[Intel-gfx] [PATCH 11/13] drm/i915: move pipe update code into crtc.
Dave Airlie
airlied at gmail.com
Fri Dec 18 06:04:18 UTC 2020
From: Dave Airlie <airlied at redhat.com>
Daniel suggested this should move here.
Signed-off-by: Dave Airlie <airlied at redhat.com>
Signed-off-by: Jani Nikula <jani.nikula at intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala at linux.intel.com>
---
drivers/gpu/drm/i915/display/intel_crtc.c | 230 ++++++++++++++++++++
drivers/gpu/drm/i915/display/intel_sprite.c | 228 -------------------
2 files changed, 230 insertions(+), 228 deletions(-)
diff --git a/drivers/gpu/drm/i915/display/intel_crtc.c b/drivers/gpu/drm/i915/display/intel_crtc.c
index d89cf6f2d97d..c1490ffa8ea9 100644
--- a/drivers/gpu/drm/i915/display/intel_crtc.c
+++ b/drivers/gpu/drm/i915/display/intel_crtc.c
@@ -10,6 +10,9 @@
#include <drm/drm_plane.h>
#include <drm/drm_plane_helper.h>
+#include "i915_trace.h"
+#include "i915_vgpu.h"
+
#include "intel_atomic.h"
#include "intel_atomic_plane.h"
#include "intel_color.h"
@@ -17,7 +20,9 @@
#include "intel_cursor.h"
#include "intel_display_debugfs.h"
#include "intel_display_types.h"
+#include "intel_dsi.h"
#include "intel_pipe_crc.h"
+#include "intel_psr.h"
#include "intel_sprite.h"
#include "i9xx_plane.h"
#include "skl_universal_plane.h"
@@ -333,3 +338,228 @@ int intel_crtc_init(struct drm_i915_private *dev_priv, enum pipe pipe)
return ret;
}
+
+int intel_usecs_to_scanlines(const struct drm_display_mode *adjusted_mode,
+ int usecs)
+{
+ /* paranoia */
+ if (!adjusted_mode->crtc_htotal)
+ return 1;
+
+ return DIV_ROUND_UP(usecs * adjusted_mode->crtc_clock,
+ 1000 * adjusted_mode->crtc_htotal);
+}
+
+/**
+ * intel_pipe_update_start() - start update of a set of display registers
+ * @new_crtc_state: the new crtc state
+ *
+ * Mark the start of an update to pipe registers that should be updated
+ * atomically regarding vblank. If the next vblank will happens within
+ * the next 100 us, this function waits until the vblank passes.
+ *
+ * After a successful call to this function, interrupts will be disabled
+ * until a subsequent call to intel_pipe_update_end(). That is done to
+ * avoid random delays.
+ */
+void intel_pipe_update_start(const struct intel_crtc_state *new_crtc_state)
+{
+ struct intel_crtc *crtc = to_intel_crtc(new_crtc_state->uapi.crtc);
+ struct drm_i915_private *dev_priv = to_i915(crtc->base.dev);
+ const struct drm_display_mode *adjusted_mode = &new_crtc_state->hw.adjusted_mode;
+ long timeout = msecs_to_jiffies_timeout(1);
+ int scanline, min, max, vblank_start;
+ wait_queue_head_t *wq = drm_crtc_vblank_waitqueue(&crtc->base);
+ bool need_vlv_dsi_wa = (IS_VALLEYVIEW(dev_priv) || IS_CHERRYVIEW(dev_priv)) &&
+ intel_crtc_has_type(new_crtc_state, INTEL_OUTPUT_DSI);
+ DEFINE_WAIT(wait);
+ u32 psr_status;
+
+ if (new_crtc_state->uapi.async_flip)
+ return;
+
+ vblank_start = adjusted_mode->crtc_vblank_start;
+ if (adjusted_mode->flags & DRM_MODE_FLAG_INTERLACE)
+ vblank_start = DIV_ROUND_UP(vblank_start, 2);
+
+ /* FIXME needs to be calibrated sensibly */
+ min = vblank_start - intel_usecs_to_scanlines(adjusted_mode,
+ VBLANK_EVASION_TIME_US);
+ max = vblank_start - 1;
+
+ if (min <= 0 || max <= 0)
+ goto irq_disable;
+
+ if (drm_WARN_ON(&dev_priv->drm, drm_crtc_vblank_get(&crtc->base)))
+ goto irq_disable;
+
+ /*
+ * Wait for psr to idle out after enabling the VBL interrupts
+ * VBL interrupts will start the PSR exit and prevent a PSR
+ * re-entry as well.
