[Intel-gfx] [PATCH v11 06/12] drm/i915: Try to make bigjoiner work in atomic check

Navare, Manasi manasi.d.navare at intel.com
Fri Oct 23 18:13:47 UTC 2020


On Fri, Oct 23, 2020 at 08:42:00PM +0300, Ville Syrjälä wrote:
> On Wed, Oct 21, 2020 at 10:42:17PM -0700, Manasi Navare wrote:
> > From: Maarten Lankhorst <maarten.lankhorst at linux.intel.com>
> > 
> >  When the clock is higher than the dotclock, try with 2 pipes enabled.
> >  If we can enable 2, then we will go into big joiner mode, and steal
> >  the adjacent crtc.
> > 
> >  This only links the crtc's in software, no hardware or plane
> >  programming is done yet. Blobs are also copied from the master's
> >  crtc_state, so it doesn't depend at commit time on the other
> >  crtc_state.
> > 
> > v4:
> > * Fixes in intel_crtc_compute_config (Ville)
> > v3:
> > * Manual Rebase (Manasi)
> >  Changes since v1:
> >  - Rename pipe timings to transcoder timings, as they are now different.
> >   Changes since v2:
> >  - Rework bigjoiner checks; always disable slave when recalculating
> >    master. No need to have a separate bigjoiner pass any more.
> >  - Use pipe_mode instead of transcoder_mode, to clean up the code.
> > 
> > Signed-off-by: Maarten Lankhorst <maarten.lankhorst at linux.intel.com>
> > Signed-off-by: Manasi Navare <manasi.d.navare at intel.com>
> > ---
> >  drivers/gpu/drm/i915/display/intel_display.c  | 181 ++++++++++++++++--
> >  .../drm/i915/display/intel_display_types.h    |   9 +
> >  drivers/gpu/drm/i915/display/intel_dp.c       |  22 ++-
> >  3 files changed, 191 insertions(+), 21 deletions(-)
> > 
> > diff --git a/drivers/gpu/drm/i915/display/intel_display.c b/drivers/gpu/drm/i915/display/intel_display.c
> > index 92cd38964142..ffee6afe4ddb 100644
> > --- a/drivers/gpu/drm/i915/display/intel_display.c
> > +++ b/drivers/gpu/drm/i915/display/intel_display.c
> > @@ -8237,9 +8237,24 @@ static int intel_crtc_compute_config(struct intel_crtc *crtc,
> >  				     struct intel_crtc_state *pipe_config)
> >  {
> >  	struct drm_i915_private *dev_priv = to_i915(crtc->base.dev);
> > -	const struct drm_display_mode *pipe_mode = &pipe_config->hw.pipe_mode;
> > +	struct drm_display_mode *pipe_mode = &pipe_config->hw.pipe_mode;
> >  	int clock_limit = dev_priv->max_dotclk_freq;
> >  
> > +	*pipe_mode = pipe_config->hw.adjusted_mode;
> > +
> > +	/* Adjust pipe_mode for bigjoiner, with half the horizontal mode */
> > +	if (pipe_config->bigjoiner) {
> > +		pipe_mode->crtc_clock /= 2;
> > +		pipe_mode->crtc_hdisplay /= 2;
> > +		pipe_mode->crtc_hblank_start /= 2;
> > +		pipe_mode->crtc_hblank_end /= 2;
> > +		pipe_mode->crtc_hsync_start /= 2;
> > +		pipe_mode->crtc_hsync_end /= 2;
> > +		pipe_mode->crtc_htotal /= 2;
> > +		pipe_mode->crtc_hskew /= 2;
> > +		pipe_config->pipe_src_w /= 2;
> > +	}
> > +
> >  	if (INTEL_GEN(dev_priv) < 4) {
> >  		clock_limit = dev_priv->max_cdclk_freq * 9 / 10;
> >  
> > @@ -8300,7 +8315,7 @@ static int intel_crtc_compute_config(struct intel_crtc *crtc,
> >  	 * WaPruneModeWithIncorrectHsyncOffset:ctg,elk,ilk,snb,ivb,vlv,hsw.
