[Intel-gfx] [PATCH v3 6/9] drm/i915/tgl: Add dkl phy pll calculations

[José Roberto de Souza]

Extending ICL mg calculations to also support dkl calculations.

v3:
Fixing iref_trim calculation for 38400 refclock

BSpec: 49204

Signed-off-by: Vandita Kulkarni <vandita.kulkarni at intel.com>
Signed-off-by: José Roberto de Souza <jose.souza at intel.com>
---
 drivers/gpu/drm/i915/display/intel_ddi.c      | 29 +++++++++---
 drivers/gpu/drm/i915/display/intel_dpll_mgr.c | 45 ++++++++++++++++---
 2 files changed, 62 insertions(+), 12 deletions(-)

diff --git a/drivers/gpu/drm/i915/display/intel_ddi.c b/drivers/gpu/drm/i915/display/intel_ddi.c
index 1ab3e0c4c0a1..938639675529 100644
--- a/drivers/gpu/drm/i915/display/intel_ddi.c
+++ b/drivers/gpu/drm/i915/display/intel_ddi.c
@@ -1440,11 +1440,30 @@ static int icl_calc_mg_pll_link(struct drm_i915_private *dev_priv,
 
 	ref_clock = dev_priv->cdclk.hw.ref;
 
-	m1 = pll_state->mg_pll_div1 & MG_PLL_DIV1_FBPREDIV_MASK;
-	m2_int = pll_state->mg_pll_div0 & MG_PLL_DIV0_FBDIV_INT_MASK;
-	m2_frac = (pll_state->mg_pll_div0 & MG_PLL_DIV0_FRACNEN_H) ?
-		(pll_state->mg_pll_div0 & MG_PLL_DIV0_FBDIV_FRAC_MASK) >>
-		MG_PLL_DIV0_FBDIV_FRAC_SHIFT : 0;
+	if (INTEL_GEN(dev_priv) >= 12) {
+		m1 = pll_state->mg_pll_div0 & DKL_PLL_DIV0_FBPREDIV_MASK;
+		m1 = m1 >> DKL_PLL_DIV0_FBPREDIV_SHIFT;
+		m2_int = pll_state->mg_pll_div0 & DKL_PLL_DIV0_FBDIV_INT_MASK;
+
+		if (pll_state->mg_pll_bias & DKL_PLL_BIAS_FRAC_EN_H) {
+			m2_frac = pll_state->mg_pll_bias &
+				  DKL_PLL_BIAS_FBDIV_FRAC_MASK;
+			m2_frac = m2_frac >> DKL_PLL_BIAS_FBDIV_SHIFT;
+		} else {
+			m2_frac = 0;
+		}
+	} else {
+		m1 = pll_state->mg_pll_div1 & MG_PLL_DIV1_FBPREDIV_MASK;
+		m2_int = pll_state->mg_pll_div0 & MG_PLL_DIV0_FBDIV_INT_MASK;
+
+		if (pll_state->mg_pll_div0 & MG_PLL_DIV0_FRACNEN_H) {
+			m2_frac = pll_state->mg_pll_div0 &
+				  MG_PLL_DIV0_FBDIV_FRAC_MASK;
+			m2_frac = m2_frac >> MG_PLL_DIV0_FBDIV_FRAC_SHIFT;
+		} else {
+			m2_frac = 0;
+		}
+	}
 
 	switch (pll_state->mg_clktop2_hsclkctl &
 		MG_CLKTOP2_HSCLKCTL_HSDIV_RATIO_MASK) {
diff --git a/drivers/gpu/drm/i915/display/intel_dpll_mgr.c b/drivers/gpu/drm/i915/display/intel_dpll_mgr.c
index 9bae6f2d0f36..496df4095a21 100644
--- a/drivers/gpu/drm/i915/display/intel_dpll_mgr.c
+++ b/drivers/gpu/drm/i915/display/intel_dpll_mgr.c
@@ -2607,7 +2607,8 @@ enum intel_dpll_id icl_tc_port_to_pll_id(enum tc_port tc_port)
 
