[Intel-gfx] ✗ Fi.CI.CHECKPATCH: warning for series starting with [1/4] drm/i915: refactor cursor code out of i915_display.c
Patchwork
patchwork at emeril.freedesktop.org
Wed Dec 9 04:56:05 UTC 2020
== Series Details ==
Series: series starting with [1/4] drm/i915: refactor cursor code out of i915_display.c
URL : https://patchwork.freedesktop.org/series/84712/
State : warning
== Summary ==
$ dim checkpatch origin/drm-tip
b87be3dc234f drm/i915: refactor cursor code out of i915_display.c
-:24: WARNING:FILE_PATH_CHANGES: added, moved or deleted file(s), does MAINTAINERS need updating?
#24:
new file mode 100644
-:534: WARNING:UNSPECIFIED_INT: Prefer 'unsigned int' to bare use of 'unsigned'
#534: FILE: drivers/gpu/drm/i915/display/intel_cursor.c:506:
+ unsigned width = drm_rect_width(&plane_state->uapi.dst);
-:535: WARNING:UNSPECIFIED_INT: Prefer 'unsigned int' to bare use of 'unsigned'
#535: FILE: drivers/gpu/drm/i915/display/intel_cursor.c:507:
+ unsigned height = drm_rect_height(&plane_state->uapi.dst);
-:564: WARNING:REPEATED_WORD: Possible repeated word: 'by'
#564: FILE: drivers/gpu/drm/i915/display/intel_cursor.c:536:
+ * The other registers are armed by by the CURBASE write
-:791: CHECK:SPACING: No space is necessary after a cast
#791: FILE: drivers/gpu/drm/i915/display/intel_cursor.c:763:
+ cursor->i9xx_plane = (enum i9xx_plane_id) pipe;
total: 0 errors, 4 warnings, 1 checks, 1692 lines checked
f86b532a437f drm/i915: refactor some crtc code out of intel display.
-:26: WARNING:FILE_PATH_CHANGES: added, moved or deleted file(s), does MAINTAINERS need updating?
#26:
new file mode 100644
-:601: CHECK:SPACING: spaces preferred around that '*' (ctx:VxV)
#601: FILE: drivers/gpu/drm/i915/display/intel_crtc.c:571:
+ return 32*1024;
^
-:604: CHECK:SPACING: spaces preferred around that '*' (ctx:VxV)
#604: FILE: drivers/gpu/drm/i915/display/intel_crtc.c:574:
+ return 16*1024;
^
-:606: CHECK:SPACING: spaces preferred around that '*' (ctx:VxV)
#606: FILE: drivers/gpu/drm/i915/display/intel_crtc.c:576:
+ return 32*1024;
^
-:609: CHECK:SPACING: spaces preferred around that '*' (ctx:VxV)
#609: FILE: drivers/gpu/drm/i915/display/intel_crtc.c:579:
+ return 8*1024;
^
-:611: CHECK:SPACING: spaces preferred around that '*' (ctx:VxV)
#611: FILE: drivers/gpu/drm/i915/display/intel_crtc.c:581:
+ return 16*1024;
^
-:614: CHECK:SPACING: spaces preferred around that '*' (ctx:VxV)
#614: FILE: drivers/gpu/drm/i915/display/intel_crtc.c:584:
+ return 4*1024;
^
-:616: CHECK:SPACING: spaces preferred around that '*' (ctx:VxV)
#616: FILE: drivers/gpu/drm/i915/display/intel_crtc.c:586:
+ return 8*1024;
^
-:663: CHECK:SPACING: No space is necessary after a cast
#663: FILE: drivers/gpu/drm/i915/display/intel_crtc.c:633:
+ plane->i9xx_plane = (enum i9xx_plane_id) !pipe;
-:665: CHECK:SPACING: No space is necessary after a cast
#665: FILE: drivers/gpu/drm/i915/display/intel_crtc.c:635:
+ plane->i9xx_plane = (enum i9xx_plane_id) pipe;