> >  	 */
> >  	if ((INTEL_GEN(dev_priv) > 4 || IS_G4X(dev_priv)) &&
> > -		pipe_mode->crtc_hsync_start == pipe_mode->crtc_hdisplay)
> > +	    pipe_mode->crtc_hsync_start == pipe_mode->crtc_hdisplay)
> >  		return -EINVAL;
> >  
> >  	intel_crtc_compute_pixel_rate(pipe_config);
> > @@ -12657,7 +12672,7 @@ static bool encoders_cloneable(const struct intel_encoder *a,
> >  			  b->cloneable & (1 << a->type));
> >  }
> >  
> > -static bool check_single_encoder_cloning(struct drm_atomic_state *state,
> > +static bool check_single_encoder_cloning(struct intel_atomic_state *state,
> >  					 struct intel_crtc *crtc,
> >  					 struct intel_encoder *encoder)
> >  {
> > @@ -12666,7 +12681,7 @@ static bool check_single_encoder_cloning(struct drm_atomic_state *state,
> >  	struct drm_connector_state *connector_state;
> >  	int i;
> >  
> > -	for_each_new_connector_in_state(state, connector, connector_state, i) {
> > +	for_each_new_connector_in_state(&state->base, connector, connector_state, i) {
> 
> There's still this extra noise in the patch. I thought you were going
> to split out the calling convention changes to reduce it?

Hmm I split the calling convention changes that were adding from_crtc_state into a separate patch
May be I will split this one out too in a diff patch?


> 
> >  		if (connector_state->crtc != &crtc->base)
> >  			continue;
> >  
> > @@ -12906,6 +12921,7 @@ static int intel_crtc_atomic_check(struct intel_atomic_state *state,
> >  
> >  	if (mode_changed && crtc_state->hw.enable &&
> >  	    dev_priv->display.crtc_compute_clock &&
> > +	    !crtc_state->bigjoiner_slave &&
> >  	    !drm_WARN_ON(&dev_priv->drm, crtc_state->shared_dpll)) {
> >  		ret = dev_priv->display.crtc_compute_clock(crtc, crtc_state);
> >  		if (ret)
> > @@ -13447,6 +13463,15 @@ intel_crtc_copy_uapi_to_hw_state_nomodeset(struct intel_atomic_state *state,
> >  {
> >  	const struct intel_crtc_state *from_crtc_state = crtc_state;
> >  
> > +	if (crtc_state->bigjoiner_slave) {
> > +		from_crtc_state = intel_atomic_get_new_crtc_state(state,
> > +								  crtc_state->bigjoiner_linked_crtc);
> > +
> > +		/* No need to copy state if the master state is unchanged */
> > +		if (!from_crtc_state)
> > +			return;
> > +	}
> > +
> >  	intel_crtc_copy_color_blobs(crtc_state, from_crtc_state);
> >  }
> >  
> > @@ -13482,6 +13507,47 @@ static void intel_crtc_copy_hw_to_uapi_state(struct intel_crtc_state *crtc_state
> >  				  crtc_state->hw.ctm);
> >  }
> >  
> > +static int
> > +copy_bigjoiner_crtc_state(struct intel_crtc_state *crtc_state,
> > +			  const struct intel_crtc_state *from_crtc_state)
> > +{
> > +	struct intel_crtc_state *saved_state;
> > +	struct intel_crtc *crtc = to_intel_crtc(crtc_state->uapi.crtc);
> > +
> > +	saved_state = kmemdup(from_crtc_state, sizeof(*saved_state), GFP_KERNEL);
> > +	if (!saved_state)
> > +		return -ENOMEM;
> > +
> > +	saved_state->uapi = crtc_state->uapi;
> > +	saved_state->scaler_state = crtc_state->scaler_state;
> > +	saved_state->shared_dpll = crtc_state->shared_dpll;
> > +	saved_state->dpll_hw_state = crtc_state->dpll_hw_state;
> > +	saved_state->crc_enabled = crtc_state->crc_enabled;
> > +
> > +	intel_crtc_free_hw_state(crtc_state);
> > +	memcpy(crtc_state, saved_state, sizeof(*crtc_state));
> > +	kfree(saved_state);
> > +
> > +	/* Re-init hw state */
> > +	memset(&crtc_state->hw, 0, sizeof(saved_state->hw));
> > +	crtc_state->hw.enable = from_crtc_state->hw.enable;
> > +	crtc_state->hw.active = from_crtc_state->hw.active;
> > +	crtc_state->hw.pipe_mode = from_crtc_state->hw.pipe_mode;