 static bool icl_mg_pll_find_divisors(int clock_khz, bool is_dp, bool use_ssc,
 				     u32 *target_dco_khz,
-				     struct intel_dpll_hw_state *state)
+				     struct intel_dpll_hw_state *state,
+				     bool is_dkl)
 {
 	u32 dco_min_freq, dco_max_freq;
 	int div1_vals[] = {7, 5, 3, 2};
@@ -2629,8 +2630,13 @@ static bool icl_mg_pll_find_divisors(int clock_khz, bool is_dp, bool use_ssc,
 				continue;
 
 			if (div2 >= 2) {
-				a_divratio = is_dp ? 10 : 5;
-				tlinedrv = 2;
+				if (is_dkl) {
+					a_divratio = 5;
+					tlinedrv = 1;
+				} else {
+					a_divratio = is_dp ? 10 : 5;
+					tlinedrv = 2;
+				}
 			} else {
 				a_divratio = 5;
 				tlinedrv = 0;
@@ -2693,11 +2699,12 @@ static bool icl_calc_mg_pll_state(struct intel_crtc_state *crtc_state,
 	u64 tmp;
 	bool use_ssc = false;
 	bool is_dp = !intel_crtc_has_type(crtc_state, INTEL_OUTPUT_HDMI);
+	bool is_dkl = INTEL_GEN(dev_priv) >= 12;
 
 	memset(pll_state, 0, sizeof(*pll_state));
 
 	if (!icl_mg_pll_find_divisors(clock, is_dp, use_ssc, &dco_khz,
-				      pll_state)) {
+				      pll_state, is_dkl)) {
 		DRM_DEBUG_KMS("Failed to find divisors for clock %d\n", clock);
 		return false;
 	}
@@ -2705,8 +2712,11 @@ static bool icl_calc_mg_pll_state(struct intel_crtc_state *crtc_state,
 	m1div = 2;
 	m2div_int = dco_khz / (refclk_khz * m1div);
 	if (m2div_int > 255) {
-		m1div = 4;
-		m2div_int = dco_khz / (refclk_khz * m1div);
+		if (!is_dkl) {
+			m1div = 4;
+			m2div_int = dco_khz / (refclk_khz * m1div);
+		}
+
 		if (m2div_int > 255) {
 			DRM_DEBUG_KMS("Failed to find mdiv for clock %d\n",
 				      clock);
@@ -2787,7 +2797,28 @@ static bool icl_calc_mg_pll_state(struct intel_crtc_state *crtc_state,
 	ssc_steplog = 4;
 
 	/* write pll_state calculations */
-	{
+	if (is_dkl) {
+		pll_state->mg_pll_div0 = DKL_PLL_DIV0_INTEG_COEFF(int_coeff) |
+					 DKL_PLL_DIV0_PROP_COEFF(prop_coeff) |
+					 DKL_PLL_DIV0_FBPREDIV(m1div) |
+					 DKL_PLL_DIV0_FBDIV_INT(m2div_int);
+
+		pll_state->mg_pll_div1 = DKL_PLL_DIV1_IREF_TRIM(iref_trim) |
+					 DKL_PLL_DIV1_TDC_TARGET_CNT(tdc_targetcnt);
+
+		pll_state->mg_pll_ssc = DKL_PLL_SSC_IREF_NDIV_RATIO(iref_ndiv) |
+					DKL_PLL_SSC_STEP_LEN(ssc_steplen) |
+					DKL_PLL_SSC_STEP_NUM(ssc_steplog) |
+					(use_ssc ? DKL_PLL_SSC_EN : 0);
+
+		pll_state->mg_pll_bias = (m2div_frac ? DKL_PLL_BIAS_FRAC_EN_H : 0) |
+					  DKL_PLL_BIAS_FBDIV_FRAC(m2div_frac);
+
+		pll_state->mg_pll_tdc_coldst_bias =
+				DKL_PLL_TDC_SSC_STEP_SIZE(ssc_stepsize) |
+				DKL_PLL_TDC_FEED_FWD_GAIN(feedfwgain);
+
+	} else {
 		pll_state->mg_pll_div0 =
 			(m2div_rem > 0 ? MG_PLL_DIV0_FRACNEN_H : 0) |
 			MG_PLL_DIV0_FBDIV_FRAC(m2div_frac) |
-- 
2.23.0