[Intel-gfx] [PATCH 10/11] drm/i915/display/vrr: Set IGNORE_MSA_PAR state in DP Sink

[Jani Nikula]

On Tue, 01 Dec 2020, "Navare, Manasi" <manasi.d.navare at intel.com> wrote:
> @Jani could you review this as well?

Okay, I'm going to cop out here and say that, while I don't see anything
wrong here, I also didn't go through all the specs and verify this is
the right place to do this stuff. Let's see the updated version first.

BR,
Jani.

>
> Manasi
>
>
> On Thu, Oct 22, 2020 at 03:27:08PM -0700, Manasi Navare wrote:
>> If VRR is enabled, the sink should ignore MSA parameters
>> and regenerate incoming video stream without depending
>> on these parameters. Hence set the MSA_TIMING_PAR_IGNORE_EN
>> bit if VRR is enabled.
>> Reset this bit on VRR disable.
>> 
>> Cc: Ville Syrjälä <ville.syrjala at linux.intel.com>
>> Cc: Jani Nikula <jani.nikula at linux.intel.com>
>> Signed-off-by: Manasi Navare <manasi.d.navare at intel.com>
>> ---
>>  drivers/gpu/drm/i915/display/intel_ddi.c | 25 ++++++++++++++++++++++++
>>  1 file changed, 25 insertions(+)
>> 
>> diff --git a/drivers/gpu/drm/i915/display/intel_ddi.c b/drivers/gpu/drm/i915/display/intel_ddi.c
>> index 565155af3fb9..195449dfec1e 100644
>> --- a/drivers/gpu/drm/i915/display/intel_ddi.c
>> +++ b/drivers/gpu/drm/i915/display/intel_ddi.c
>> @@ -3322,6 +3322,22 @@ i915_reg_t dp_tp_status_reg(struct intel_encoder *encoder,
>>  		return DP_TP_STATUS(encoder->port);
>>  }
>>  
>> +static void intel_dp_sink_set_msa_timing_par_ignore_state(struct intel_dp *intel_dp,
>> +							  const struct intel_crtc_state *crtc_state,
>> +							  bool enable)
>> +{
>> +	struct drm_i915_private *i915 = dp_to_i915(intel_dp);
>> +
>> +	if (!crtc_state->vrr.enable)
>> +		return;
>> +
>> +	if (drm_dp_dpcd_writeb(&intel_dp->aux, DP_DOWNSPREAD_CTRL,
>> +			       enable ? DP_MSA_TIMING_PAR_IGNORE_EN : 0) <= 0)
>> +		drm_dbg_kms(&i915->drm,
>> +			    "Failed to set MSA_TIMING_PAR_IGNORE %s in the sink\n",
>> +			    enable ? "enable" : "disable");
>> +}
>> +
>>  static void intel_dp_sink_set_fec_ready(struct intel_dp *intel_dp,
>>  					const struct intel_crtc_state *crtc_state)
>>  {
>> @@ -3493,6 +3509,12 @@ static void tgl_ddi_pre_enable_dp(struct intel_atomic_state *state,
>>  	 */
>>  	intel_dp_sink_set_fec_ready(intel_dp, crtc_state);
>>  
>> +	/*
>> +	 * Sink device should ignore MSA parameters and regenerate
>> +	 * incoming video stream in case of VRR/Adaptive Sync
>> +	 */
>> +	intel_dp_sink_set_msa_timing_par_ignore_state(intel_dp, crtc_state, true);
>> +
>>  	/*
>>  	 * 7.i Follow DisplayPort specification training sequence (see notes for
>>  	 *     failure handling)
>> @@ -4089,6 +4111,9 @@ static void intel_disable_ddi_dp(struct intel_atomic_state *state,
>>  	/* Disable the decompression in DP Sink */
>>  	intel_dp_sink_set_decompression_state(intel_dp, old_crtc_state,
>>  					      false);
>> +	/* Disable Ignore_MSA bit in DP Sink */
>> +	intel_dp_sink_set_msa_timing_par_ignore_state(intel_dp, old_crtc_state,
>> +						      false);
>>  }
>>  
>>  static void intel_disable_ddi_hdmi(struct intel_atomic_state *state,
>> -- 
>> 2.19.1
>> 

-- 
Jani Nikula, Intel Open Source Graphics Center