+ */
+ if (intel_psr_wait_for_idle(new_crtc_state, &psr_status))
+ drm_err(&dev_priv->drm,
+ "PSR idle timed out 0x%x, atomic update may fail\n",
+ psr_status);
+
+ local_irq_disable();
+
+ crtc->debug.min_vbl = min;
+ crtc->debug.max_vbl = max;
+ trace_intel_pipe_update_start(crtc);
+
+ for (;;) {
+ /*
+ * prepare_to_wait() has a memory barrier, which guarantees
+ * other CPUs can see the task state update by the time we
+ * read the scanline.
+ */
+ prepare_to_wait(wq, &wait, TASK_UNINTERRUPTIBLE);
+
+ scanline = intel_get_crtc_scanline(crtc);
+ if (scanline < min || scanline > max)
+ break;
+
+ if (!timeout) {
+ drm_err(&dev_priv->drm,
+ "Potential atomic update failure on pipe %c\n",
+ pipe_name(crtc->pipe));
+ break;
+ }
+
+ local_irq_enable();
+
+ timeout = schedule_timeout(timeout);
+
+ local_irq_disable();
+ }
+
+ finish_wait(wq, &wait);
+
+ drm_crtc_vblank_put(&crtc->base);
+
+ /*
+ * On VLV/CHV DSI the scanline counter would appear to
+ * increment approx. 1/3 of a scanline before start of vblank.
+ * The registers still get latched at start of vblank however.
+ * This means we must not write any registers on the first
+ * line of vblank (since not the whole line is actually in
+ * vblank). And unfortunately we can't use the interrupt to
+ * wait here since it will fire too soon. We could use the
+ * frame start interrupt instead since it will fire after the
+ * critical scanline, but that would require more changes
+ * in the interrupt code. So for now we'll just do the nasty
+ * thing and poll for the bad scanline to pass us by.
+ *
+ * FIXME figure out if BXT+ DSI suffers from this as well
+ */
+ while (need_vlv_dsi_wa && scanline == vblank_start)
+ scanline = intel_get_crtc_scanline(crtc);
+
+ crtc->debug.scanline_start = scanline;
+ crtc->debug.start_vbl_time = ktime_get();
+ crtc->debug.start_vbl_count = intel_crtc_get_vblank_counter(crtc);
+
+ trace_intel_pipe_update_vblank_evaded(crtc);
+ return;
+
+irq_disable:
+ local_irq_disable();
+}
+
+#if IS_ENABLED(CONFIG_DRM_I915_DEBUG_VBLANK_EVADE)
+static void dbg_vblank_evade(struct intel_crtc *crtc, ktime_t end)
+{
+ u64 delta = ktime_to_ns(ktime_sub(end, crtc->debug.start_vbl_time));
+ unsigned int h;
+
+ h = ilog2(delta >> 9);
+ if (h >= ARRAY_SIZE(crtc->debug.vbl.times))
+ h = ARRAY_SIZE(crtc->debug.vbl.times) - 1;
+ crtc->debug.vbl.times[h]++;
+
+ crtc->debug.vbl.sum += delta;
+ if (!crtc->debug.vbl.min || delta < crtc->debug.vbl.min)
+ crtc->debug.vbl.min = delta;
+ if (delta > crtc->debug.vbl.max)
+ crtc->debug.vbl.max = delta;
+
+ if (delta > 1000 * VBLANK_EVASION_TIME_US) {
+ drm_dbg_kms(crtc->base.dev,
+ "Atomic update on pipe (%c) took %lld us, max time under evasion is %u us\n",
+ pipe_name(crtc->pipe),
+ div_u64(delta, 1000),
+ VBLANK_EVASION_TIME_US);
+ crtc->debug.vbl.over++;
+ }
+}
+#else
+static void dbg_vblank_evade(struct intel_crtc *crtc, ktime_t end) {}
+#endif
+
+/**
+ * intel_pipe_update_end() - end update of a set of display registers
+ * @new_crtc_state: the new crtc state
+ *
+ * Mark the end of an update started with intel_pipe_update_start(). This
+ * re-enables interrupts and verifies the update was actually completed
+ * before a vblank.