-:952: WARNING:AVOID_BUG: Avoid crashing the kernel - try using WARN_ON & recovery code rather than BUG() or BUG_ON()
#952: FILE: drivers/gpu/drm/i915/display/intel_crtc.c:922:
+ BUG_ON(pipe >= ARRAY_SIZE(dev_priv->pipe_to_crtc_mapping) ||
-:953: CHECK:COMPARISON_TO_NULL: Comparison to NULL could be written "dev_priv->pipe_to_crtc_mapping[pipe]"
#953: FILE: drivers/gpu/drm/i915/display/intel_crtc.c:923:
+ dev_priv->pipe_to_crtc_mapping[pipe] != NULL);
-:959: WARNING:AVOID_BUG: Avoid crashing the kernel - try using WARN_ON & recovery code rather than BUG() or BUG_ON()
#959: FILE: drivers/gpu/drm/i915/display/intel_crtc.c:929:
+ BUG_ON(i9xx_plane >= ARRAY_SIZE(dev_priv->plane_to_crtc_mapping) ||
-:960: CHECK:COMPARISON_TO_NULL: Comparison to NULL could be written "dev_priv->plane_to_crtc_mapping[i9xx_plane]"
#960: FILE: drivers/gpu/drm/i915/display/intel_crtc.c:930:
+ dev_priv->plane_to_crtc_mapping[i9xx_plane] != NULL);
-:966: CHECK:PARENTHESIS_ALIGNMENT: Alignment should match open parenthesis
#966: FILE: drivers/gpu/drm/i915/display/intel_crtc.c:936:
+ drm_crtc_create_scaling_filter_property(&crtc->base,
+ BIT(DRM_SCALING_FILTER_DEFAULT) |
total: 0 errors, 3 warnings, 12 checks, 1969 lines checked
b45ec2e66b7d drm/i915: refactor pll code out into intel_clock.c
-:30: WARNING:FILE_PATH_CHANGES: added, moved or deleted file(s), does MAINTAINERS need updating?
#30:
new file mode 100644
-:50: CHECK:LOGICAL_CONTINUATIONS: Logical continuations should be on the previous line
#50: FILE: drivers/gpu/drm/i915/display/intel_clock.c:16:
+ return dev_priv->vbt.lvds_use_ssc
+ && !(dev_priv->quirks & QUIRK_LVDS_SSC_DISABLE);
-:63: CHECK:LINE_SPACING: Please use a blank line after function/struct/union/enum declarations
#63: FILE: drivers/gpu/drm/i915/display/intel_clock.c:29:
+};
+static const struct intel_limit intel_limits_i8xx_dac = {
-:128: CHECK:LINE_SPACING: Please don't use multiple blank lines
#128: FILE: drivers/gpu/drm/i915/display/intel_clock.c:94:
+
+
-:700: WARNING:LONG_LINE: line length of 103 exceeds 100 columns
#700: FILE: drivers/gpu/drm/i915/display/intel_clock.c:666:
+ for (clock.m1 = limit->m1.min; clock.m1 <= limit->m1.max; clock.m1++) {
-:771: CHECK:SPACING: spaces preferred around that '/' (ctx:VxV)
#771: FILE: drivers/gpu/drm/i915/display/intel_clock.c:737:
+ if (m2 > INT_MAX/clock.m1)
^
-:868: CHECK:BRACES: braces {} should be used on all arms of this statement
#868: FILE: drivers/gpu/drm/i915/display/intel_clock.c:834:
+ if (IS_PINEVIEW(dev_priv))
[...]
+ else {
[...]
-:870: CHECK:BRACES: Unbalanced braces around else statement
#870: FILE: drivers/gpu/drm/i915/display/intel_clock.c:836:
+ else {
-:988: CHECK:LINE_SPACING: Please don't use multiple blank lines
#988: FILE: drivers/gpu/drm/i915/display/intel_clock.c:954:
+
+
total: 0 errors, 2 warnings, 7 checks, 2895 lines checked
a10cb379b7b4 drm/i915: split fdi code out from intel_display.c
-:785: WARNING:FILE_PATH_CHANGES: added, moved or deleted file(s), does MAINTAINERS need updating?
