[Intel-gfx] [PATCH 16/23] drm/i915: Program planes in bigjoiner mode.

[Ville Syrjälä]

On Thu, Sep 26, 2019 at 05:50:05PM +0200, Maarten Lankhorst wrote:
> Op 26-09-2019 om 15:06 schreef Ville Syrjälä:
> > On Fri, Sep 20, 2019 at 01:42:28PM +0200, Maarten Lankhorst wrote:
> >> Now that we can program planes from the update_slave callback, and
> >> we have done all fb pinning correctly, it's time to program those
> >> planes as well.
> >>
> >> We use the update_slave callback as it allows us to use the
> >> separate states correctly.
> >>
> >> Signed-off-by: Maarten Lankhorst <maarten.lankhorst at linux.intel.com>
> >> ---
> >>  .../gpu/drm/i915/display/intel_atomic_plane.c | 53 +++++++++++++++++++
> >>  .../gpu/drm/i915/display/intel_atomic_plane.h |  2 +
> >>  drivers/gpu/drm/i915/display/intel_display.c  |  4 +-
> >>  3 files changed, 57 insertions(+), 2 deletions(-)
> >>
> >> diff --git a/drivers/gpu/drm/i915/display/intel_atomic_plane.c b/drivers/gpu/drm/i915/display/intel_atomic_plane.c
> >> index cc088676f0a2..5db091e4ad6a 100644
> >> --- a/drivers/gpu/drm/i915/display/intel_atomic_plane.c
> >> +++ b/drivers/gpu/drm/i915/display/intel_atomic_plane.c
> >> @@ -366,6 +366,59 @@ void skl_update_planes_on_crtc(struct intel_atomic_state *state,
> >>  	}
> >>  }
> >>  
> >> +void icl_update_bigjoiner_planes_on_crtc(struct intel_atomic_state *state,
> >> +					 struct intel_crtc *crtc)
> > This plane stuff is where things go very much off the rails IMO.
> > Planes should not have to know anything about bigjoiner. They should
> > just have their appropriate hw state and blindly bash it into the
> > hardware.
> 
> We already need this for planar slave/master, what's the issue exactly?

That already is too fragile. I don't want this spreading all over
the driver and coupling everything to the bigjoiner logic.

Here's a crude idea how I think we might avoid this:
git://github.com/vsyrjala/linux.git uapi_hw_state_split

But I didn't dare boot it yet...

> 
> We're using master_plane_state for all plane properties (fb/rotation/props) and plane_state for writing all state.
> 
> >> +{
> >> +	struct intel_crtc_state *old_crtc_state =
> >> +		intel_atomic_get_old_crtc_state(state, crtc);
> >> +	struct intel_crtc_state *new_crtc_state =
> >> +		intel_atomic_get_new_crtc_state(state, crtc);
> >> +	struct skl_ddb_entry entries_y[I915_MAX_PLANES];
> >> +	struct skl_ddb_entry entries_uv[I915_MAX_PLANES];
> >> +	u32 update_mask = new_crtc_state->update_planes;
> >> +	struct intel_plane *plane;
> >> +
> >> +	memcpy(entries_y, old_crtc_state->wm.skl.plane_ddb_y,
> >> +	       sizeof(old_crtc_state->wm.skl.plane_ddb_y));
> >> +	memcpy(entries_uv, old_crtc_state->wm.skl.plane_ddb_uv,
> >> +	       sizeof(old_crtc_state->wm.skl.plane_ddb_uv));
> >> +
> >> +	while ((plane = skl_next_plane_to_commit(state, crtc,
> >> +						 entries_y, entries_uv,
> >> +						 &update_mask))) {
> >> +		struct intel_plane_state *new_plane_state =
> >> +			intel_atomic_get_new_plane_state(state, plane);
> >> +		const struct intel_plane_state *master_plane_state;
> >> +
> >> +		if (new_plane_state->base.visible) {
> >> +			master_plane_state =
> >> +				intel_atomic_get_new_plane_state(state, new_plane_state->bigjoiner_plane);
> >> +
> >> +			intel_update_slave(plane, new_crtc_state,
> >> +					   master_plane_state, new_plane_state);
> >> +		} else if (new_plane_state->slave) {
> >> +			/*
> >> +			 * bigjoiner slave + planar slave.
> >> +			 * The correct sequence is to get from the planar slave to planar master,
> >> +			 * then to the master plane state for the master_plane_state.
> >> +			 */
> >> +
> >> +			struct intel_plane *linked = new_plane_state->linked_plane;
> >> +			const struct intel_plane_state *uv_plane_state =
> >> +				intel_atomic_get_new_plane_state(state, linked);
> >> +
> >> +			linked = uv_plane_state->bigjoiner_plane;
> >> +			master_plane_state =
> >> +				intel_atomic_get_new_plane_state(state, linked);
> >> +
> >> +			intel_update_slave(plane, new_crtc_state,
> >> +					   master_plane_state, new_plane_state);
> >> +		} else {
> >> +			intel_disable_plane(plane, new_crtc_state);
> >> +		}
> >> +	}
> >> +}
> >> +
> >>  void i9xx_update_planes_on_crtc(struct intel_atomic_state *state,
> >>  				struct intel_crtc *crtc)
> >>  {
> >> diff --git a/drivers/gpu/drm/i915/display/intel_atomic_plane.h b/drivers/gpu/drm/i915/display/intel_atomic_plane.h
> >> index 901a50e6e2d3..1cffda2b50b5 100644
> >> --- a/drivers/gpu/drm/i915/display/intel_atomic_plane.h
> >> +++ b/drivers/gpu/drm/i915/display/intel_atomic_plane.h
> >> @@ -30,6 +30,8 @@ void intel_plane_free(struct intel_plane *plane);
> >>  struct drm_plane_state *intel_plane_duplicate_state(struct drm_plane *plane);
> >>  void intel_plane_destroy_state(struct drm_plane *plane,
> >>  			       struct drm_plane_state *state);
> >> +void icl_update_bigjoiner_planes_on_crtc(struct intel_atomic_state *state,
> >> +					 struct intel_crtc *crtc);
> >>  void skl_update_planes_on_crtc(struct intel_atomic_state *state,
> >>  			       struct intel_crtc *crtc);
> >>  void i9xx_update_planes_on_crtc(struct intel_atomic_state *state,
> >> diff --git a/drivers/gpu/drm/i915/display/intel_display.c b/drivers/gpu/drm/i915/display/intel_display.c
> >> index 06ceac4f1436..acb3c5974e99 100644
> >> --- a/drivers/gpu/drm/i915/display/intel_display.c
> >> +++ b/drivers/gpu/drm/i915/display/intel_display.c
> >> @@ -14223,8 +14223,8 @@ static void intel_update_crtc(struct intel_crtc *crtc,
> >>  
> >>  	commit_pipe_config(state, old_crtc_state, new_crtc_state);
> >>  
> >> -	if (new_crtc_state->bigjoiner)
> >> -		{/* Not supported yet */}
> >> +	if (new_crtc_state->bigjoiner_slave)
> >> +		icl_update_bigjoiner_planes_on_crtc(state, crtc);
> >>  	else if (INTEL_GEN(dev_priv) >= 9)
> >>  		skl_update_planes_on_crtc(state, crtc);
> >>  	else
> >> -- 
> >> 2.20.1
> >>
> >> _______________________________________________
> >> Intel-gfx mailing list
> >> Intel-gfx at lists.freedesktop.org
> >> https://lists.freedesktop.org/mailman/listinfo/intel-gfx
> 

-- 
Ville Syrjälä
Intel