[Intel-gfx] [PATCH] drm/i915/rkl: Remove require_force_probe protection

[Kattamanchi, JaswanthX]

Hi Tejas,

As per your request triggered resume run on RKL CI machine, the testcases which chris mentioned were passing with this run, Please find the below logs for your reference 

Git ID : https://gitlab.freedesktop.org/drm/intel/-/issues/2743

igt at gem_exec_schedule@pi-ringfull at vcs0 : https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_9432/re-rkl-1/igt@gem_exec_schedule@pi-ringfull@vcs0.html

igt at gem_exec_schedule@pi-common at vcs0 : https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_9432/re-rkl-1/igt@gem_exec_schedule@pi-common@vcs0.html

Regards,
Jaswanth Kattamanchi

-----Original Message-----
From: Surendrakumar Upadhyay, TejaskumarX <tejaskumarx.surendrakumar.upadhyay at intel.com> 
Sent: Thursday, December 3, 2020 4:38 PM
To: Chris Wilson <chris at chris-wilson.co.uk>; Pandey, Hariom <hariom.pandey at intel.com>; intel-gfx at lists.freedesktop.org; Kattamanchi, JaswanthX <jaswanthx.kattamanchi at intel.com>
Cc: Naramasetti, LaxminarayanaX <laxminarayanax.naramasetti at intel.com>
Subject: RE: [Intel-gfx] [PATCH] drm/i915/rkl: Remove require_force_probe protection

+ Jaswant

> -----Original Message-----
> From: Surendrakumar Upadhyay, TejaskumarX
> Sent: 03 December 2020 09:44
> To: Chris Wilson <chris at chris-wilson.co.uk>; Pandey, Hariom 
> <hariom.pandey at intel.com>; intel-gfx at lists.freedesktop.org
> Subject: RE: [Intel-gfx] [PATCH] drm/i915/rkl: Remove 
> require_force_probe protection
> 
> Hi Jaswant,
> 
> Can you please re-run resume run on CI as well as local setup and 
> share results here? If it passes in full resume run in either of setup 
> we are good go with.
> 
> Thanks,
> Tejas
> 
> > -----Original Message-----
> > From: Chris Wilson <chris at chris-wilson.co.uk>
> > Sent: 30 November 2020 20:31
> > To: Pandey, Hariom <hariom.pandey at intel.com>; Surendrakumar
> Upadhyay,
> > TejaskumarX <tejaskumarx.surendrakumar.upadhyay at intel.com>; intel- 
> > gfx at lists.freedesktop.org
> > Subject: Re: [Intel-gfx] [PATCH] drm/i915/rkl: Remove 
> > require_force_probe protection
> >
> > Quoting Surendrakumar Upadhyay, TejaskumarX (2020-11-30 14:45:14)
> > > Hi Chris,
> > >
> > > The failing test was not part of BAT run, it ran in CI resume run 
> > > and failed
> > there, however on manual run the same test got passed. Please find 
> > attached results.
> >
> > One pass versus a major failure is not satisfactory.
> >
> > We can not say we are happy with the hardware/driver until it is 
> > reliable, and forcewake is of fundamental importance for mmio 
> > access, as well as execution.
> > -Chris