> > +	crtc_state->hw.adjusted_mode = from_crtc_state->hw.adjusted_mode;
> > +
> > +	/* Some fixups */
> > +	crtc_state->uapi.mode_changed = from_crtc_state->uapi.mode_changed;
> > +	crtc_state->uapi.connectors_changed = from_crtc_state->uapi.connectors_changed;
> > +	crtc_state->uapi.active_changed = from_crtc_state->uapi.active_changed;
> > +	crtc_state->nv12_planes = crtc_state->c8_planes = crtc_state->update_planes = 0;
> > +	crtc_state->bigjoiner_linked_crtc = to_intel_crtc(from_crtc_state->uapi.crtc);
> > +	crtc_state->bigjoiner_slave = true;
> > +	crtc_state->cpu_transcoder = (enum transcoder)crtc->pipe;
> > +	crtc_state->has_audio = false;
> > +
> > +	return 0;
> > +}
> > +
> >  static int
> >  intel_crtc_prepare_cleared_state(struct intel_atomic_state *state,
> >  				 struct intel_crtc_state *crtc_state)
> > @@ -13522,10 +13588,10 @@ intel_crtc_prepare_cleared_state(struct intel_atomic_state *state,
> >  }
> >  
> >  static int
> > -intel_modeset_pipe_config(struct intel_crtc_state *pipe_config)
> > +intel_modeset_pipe_config(struct intel_atomic_state *state,
> > +			  struct intel_crtc_state *pipe_config)
> >  {
> >  	struct drm_crtc *crtc = pipe_config->uapi.crtc;
> > -	struct drm_atomic_state *state = pipe_config->uapi.state;
> >  	struct drm_i915_private *i915 = to_i915(pipe_config->uapi.crtc->dev);
> >  	struct drm_connector *connector;
> >  	struct drm_connector_state *connector_state;
> > @@ -13567,7 +13633,7 @@ intel_modeset_pipe_config(struct intel_crtc_state *pipe_config)
> >  			       &pipe_config->pipe_src_w,
> >  			       &pipe_config->pipe_src_h);
> >  
> > -	for_each_new_connector_in_state(state, connector, connector_state, i) {
> > +	for_each_new_connector_in_state(&state->base, connector, connector_state, i) {
> >  		struct intel_encoder *encoder =
> >  			to_intel_encoder(connector_state->best_encoder);
> >  
> > @@ -13605,7 +13671,7 @@ intel_modeset_pipe_config(struct intel_crtc_state *pipe_config)
> >  	 * adjust it according to limitations or connector properties, and also
> >  	 * a chance to reject the mode entirely.
> >  	 */
> > -	for_each_new_connector_in_state(state, connector, connector_state, i) {
> > +	for_each_new_connector_in_state(&state->base, connector, connector_state, i) {
> >  		struct intel_encoder *encoder =
> >  			to_intel_encoder(connector_state->best_encoder);
> >  
> > @@ -13657,9 +13723,6 @@ intel_modeset_pipe_config(struct intel_crtc_state *pipe_config)
> >  		    "hw max bpp: %i, pipe bpp: %i, dithering: %i\n",
> >  		    base_bpp, pipe_config->pipe_bpp, pipe_config->dither);
> >  
> > -	/* without bigjoiner, pipe_mode == adjusted_mode */
> > -	pipe_config->hw.pipe_mode = pipe_config->hw.adjusted_mode;
> > -
> >  	return 0;
> >  }
> >  
> > @@ -15055,6 +15118,75 @@ static bool intel_cpu_transcoders_need_modeset(struct intel_atomic_state *state,
> >  	return false;
> >  }
> >  
> > +static int intel_atomic_check_bigjoiner(struct intel_atomic_state *state,
> > +					struct intel_crtc *crtc,
> > +					struct intel_crtc_state *old_crtc_state,
> > +					struct intel_crtc_state *new_crtc_state)
> > +{
> > +	struct drm_i915_private *dev_priv = to_i915(state->base.dev);
> > +	struct intel_crtc_state *slave_crtc_state, *master_crtc_state;
> > +	struct intel_crtc *slave, *master;
> > +
> > +	/* slave being enabled, is master is still claiming this crtc? */
> > +	if (old_crtc_state->bigjoiner_slave) {
> > +		slave = crtc;
> > +		master = old_crtc_state->bigjoiner_linked_crtc;
> > +		master_crtc_state = intel_atomic_get_new_crtc_state(state, master);
> > +		if (!master_crtc_state || !needs_modeset(master_crtc_state))
