv, pll);
> +
> +       /*
> +        * DVFS pre sequence would be here, but in our driver the cdclk code
> +        * paths should already be setting the appropriate voltage, hence we do
> +        * nothing here.
> +        */
> +
> +       icl_pll_enable(dev_priv, pll, enable_reg);
> +
> +       /* DVFS post sequence would be here. See the comment above. */
> +}
> +
>  static void icl_pll_disable(struct drm_i915_private *dev_priv,
>                             struct intel_shared_dpll *pll,
>                             i915_reg_t enable_reg)
> @@ -3467,11 +3569,22 @@ static const struct intel_dpll_mgr ehl_pll_mgr = {
>         .dump_hw_state = icl_dump_hw_state,
>  };
>
> +static const struct intel_shared_dpll_funcs dkl_pll_funcs = {
> +       .enable = dkl_pll_enable,
> +       .disable = mg_pll_disable,
> +       .get_hw_state = dkl_pll_get_hw_state,
> +};
> +
>  static const struct dpll_info tgl_plls[] = {
>         { "DPLL 0", &combo_pll_funcs, DPLL_ID_ICL_DPLL0,  0 },
>         { "DPLL 1", &combo_pll_funcs, DPLL_ID_ICL_DPLL1,  0 },
>         { "TBT PLL",  &tbt_pll_funcs, DPLL_ID_ICL_TBTPLL, 0 },
> -       /* TODO: Add typeC plls */
> +       { "TC PLL 1", &dkl_pll_funcs, DPLL_ID_ICL_MGPLL1, 0 },
> +       { "TC PLL 2", &dkl_pll_funcs, DPLL_ID_ICL_MGPLL2, 0 },
> +       { "TC PLL 3", &dkl_pll_funcs, DPLL_ID_ICL_MGPLL3, 0 },
> +       { "TC PLL 4", &dkl_pll_funcs, DPLL_ID_ICL_MGPLL4, 0 },
> +       { "TC PLL 5", &dkl_pll_funcs, DPLL_ID_TGL_MGPLL5, 0 },
> +       { "TC PLL 6", &dkl_pll_funcs, DPLL_ID_TGL_MGPLL6, 0 },
>         { },
>  };
>
> --
> 2.23.0
>
> _______________________________________________
> Intel-gfx mailing list
> Intel-gfx at lists.freedesktop.org
> https://lists.freedesktop.org/mailman/listinfo/intel-gfx



-- 
Lucas De Marchi


More information about the Intel-gfx mailing list