[Intel-gfx] [v8, 2/4] drm/panel: set display info in panel attach

[dbasehore .]

On Sat, Sep 28, 2019 at 10:23 PM james qian wang (Arm Technology
China) <james.qian.wang at arm.com> wrote:
>
> On Wed, Sep 25, 2019 at 03:58:31PM -0700, Derek Basehore wrote:
> > Devicetree systems can set panel orientation via a panel binding, but
> > there's no way, as is, to propagate this setting to the connector,
> > where the property need to be added.
> > To address this, this patch sets orientation, as well as other fixed
> > values for the panel, in the drm_panel_attach function. These values
> > are stored from probe in the drm_panel struct.
> >
> > Signed-off-by: Derek Basehore <dbasehore at chromium.org>
> > Reviewed-by: Sam Ravnborg <sam at ravnborg.org>
> > ---
> >  drivers/gpu/drm/drm_panel.c | 28 +++++++++++++++++++++
> >  include/drm/drm_panel.h     | 50 +++++++++++++++++++++++++++++++++++++
> >  2 files changed, 78 insertions(+)
> >
> > diff --git a/drivers/gpu/drm/drm_panel.c b/drivers/gpu/drm/drm_panel.c
> > index 0909b53b74e6..1cd2b56c9fe6 100644
> > --- a/drivers/gpu/drm/drm_panel.c
> > +++ b/drivers/gpu/drm/drm_panel.c
> > @@ -104,11 +104,23 @@ EXPORT_SYMBOL(drm_panel_remove);
> >   */
> >  int drm_panel_attach(struct drm_panel *panel, struct drm_connector *connector)
> >  {
> > +     struct drm_display_info *info;
> > +
> >       if (panel->connector)
> >               return -EBUSY;
> >
> >       panel->connector = connector;
> >       panel->drm = connector->dev;
> > +     info = &connector->display_info;
> > +     info->width_mm = panel->width_mm;
> > +     info->height_mm = panel->height_mm;
> > +     info->bpc = panel->bpc;
> > +     info->panel_orientation = panel->orientation;
> > +     info->bus_flags = panel->bus_flags;
> > +     if (panel->bus_formats)
> > +             drm_display_info_set_bus_formats(&connector->display_info,
> > +                                              panel->bus_formats,
> > +                                              panel->num_bus_formats);
> >
> >       return 0;
> >  }
> > @@ -126,6 +138,22 @@ EXPORT_SYMBOL(drm_panel_attach);
> >   */
> >  void drm_panel_detach(struct drm_panel *panel)
> >  {
> > +     struct drm_display_info *info;
> > +
> > +     if (!panel->connector)
> > +             goto out;
> > +
> > +     info = &panel->connector->display_info;
> > +     info->width_mm = 0;
> > +     info->height_mm = 0;
> > +     info->bpc = 0;
> > +     info->panel_orientation = DRM_MODE_PANEL_ORIENTATION_UNKNOWN;
> > +     info->bus_flags = 0;
> > +     kfree(info->bus_formats);
> > +     info->bus_formats = NULL;
> > +     info->num_bus_formats = 0;
> > +
> > +out:
> >       panel->connector = NULL;
> >       panel->drm = NULL;
> >  }
> > diff --git a/include/drm/drm_panel.h b/include/drm/drm_panel.h
> > index d16158deacdc..f3587a54b8ac 100644
> > --- a/include/drm/drm_panel.h
> > +++ b/include/drm/drm_panel.h
> > @@ -141,6 +141,56 @@ struct drm_panel {
> >        */
> >       const struct drm_panel_funcs *funcs;
> >
>
> All these new added members seems dupliated with drm_display_info,
> So I think, can we add a new drm_plane_funcs func:
>
> int (*set_display_info)(struct drm_panel *panel,
>                         struct drm_display_info *info);

I don't disagree personally, since I originally wrote it this way, but
2 maintainers, Daniel Vetter and Thierry Reding, requested that it be
changed. Unless that decision is reversed, I won't be changing this.

>
> Then in drm_panel_attach(), via this interface the specific panel
> driver can directly set connector->display_info. like
>
>    ...
>    if (panel->funcs && panel->funcs->set_display_info)
>                 panel->funcs->unprepare(panel, connector->display_info);
>    ...
>
> Thanks
> James
>
> > +     /**
> > +      * @width_mm:
> > +      *
> > +      * Physical width in mm.
> > +      */
> > +     unsigned int width_mm;
> > +
> > +     /**
> > +      * @height_mm:
> > +      *
> > +      * Physical height in mm.
> > +      */
> > +     unsigned int height_mm;
> > +
> > +     /**
> > +      * @bpc:
> > +      *
> > +      * Maximum bits per color channel. Used by HDMI and DP outputs.
> > +      */
> > +     unsigned int bpc;
> > +
> > +     /**
> > +      * @orientation
> > +      *
> > +      * Installation orientation of the panel with respect to the chassis.
> > +      */
> > +     int orientation;
> > +
> > +     /**
> > +      * @bus_formats
> > +      *
> > +      * Pixel data format on the wire.
> > +      */
> > +     const u32 *bus_formats;
> > +
> > +     /**
> > +      * @num_bus_formats:
> > +      *
> > +      * Number of elements pointed to by @bus_formats
> > +      */
> > +     unsigned int num_bus_formats;
> > +
> > +     /**
> > +      * @bus_flags:
> > +      *
> > +      * Additional information (like pixel signal polarity) for the pixel
> > +      * data on the bus.
> > +      */
> > +     u32 bus_flags;
> > +
> >       /**
> >        * @list:
> >        *

Thanks for the review