#785:
new file mode 100644
-:880: WARNING:AVOID_BUG: Avoid crashing the kernel - try using WARN_ON & recovery code rather than BUG() or BUG_ON()
#880: FILE: drivers/gpu/drm/i915/display/intel_fdi.c:91:
+ BUG();
-:885: CHECK:PARENTHESIS_ALIGNMENT: Alignment should match open parenthesis
#885: FILE: drivers/gpu/drm/i915/display/intel_fdi.c:96:
+int ilk_fdi_compute_config(struct intel_crtc *intel_crtc,
+ struct intel_crtc_state *pipe_config)
-:917: CHECK:SPACING: spaces preferred around that '*' (ctx:VxV)
#917: FILE: drivers/gpu/drm/i915/display/intel_fdi.c:128:
+ if (ret == -EINVAL && pipe_config->pipe_bpp > 6*3) {
^
-:918: CHECK:SPACING: spaces preferred around that '*' (ctx:VxV)
#918: FILE: drivers/gpu/drm/i915/display/intel_fdi.c:129:
+ pipe_config->pipe_bpp -= 2*3;
^
-:967: CHECK:USLEEP_RANGE: usleep_range is preferred over udelay; see Documentation/timers/timers-howto.rst
#967: FILE: drivers/gpu/drm/i915/display/intel_fdi.c:178:
+ udelay(1000);
-:972: WARNING:LONG_LINE: line length of 103 exceeds 100 columns
#972: FILE: drivers/gpu/drm/i915/display/intel_fdi.c:183:
+ intel_de_read(dev_priv, reg) | FDI_FS_ERRC_ENABLE | FDI_FE_ERRC_ENABLE);
-:989: WARNING:BLOCK_COMMENT_STYLE: Block comments use * on subsequent lines
#989: FILE: drivers/gpu/drm/i915/display/intel_fdi.c:200:
+ /* Train 1: umask FDI RX Interrupt symbol_lock and bit_lock bit
+ for train result */
-:989: WARNING:BLOCK_COMMENT_STYLE: Block comments use a trailing */ on a separate line
#989: FILE: drivers/gpu/drm/i915/display/intel_fdi.c:200:
+ for train result */
-:996: CHECK:USLEEP_RANGE: usleep_range is preferred over udelay; see Documentation/timers/timers-howto.rst
#996: FILE: drivers/gpu/drm/i915/display/intel_fdi.c:207:
+ udelay(150);
-:1014: CHECK:USLEEP_RANGE: usleep_range is preferred over udelay; see Documentation/timers/timers-howto.rst
#1014: FILE: drivers/gpu/drm/i915/display/intel_fdi.c:225:
+ udelay(150);
-:1050: CHECK:USLEEP_RANGE: usleep_range is preferred over udelay; see Documentation/timers/timers-howto.rst
#1050: FILE: drivers/gpu/drm/i915/display/intel_fdi.c:261:
+ udelay(150);
-:1069: CHECK:BRACES: Blank lines aren't necessary before a close brace '}'
#1069: FILE: drivers/gpu/drm/i915/display/intel_fdi.c:280:
+
+}
-:1089: WARNING:BLOCK_COMMENT_STYLE: Block comments use * on subsequent lines
#1089: FILE: drivers/gpu/drm/i915/display/intel_fdi.c:300:
+ /* Train 1: umask FDI RX Interrupt symbol_lock and bit_lock bit
+ for train result */
-:1089: WARNING:BLOCK_COMMENT_STYLE: Block comments use a trailing */ on a separate line
#1089: FILE: drivers/gpu/drm/i915/display/intel_fdi.c:300:
+ for train result */
-:1097: CHECK:USLEEP_RANGE: usleep_range is preferred over udelay; see Documentation/timers/timers-howto.rst
#1097: FILE: drivers/gpu/drm/i915/display/intel_fdi.c:308:
+ udelay(150);
-:1126: CHECK:USLEEP_RANGE: usleep_range is preferred over udelay; see Documentation/timers/timers-howto.rst
#1126: FILE: drivers/gpu/drm/i915/display/intel_fdi.c:337:
+ udelay(150);
