[Intel-gfx] [PATCH 10/23] drm/i915/dp: Allow big joiner modes in intel_dp_mode_valid()

Maarten Lankhorst maarten.lankhorst at linux.intel.com
Fri Sep 20 11:42:22 UTC 2019


Small changes to intel_dp_mode_valid(), allow listing modes that
can only be supported in the bigjoiner configuration, which is
not supported yet.

Also unexport a few functions only used internally in intel_dp.c

Signed-off-by: Maarten Lankhorst <maarten.lankhorst at linux.intel.com>
---
 drivers/gpu/drm/i915/display/intel_dp.c | 98 +++++++++++++++++++------
 1 file changed, 75 insertions(+), 23 deletions(-)

diff --git a/drivers/gpu/drm/i915/display/intel_dp.c b/drivers/gpu/drm/i915/display/intel_dp.c
index 2fceb71f7f70..046e1662d1e3 100644
--- a/drivers/gpu/drm/i915/display/intel_dp.c
+++ b/drivers/gpu/drm/i915/display/intel_dp.c
@@ -247,7 +247,7 @@ intel_dp_max_data_rate(int max_link_clock, int max_lanes)
 }
 
 static int
-intel_dp_downstream_max_dotclock(struct intel_dp *intel_dp)
+intel_dp_downstream_max_dotclock(struct intel_dp *intel_dp, bool allow_bigjoiner)
 {
 	struct intel_digital_port *intel_dig_port = dp_to_dig_port(intel_dp);
 	struct intel_encoder *encoder = &intel_dig_port->base;
@@ -257,6 +257,9 @@ intel_dp_downstream_max_dotclock(struct intel_dp *intel_dp)
 
 	int type = intel_dp->downstream_ports[0] & DP_DS_PORT_TYPE_MASK;
 
+	if (allow_bigjoiner && INTEL_GEN(dev_priv) >= 11)
+		max_dotclk *= 2;
+
 	if (type != DP_DS_PORT_TYPE_VGA)
 		return max_dotclk;
 
@@ -505,8 +508,10 @@ u32 intel_dp_fec_to_mode_clock(u32 fec_clock)
 		       1000000U);
 }
 
-static u16 intel_dp_dsc_get_output_bpp(u32 link_clock, u32 lane_count,
-				       u32 mode_clock, u32 mode_hdisplay)
+static u16 intel_dp_dsc_get_output_bpp(struct drm_i915_private *dev_priv,
+				       u32 link_clock, u32 lane_count,
+				       u32 mode_clock, u32 mode_hdisplay,
+				       bool bigjoiner)
 {
 	u32 bits_per_pixel, max_bpp_small_joiner_ram;
 	int i;
@@ -523,6 +528,10 @@ static u16 intel_dp_dsc_get_output_bpp(u32 link_clock, u32 lane_count,
 
 	/* Small Joiner Check: output bpp <= joiner RAM (bits) / Horiz. width */
 	max_bpp_small_joiner_ram = DP_DSC_MAX_SMALL_JOINER_RAM_BUFFER / mode_hdisplay;
+
+	if (bigjoiner)
+		max_bpp_small_joiner_ram *= 2;
+
 	DRM_DEBUG_KMS("Max small joiner bpp: %u\n", max_bpp_small_joiner_ram);
 
 	/*
@@ -531,6 +540,15 @@ static u16 intel_dp_dsc_get_output_bpp(u32 link_clock, u32 lane_count,
 	 */
 	bits_per_pixel = min(bits_per_pixel, max_bpp_small_joiner_ram);
 
+	if (bigjoiner) {
+		u32 max_bpp_bigjoiner =
+			dev_priv->max_cdclk_freq * 48 /
+			intel_dp_mode_to_fec_clock(mode_clock);
+
+		DRM_DEBUG_KMS("Max big joiner bpp: %u\n", max_bpp_bigjoiner);
+		bits_per_pixel = min(bits_per_pixel, max_bpp_bigjoiner);
+	}
+
 	/* Error out if the max bpp is less than smallest allowed valid bpp */
 	if (bits_per_pixel < valid_dsc_bpp[0]) {
 		DRM_DEBUG_KMS("Unsupported BPP %u, min %u\n",
@@ -553,7 +571,8 @@ static u16 intel_dp_dsc_get_output_bpp(u32 link_clock, u32 lane_count,
 }
 
 static u8 intel_dp_dsc_get_slice_count(struct intel_dp *intel_dp,
-				       int mode_clock, int mode_hdisplay)
+				       int mode_clock, int mode_hdisplay,
+				       bool bigjoiner)
 {
 	u8 min_slice_count, i;
 	int max_slice_width;
@@ -578,12 +597,20 @@ static u8 intel_dp_dsc_get_slice_count(struct intel_dp *intel_dp,
 