> > +			goto claimed;
> > +	}
> > +
> > +	if (!new_crtc_state->bigjoiner)
> > +		return 0;
> > +
> > +	if (1 + crtc->pipe >= INTEL_NUM_PIPES(dev_priv)) {
> > +		DRM_DEBUG_KMS("[CRTC:%d:%s] Big joiner configuration requires "
> > +			      "CRTC + 1 to be used, doesn't exist\n",
> > +			      crtc->base.base.id, crtc->base.name);
> > +		return -EINVAL;
> > +	}
> > +
> > +	slave = new_crtc_state->bigjoiner_linked_crtc =
> > +		intel_get_crtc_for_pipe(dev_priv, crtc->pipe + 1);
> > +	slave_crtc_state = intel_atomic_get_crtc_state(&state->base, slave);
> > +	master = crtc;
> > +	if (IS_ERR(slave_crtc_state))
> > +		return PTR_ERR(slave_crtc_state);
> > +
> > +	/* master being enabled, slave was already configured? */
> > +	if (slave_crtc_state->uapi.enable)
> > +		goto claimed;
> > +
> > +	DRM_DEBUG_KMS("[CRTC:%d:%s] Used as slave for big joiner\n",
> > +		      slave->base.base.id, slave->base.name);
> > +
> > +	return copy_bigjoiner_crtc_state(slave_crtc_state, new_crtc_state);
> > +
> > +claimed:
> > +	DRM_DEBUG_KMS("[CRTC:%d:%s] Slave is enabled as normal CRTC, but "
> > +		      "[CRTC:%d:%s] claiming this CRTC for bigjoiner.\n",
> > +		      slave->base.base.id, slave->base.name,
> > +		      master->base.base.id, master->base.name);
> > +	return -EINVAL;
> > +}
> > +
> > +static int kill_bigjoiner_slave(struct intel_atomic_state *state,
> > +				struct intel_crtc_state *master_crtc_state)
> > +{
> > +	struct intel_crtc_state *slave_crtc_state =
> > +			intel_atomic_get_crtc_state(&state->base,
> > +						    master_crtc_state->bigjoiner_linked_crtc);
> > +
> > +		if (IS_ERR(slave_crtc_state))
> > +			return PTR_ERR(slave_crtc_state);
> > +
> > +		slave_crtc_state->bigjoiner = master_crtc_state->bigjoiner = false;
> > +		slave_crtc_state->bigjoiner_slave = master_crtc_state->bigjoiner_slave = false;
> > +		slave_crtc_state->bigjoiner_linked_crtc = master_crtc_state->bigjoiner_linked_crtc = NULL;
> > +		intel_crtc_copy_uapi_to_hw_state(state, slave_crtc_state);
> > +		return 0;
> > +}
> > +
> >  /**
> >   * DOC: asynchronous flip implementation
> >   *
> > @@ -15222,14 +15354,31 @@ static int intel_atomic_check(struct drm_device *dev,
> >  			continue;
> >  		}
> >  
> > +		/* Kill old bigjoiner link, we may re-establish afterwards */
> > +		if (old_crtc_state->bigjoiner && !old_crtc_state->bigjoiner_slave) {
> > +			ret = kill_bigjoiner_slave(state, new_crtc_state);
> > +			if (ret)
> > +				goto fail;
> > +		}
> > +
> > +		if (!new_crtc_state->uapi.enable) {
> > +			if (!new_crtc_state->bigjoiner_slave) {
> > +				intel_crtc_copy_uapi_to_hw_state(state, new_crtc_state);
> > +				any_ms = true;
> > +			}
> > +			continue;
> > +		}
> > +
> >  		ret = intel_crtc_prepare_cleared_state(state, new_crtc_state);
> >  		if (ret)
> >  			goto fail;
> >  
> > -		if (!new_crtc_state->hw.enable)
> > -			continue;
> > +		ret = intel_modeset_pipe_config(state, new_crtc_state);
> > +		if (ret)
> > +			goto fail;
> >  
> > -		ret = intel_modeset_pipe_config(new_crtc_state);
> > +		ret = intel_atomic_check_bigjoiner(state, crtc, old_crtc_state,
> > +						   new_crtc_state);
> >  		if (ret)
> >  			goto fail;
> >  	}
> > @@ -15567,7 +15716,9 @@ static void intel_update_crtc(struct intel_atomic_state *state,
> >  
> >  	commit_pipe_config(state, crtc);
> >  
> > -	if (INTEL_GEN(dev_priv) >= 9)
> > +	if (new_crtc_state->bigjoiner) {
> > +	/* Not supported yet */
> > +	} else if (INTEL_GEN(dev_priv) >= 9)
> >  		skl_update_planes_on_crtc(state, crtc);
> >  	else
> >  		i9xx_update_planes_on_crtc(state, crtc);