-:1136: CHECK:USLEEP_RANGE: usleep_range is preferred over udelay; see Documentation/timers/timers-howto.rst
#1136: FILE: drivers/gpu/drm/i915/display/intel_fdi.c:347:
+ udelay(500);
-:1149: CHECK:USLEEP_RANGE: usleep_range is preferred over udelay; see Documentation/timers/timers-howto.rst
#1149: FILE: drivers/gpu/drm/i915/display/intel_fdi.c:360:
+ udelay(50);
-:1181: CHECK:USLEEP_RANGE: usleep_range is preferred over udelay; see Documentation/timers/timers-howto.rst
#1181: FILE: drivers/gpu/drm/i915/display/intel_fdi.c:392:
+ udelay(150);
-:1191: CHECK:USLEEP_RANGE: usleep_range is preferred over udelay; see Documentation/timers/timers-howto.rst
#1191: FILE: drivers/gpu/drm/i915/display/intel_fdi.c:402:
+ udelay(500);
-:1204: CHECK:USLEEP_RANGE: usleep_range is preferred over udelay; see Documentation/timers/timers-howto.rst
#1204: FILE: drivers/gpu/drm/i915/display/intel_fdi.c:415:
+ udelay(50);
-:1226: WARNING:BLOCK_COMMENT_STYLE: Block comments use * on subsequent lines
#1226: FILE: drivers/gpu/drm/i915/display/intel_fdi.c:437:
+ /* Train 1: umask FDI RX Interrupt symbol_lock and bit_lock bit
+ for train result */
-:1226: WARNING:BLOCK_COMMENT_STYLE: Block comments use a trailing */ on a separate line
#1226: FILE: drivers/gpu/drm/i915/display/intel_fdi.c:437:
+ for train result */
-:1234: CHECK:USLEEP_RANGE: usleep_range is preferred over udelay; see Documentation/timers/timers-howto.rst
#1234: FILE: drivers/gpu/drm/i915/display/intel_fdi.c:445:
+ udelay(150);
-:1262: CHECK:SPACING: spaces preferred around that '/' (ctx:VxV)
#1262: FILE: drivers/gpu/drm/i915/display/intel_fdi.c:473:
+ temp |= snb_b_fdi_train_param[j/2];
^
-:1358: CHECK:USLEEP_RANGE: usleep_range is preferred over udelay; see Documentation/timers/timers-howto.rst
#1358: FILE: drivers/gpu/drm/i915/display/intel_fdi.c:569:
+ udelay(200);
-:1365: CHECK:USLEEP_RANGE: usleep_range is preferred over udelay; see Documentation/timers/timers-howto.rst
#1365: FILE: drivers/gpu/drm/i915/display/intel_fdi.c:576:
+ udelay(200);
-:1374: CHECK:USLEEP_RANGE: usleep_range is preferred over udelay; see Documentation/timers/timers-howto.rst
#1374: FILE: drivers/gpu/drm/i915/display/intel_fdi.c:585:
+ udelay(100);
-:1397: CHECK:USLEEP_RANGE: usleep_range is preferred over udelay; see Documentation/timers/timers-howto.rst
#1397: FILE: drivers/gpu/drm/i915/display/intel_fdi.c:608:
+ udelay(100);
-:1405: CHECK:USLEEP_RANGE: usleep_range is preferred over udelay; see Documentation/timers/timers-howto.rst
#1405: FILE: drivers/gpu/drm/i915/display/intel_fdi.c:616:
+ udelay(100);
-:1428: CHECK:USLEEP_RANGE: usleep_range is preferred over udelay; see Documentation/timers/timers-howto.rst
#1428: FILE: drivers/gpu/drm/i915/display/intel_fdi.c:639:
+ udelay(100);
-:1457: CHECK:USLEEP_RANGE: usleep_range is preferred over udelay; see Documentation/timers/timers-howto.rst
#1457: FILE: drivers/gpu/drm/i915/display/intel_fdi.c:668:
+ udelay(100);
total: 0 errors, 9 warnings, 24 checks, 1432 lines checked
More information about the Intel-gfx
mailing list