+ */
+void intel_pipe_update_end(struct intel_crtc_state *new_crtc_state)
+{
+ struct intel_crtc *crtc = to_intel_crtc(new_crtc_state->uapi.crtc);
+ enum pipe pipe = crtc->pipe;
+ int scanline_end = intel_get_crtc_scanline(crtc);
+ u32 end_vbl_count = intel_crtc_get_vblank_counter(crtc);
+ ktime_t end_vbl_time = ktime_get();
+ struct drm_i915_private *dev_priv = to_i915(crtc->base.dev);
+
+ if (new_crtc_state->uapi.async_flip)
+ return;
+
+ trace_intel_pipe_update_end(crtc, end_vbl_count, scanline_end);
+
+ /*
+ * Incase of mipi dsi command mode, we need to set frame update
+ * request for every commit.
+ */
+ if (INTEL_GEN(dev_priv) >= 11 &&
+ intel_crtc_has_type(new_crtc_state, INTEL_OUTPUT_DSI))
+ icl_dsi_frame_update(new_crtc_state);
+
+ /* We're still in the vblank-evade critical section, this can't race.
+ * Would be slightly nice to just grab the vblank count and arm the
+ * event outside of the critical section - the spinlock might spin for a
+ * while ... */
+ if (new_crtc_state->uapi.event) {
+ drm_WARN_ON(&dev_priv->drm,
+ drm_crtc_vblank_get(&crtc->base) != 0);
+
+ spin_lock(&crtc->base.dev->event_lock);
+ drm_crtc_arm_vblank_event(&crtc->base,
+ new_crtc_state->uapi.event);
+ spin_unlock(&crtc->base.dev->event_lock);
+
+ new_crtc_state->uapi.event = NULL;
+ }
+
+ local_irq_enable();
+
+ if (intel_vgpu_active(dev_priv))
+ return;
+
+ if (crtc->debug.start_vbl_count &&
+ crtc->debug.start_vbl_count != end_vbl_count) {
+ drm_err(&dev_priv->drm,
+ "Atomic update failure on pipe %c (start=%u end=%u) time %lld us, min %d, max %d, scanline start %d, end %d\n",
+ pipe_name(pipe), crtc->debug.start_vbl_count,
+ end_vbl_count,
+ ktime_us_delta(end_vbl_time,
+ crtc->debug.start_vbl_time),
+ crtc->debug.min_vbl, crtc->debug.max_vbl,
+ crtc->debug.scanline_start, scanline_end);
+ }
+
+ dbg_vblank_evade(crtc, end_vbl_time);
+}
diff --git a/drivers/gpu/drm/i915/display/intel_sprite.c b/drivers/gpu/drm/i915/display/intel_sprite.c
index 39c5da805ca8..38fafdd05c42 100644
--- a/drivers/gpu/drm/i915/display/intel_sprite.c
+++ b/drivers/gpu/drm/i915/display/intel_sprite.c
@@ -45,237 +45,9 @@
#include "intel_atomic_plane.h"
#include "intel_display_types.h"
#include "intel_frontbuffer.h"
-#include "intel_pm.h"
-#include "intel_psr.h"
-#include "intel_dsi.h"
#include "intel_sprite.h"
#include "i9xx_plane.h"
-int intel_usecs_to_scanlines(const struct drm_display_mode *adjusted_mode,
- int usecs)
-{
- /* paranoia */
- if (!adjusted_mode->crtc_htotal)
- return 1;
-
- return DIV_ROUND_UP(usecs * adjusted_mode->crtc_clock,
- 1000 * adjusted_mode->crtc_htotal);
-}
-
-/**
- * intel_pipe_update_start() - start update of a set of display registers
- * @new_crtc_state: the new crtc state
- *
- * Mark the start of an update to pipe registers that should be updated
- * atomically regarding vblank. If the next vblank will happens within
- * the next 100 us, this function waits until the vblank passes.
- *
- * After a successful call to this function, interrupts will be disabled
- * until a subsequent call to intel_pipe_update_end(). That is done to
- * avoid random delays.
