[Intel-gfx] [PATCH resend 1/2] drm/i915: panel: Use intel_panel_compute_brightness() from pwm_setup_backlight()

[Jani Nikula]

On Tue, 03 Mar 2020, Hans de Goede <hdegoede at redhat.com> wrote:
> Hi All,
>
> On 2/21/20 6:29 PM, Hans de Goede wrote:
>> Use intel_panel_compute_brightness() from pwm_setup_backlight() so that
>> we correctly take i915_modparams.invert_brightness and/or
>> QUIRK_INVERT_BRIGHTNESS into account when setting + getting the initial
>> brightness value.
>> 
>> Signed-off-by: Hans de Goede <hdegoede at redhat.com>
>
> ping? Any chance I can get a review from someone on this series?
>
> Both patches are pretty trivial really...

For both,

Reviewed-by: Jani Nikula <jani.nikula at intel.com>

And sad trombone, I was hoping I could nuke the whole module parameter
one of these days. It used to be something associated with gen4 only.

BR,
Jani.


>
> Regards,
>
> Hans
>
>
>
>> ---
>>   drivers/gpu/drm/i915/display/intel_panel.c | 18 +++++++++++-------
>>   1 file changed, 11 insertions(+), 7 deletions(-)
>> 
>> diff --git a/drivers/gpu/drm/i915/display/intel_panel.c b/drivers/gpu/drm/i915/display/intel_panel.c
>> index 7b3ec6eb3382..9ebee7d93414 100644
>> --- a/drivers/gpu/drm/i915/display/intel_panel.c
>> +++ b/drivers/gpu/drm/i915/display/intel_panel.c
>> @@ -1843,6 +1843,7 @@ static int pwm_setup_backlight(struct intel_connector *connector,
>>   	struct drm_i915_private *dev_priv = to_i915(dev);
>>   	struct intel_panel *panel = &connector->panel;
>>   	const char *desc;
>> +	u32 level, ns;
>>   	int retval;
>>   
>>   	/* Get the right PWM chip for DSI backlight according to VBT */
>> @@ -1866,8 +1867,12 @@ static int pwm_setup_backlight(struct intel_connector *connector,
>>   	 */
>>   	pwm_apply_args(panel->backlight.pwm);
>>   
>> -	retval = pwm_config(panel->backlight.pwm, CRC_PMIC_PWM_PERIOD_NS,
>> -			    CRC_PMIC_PWM_PERIOD_NS);
>> +	panel->backlight.min = 0; /* 0% */
>> +	panel->backlight.max = 100; /* 100% */
>> +	level = intel_panel_compute_brightness(connector, 100);
>> +	ns = DIV_ROUND_UP(level * CRC_PMIC_PWM_PERIOD_NS, 100);
>> +
>> +	retval = pwm_config(panel->backlight.pwm, ns, CRC_PMIC_PWM_PERIOD_NS);
>>   	if (retval < 0) {
>>   		DRM_ERROR("Failed to configure the pwm chip\n");
>>   		pwm_put(panel->backlight.pwm);
>> @@ -1875,11 +1880,10 @@ static int pwm_setup_backlight(struct intel_connector *connector,
>>   		return retval;
>>   	}
>>   
>> -	panel->backlight.min = 0; /* 0% */
>> -	panel->backlight.max = 100; /* 100% */
>> -	panel->backlight.level = DIV_ROUND_UP(
>> -				 pwm_get_duty_cycle(panel->backlight.pwm) * 100,
>> -				 CRC_PMIC_PWM_PERIOD_NS);
>> +	level = DIV_ROUND_UP(pwm_get_duty_cycle(panel->backlight.pwm) * 100,
>> +			     CRC_PMIC_PWM_PERIOD_NS);
>> +	panel->backlight.level =
>> +		intel_panel_compute_brightness(connector, level);
>>   	panel->backlight.enabled = panel->backlight.level != 0;
>>   
>>   	DRM_INFO("Using %s PWM for LCD backlight control\n", desc);
>> 
>

-- 
Jani Nikula, Intel Open Source Graphics Center