 	/* Find the closest match to the valid slice count values */
 	for (i = 0; i < ARRAY_SIZE(valid_dsc_slicecount); i++) {
-		if (valid_dsc_slicecount[i] >
-		    drm_dp_dsc_sink_max_slice_count(intel_dp->dsc_dpcd,
-						    false))
+		u8 test_slice_count = bigjoiner ?
+			2 * valid_dsc_slicecount[i] :
+			valid_dsc_slicecount[i];
+
+		if (test_slice_count >
+		    drm_dp_dsc_sink_max_slice_count(intel_dp->dsc_dpcd, false))
 			break;
-		if (min_slice_count  <= valid_dsc_slicecount[i])
-			return valid_dsc_slicecount[i];
+
+		/* big joiner needs small joiner to be enabled */
+		if (bigjoiner && test_slice_count < 4)
+			continue;
+
+		if (min_slice_count <= test_slice_count)
+			return test_slice_count;
 	}
 
 	DRM_DEBUG_KMS("Unsupported Slice Count %d\n", min_slice_count);
@@ -603,11 +630,15 @@ intel_dp_mode_valid(struct drm_connector *connector,
 	int max_dotclk;
 	u16 dsc_max_output_bpp = 0;
 	u8 dsc_slice_count = 0;
+	bool dsc = false, bigjoiner = false;
 
 	if (mode->flags & DRM_MODE_FLAG_DBLSCAN)
 		return MODE_NO_DBLESCAN;
 
-	max_dotclk = intel_dp_downstream_max_dotclock(intel_dp);
+	if (mode->flags & DRM_MODE_FLAG_DBLCLK)
+		return MODE_H_ILLEGAL;
+
+	max_dotclk = intel_dp_downstream_max_dotclock(intel_dp, false);
 
 	if (intel_dp_is_edp(intel_dp) && fixed_mode) {
 		if (mode->hdisplay > fixed_mode->hdisplay)
@@ -619,6 +650,18 @@ intel_dp_mode_valid(struct drm_connector *connector,
 		target_clock = fixed_mode->clock;
 	}
 
+	if (mode->clock < 10000)
+		return MODE_CLOCK_LOW;
+
+	if (target_clock > max_dotclk) {
+		max_dotclk = intel_dp_downstream_max_dotclock(intel_dp, true);
+
+		if (target_clock > max_dotclk)
+			return MODE_CLOCK_HIGH;
+
+		bigjoiner = true;
+	}
+
 	max_link_clock = intel_dp_max_link_rate(intel_dp);
 	max_lanes = intel_dp_max_lane_count(intel_dp);
 
@@ -639,26 +682,32 @@ intel_dp_mode_valid(struct drm_connector *connector,
 								true);
 		} else if (drm_dp_sink_supports_fec(intel_dp->fec_capable)) {
 			dsc_max_output_bpp =
-				intel_dp_dsc_get_output_bpp(max_link_clock,
+				intel_dp_dsc_get_output_bpp(dev_priv,
+							    max_link_clock,
 							    max_lanes,
 							    target_clock,
-							    mode->hdisplay) >> 4;
+							    mode->hdisplay,
+							    bigjoiner) >> 4;
 			dsc_slice_count =
 				intel_dp_dsc_get_slice_count(intel_dp,
 							     target_clock,
-							     mode->hdisplay);
+							     mode->hdisplay,
+							     bigjoiner);
 		}
+
+		dsc = dsc_max_output_bpp && dsc_slice_count;
 	}
 
-	if ((mode_rate > max_rate && !(dsc_max_output_bpp && dsc_slice_count)) ||
-	    target_clock > max_dotclk)
+	/* big joiner configuration needs DSC */
+	if (bigjoiner && !dsc) {
+		DRM_DEBUG_KMS("Link clock needs bigjoiner, but DSC or FEC not available\n");
 		return MODE_CLOCK_HIGH;
+	}
 
-	if (mode->clock < 10000)
-		return MODE_CLOCK_LOW;
-
-	if (mode->flags & DRM_MODE_FLAG_DBLCLK)
-		return MODE_H_ILLEGAL;
+	if (mode_rate > max_rate && !dsc) {
+		DRM_DEBUG_KMS("Cannot drive without DSC\n");
+		return MODE_CLOCK_HIGH;
+	}
 
 	return intel_mode_valid_max_plane_size(dev_priv, mode);
 }
@@ -2068,14 +2117,17 @@ static int intel_dp_dsc_compute_config(struct intel_dp *intel_dp,
 		u8 dsc_dp_slice_count;
 
 		dsc_max_output_bpp =
-			intel_dp_dsc_get_output_bpp(pipe_config->port_clock,
+			intel_dp_dsc_get_output_bpp(dev_priv,
+						    pipe_config->port_clock,
 						    pipe_config->lane_count,
 						    adjusted_mode->crtc_clock,
-						    adjusted_mode->crtc_hdisplay);
+						    adjusted_mode->crtc_hdisplay,
+						    false);
 		dsc_dp_slice_count =
 			intel_dp_dsc_get_slice_count(intel_dp,
 						     adjusted_mode->crtc_clock,
-						     adjusted_mode->crtc_hdisplay);
+						     adjusted_mode->crtc_hdisplay,
+						     false);
 		if (!dsc_max_output_bpp || !dsc_dp_slice_count) {
 			DRM_DEBUG_KMS("Compressed BPP/Slice Count not supported\n");
 			return -EINVAL;
-- 
2.20.1



More information about the Intel-gfx mailing list