- */
-void intel_pipe_update_start(const struct intel_crtc_state *new_crtc_state)
-{
- struct intel_crtc *crtc = to_intel_crtc(new_crtc_state->uapi.crtc);
- struct drm_i915_private *dev_priv = to_i915(crtc->base.dev);
- const struct drm_display_mode *adjusted_mode = &new_crtc_state->hw.adjusted_mode;
- long timeout = msecs_to_jiffies_timeout(1);
- int scanline, min, max, vblank_start;
- wait_queue_head_t *wq = drm_crtc_vblank_waitqueue(&crtc->base);
- bool need_vlv_dsi_wa = (IS_VALLEYVIEW(dev_priv) || IS_CHERRYVIEW(dev_priv)) &&
- intel_crtc_has_type(new_crtc_state, INTEL_OUTPUT_DSI);
- DEFINE_WAIT(wait);
- u32 psr_status;
-
- if (new_crtc_state->uapi.async_flip)
- return;
-
- vblank_start = adjusted_mode->crtc_vblank_start;
- if (adjusted_mode->flags & DRM_MODE_FLAG_INTERLACE)
- vblank_start = DIV_ROUND_UP(vblank_start, 2);
-
- /* FIXME needs to be calibrated sensibly */
- min = vblank_start - intel_usecs_to_scanlines(adjusted_mode,
- VBLANK_EVASION_TIME_US);
- max = vblank_start - 1;
-
- if (min <= 0 || max <= 0)
- goto irq_disable;
-
- if (drm_WARN_ON(&dev_priv->drm, drm_crtc_vblank_get(&crtc->base)))
- goto irq_disable;
-
- /*
- * Wait for psr to idle out after enabling the VBL interrupts
- * VBL interrupts will start the PSR exit and prevent a PSR
- * re-entry as well.
- */
- if (intel_psr_wait_for_idle(new_crtc_state, &psr_status))
- drm_err(&dev_priv->drm,
- "PSR idle timed out 0x%x, atomic update may fail\n",
- psr_status);
-
- local_irq_disable();
-
- crtc->debug.min_vbl = min;
- crtc->debug.max_vbl = max;
- trace_intel_pipe_update_start(crtc);
-
- for (;;) {
- /*
- * prepare_to_wait() has a memory barrier, which guarantees
- * other CPUs can see the task state update by the time we
- * read the scanline.
- */
- prepare_to_wait(wq, &wait, TASK_UNINTERRUPTIBLE);
-
- scanline = intel_get_crtc_scanline(crtc);
- if (scanline < min || scanline > max)
- break;
-
- if (!timeout) {
- drm_err(&dev_priv->drm,
- "Potential atomic update failure on pipe %c\n",
- pipe_name(crtc->pipe));
- break;
- }
-
- local_irq_enable();
-
- timeout = schedule_timeout(timeout);
-
- local_irq_disable();
- }
-
- finish_wait(wq, &wait);
-
- drm_crtc_vblank_put(&crtc->base);
-
- /*
- * On VLV/CHV DSI the scanline counter would appear to
- * increment approx. 1/3 of a scanline before start of vblank.
- * The registers still get latched at start of vblank however.
- * This means we must not write any registers on the first
- * line of vblank (since not the whole line is actually in
- * vblank). And unfortunately we can't use the interrupt to
- * wait here since it will fire too soon. We could use the
- * frame start interrupt instead since it will fire after the
- * critical scanline, but that would require more changes
- * in the interrupt code. So for now we'll just do the nasty
- * thing and poll for the bad scanline to pass us by.
- *
- * FIXME figure out if BXT+ DSI suffers from this as well
- */
- while (need_vlv_dsi_wa && scanline == vblank_start)
- scanline = intel_get_crtc_scanline(crtc);
-
- crtc->debug.scanline_start = scanline;
- crtc->debug.start_vbl_time = ktime_get();
- crtc->debug.start_vbl_count = intel_crtc_get_vblank_counter(crtc);
-
- trace_intel_pipe_update_vblank_evaded(crtc);
- return;
-
-irq_disable:
- local_irq_disable();
-}
-
-#if IS_ENABLED(CONFIG_DRM_I915_DEBUG_VBLANK_EVADE)
-static void dbg_vblank_evade(struct intel_crtc *crtc, ktime_t end)
-{
- u64 delta = ktime_to_ns(ktime_sub(end, crtc->debug.start_vbl_time));
- unsigned int h;
-
- h = ilog2(delta >> 9);
- if (h >= ARRAY_SIZE(crtc->debug.vbl.times))
- h = ARRAY_SIZE(crtc->debug.vbl.times) - 1;
- crtc->debug.vbl.times[h]++;
-
- crtc->debug.vbl.sum += delta;
- if (!crtc->debug.vbl.min || delta < crtc->debug.vbl.min)
- crtc->debug.vbl.min = delta;
- if (delta > crtc->debug.vbl.max)
- crtc->debug.vbl.max = delta;
-
- if (delta > 1000 * VBLANK_EVASION_TIME_US) {
- drm_dbg_kms(crtc->base.dev,
- "Atomic update on pipe (%c) took %lld us, max time under evasion is %u us\n",
- pipe_name(crtc->pipe),
- div_u64(delta, 1000),
- VBLANK_EVASION_TIME_US);
- crtc->debug.vbl.over++;
- }
-}
-#else
-static void dbg_vblank_evade(struct intel_crtc *crtc, ktime_t end) {}
-#endif
-
-/**
- * intel_pipe_update_end() - end update of a set of display registers
- * @new_crtc_state: the new crtc state
- *
- * Mark the end of an update started with intel_pipe_update_start(). This
- * re-enables interrupts and verifies the update was actually completed
- * before a vblank.
- */
-void intel_pipe_update_end(struct intel_crtc_state *new_crtc_state)
-{
- struct intel_crtc *crtc = to_intel_crtc(new_crtc_state->uapi.crtc);
- enum pipe pipe = crtc->pipe;
- int scanline_end = intel_get_crtc_scanline(crtc);
- u32 end_vbl_count = intel_crtc_get_vblank_counter(crtc);
- ktime_t end_vbl_time = ktime_get();
- struct drm_i915_private *dev_priv = to_i915(crtc->base.dev);
-
- if (new_crtc_state->uapi.async_flip)
- return;
-
- trace_intel_pipe_update_end(crtc, end_vbl_count, scanline_end);
-
- /*
- * Incase of mipi dsi command mode, we need to set frame update
- * request for every commit.
- */
- if (INTEL_GEN(dev_priv) >= 11 &&
- intel_crtc_has_type(new_crtc_state, INTEL_OUTPUT_DSI))
- icl_dsi_frame_update(new_crtc_state);
-
- /* We're still in the vblank-evade critical section, this can't race.
- * Would be slightly nice to just grab the vblank count and arm the
- * event outside of the critical section - the spinlock might spin for a
- * while ... */
- if (new_crtc_state->uapi.event) {
- drm_WARN_ON(&dev_priv->drm,
- drm_crtc_vblank_get(&crtc->base) != 0);
-
- spin_lock(&crtc->base.dev->event_lock);
- drm_crtc_arm_vblank_event(&crtc->base,
- new_crtc_state->uapi.event);
- spin_unlock(&crtc->base.dev->event_lock);
-
- new_crtc_state->uapi.event = NULL;
- }
-
- local_irq_enable();
-
- if (intel_vgpu_active(dev_priv))
- return;
-
- if (crtc->debug.start_vbl_count &&
- crtc->debug.start_vbl_count != end_vbl_count) {
- drm_err(&dev_priv->drm,
- "Atomic update failure on pipe %c (start=%u end=%u) time %lld us, min %d, max %d, scanline start %d, end %d\n",
- pipe_name(pipe), crtc->debug.start_vbl_count,
- end_vbl_count,
- ktime_us_delta(end_vbl_time,
- crtc->debug.start_vbl_time),
- crtc->debug.min_vbl, crtc->debug.max_vbl,
- crtc->debug.scanline_start, scanline_end);
- }
-
- dbg_vblank_evade(crtc, end_vbl_time);
-}
-
int intel_plane_check_stride(const struct intel_plane_state *plane_state)
{
struct intel_plane *plane = to_intel_plane(plane_state->uapi.plane);
--
2.27.0
More information about the Intel-gfx
mailing list