> > diff --git a/drivers/gpu/drm/i915/display/intel_display_types.h b/drivers/gpu/drm/i915/display/intel_display_types.h
> > index b526afee595c..59ed94d68b55 100644
> > --- a/drivers/gpu/drm/i915/display/intel_display_types.h
> > +++ b/drivers/gpu/drm/i915/display/intel_display_types.h
> > @@ -1070,6 +1070,15 @@ struct intel_crtc_state {
> >  	/* enable pipe csc? */
> >  	bool csc_enable;
> >  
> > +	/* enable pipe big joiner? */
> > +	bool bigjoiner;
> > +
> > +	/* big joiner slave crtc? */
> > +	bool bigjoiner_slave;
> > +
> > +	/* linked crtc for bigjoiner, either slave or master */
> > +	struct intel_crtc *bigjoiner_linked_crtc;
> > +
> >  	/* Display Stream compression state */
> >  	struct {
> >  		bool compression_enable;
> > diff --git a/drivers/gpu/drm/i915/display/intel_dp.c b/drivers/gpu/drm/i915/display/intel_dp.c
> > index d123e5a508c1..cb604899a881 100644
> > --- a/drivers/gpu/drm/i915/display/intel_dp.c
> > +++ b/drivers/gpu/drm/i915/display/intel_dp.c
> > @@ -2349,6 +2349,15 @@ static int intel_dp_dsc_compute_config(struct intel_dp *intel_dp,
> >  	pipe_config->port_clock = intel_dp->common_rates[limits->max_clock];
> >  	pipe_config->lane_count = limits->max_lane_count;
> >  
> > +	if (adjusted_mode->crtc_clock > intel_dp_max_dotclock(intel_dp, false)) {
> > +		if (adjusted_mode->crtc_clock > intel_dp_max_dotclock(intel_dp, true)) {
> > +			DRM_DEBUG_KMS("Clock rate too high for big joiner\n");
> > +			return -EINVAL;
> > +		}
> 
> That second check is redundant I think. intel_crtc_compute_config()
> already takes care of it.

Why is it redundant? I mean with bigjoiner = true we still need to make sure
that crtc_clock is not > max dotclock with bigjoiner right?

> 
> So seems like we should be good with just something super simple like:
> 
> if (crtc_clock > dev_priv->max_dotclock && can_bigjoiner())
> 	bigjoiner = true;

Manasi

> 
> 
> > +		pipe_config->bigjoiner = true;
> > +		DRM_DEBUG_KMS("Using bigjoiner configuration\n");
> > +	}
> > +
> >  	if (intel_dp_is_edp(intel_dp)) {
> >  		pipe_config->dsc.compressed_bpp =
> >  			min_t(u16, drm_edp_dsc_sink_output_bpp(intel_dp->dsc_dpcd) >> 4,
> > @@ -2366,12 +2375,12 @@ static int intel_dp_dsc_compute_config(struct intel_dp *intel_dp,
> >  						    pipe_config->lane_count,
> >  						    adjusted_mode->crtc_clock,
> >  						    adjusted_mode->crtc_hdisplay,
> > -						    false);
> > +						    pipe_config->bigjoiner);
> >  		dsc_dp_slice_count =
> >  			intel_dp_dsc_get_slice_count(intel_dp,
> >  						     adjusted_mode->crtc_clock,
> >  						     adjusted_mode->crtc_hdisplay,
> > -						     false);
> > +						     pipe_config->bigjoiner);
> >  		if (!dsc_max_output_bpp || !dsc_dp_slice_count) {
> >  			drm_dbg_kms(&dev_priv->drm,
> >  				    "Compressed BPP/Slice Count not supported\n");
> > @@ -2387,14 +2396,15 @@ static int intel_dp_dsc_compute_config(struct intel_dp *intel_dp,
> >  	 * is greater than the maximum Cdclock and if slice count is even
> >  	 * then we need to use 2 VDSC instances.
> >  	 */
> > -	if (adjusted_mode->crtc_clock > dev_priv->max_cdclk_freq) {
> > -		if (pipe_config->dsc.slice_count > 1) {
> > -			pipe_config->dsc.dsc_split = true;
> > -		} else {
> > +	if (adjusted_mode->crtc_clock > dev_priv->max_cdclk_freq ||
> > +	    pipe_config->bigjoiner) {
> > +		if (pipe_config->dsc.slice_count < 2) {
> >  			drm_dbg_kms(&dev_priv->drm,
> >  				    "Cannot split stream to use 2 VDSC instances\n");
> >  			return -EINVAL;
> >  		}
> > +
> > +		pipe_config->dsc.dsc_split = true;
> >  	}
> >  
> >  	ret = intel_dp_dsc_compute_params(&dig_port->base, pipe_config);
> > -- 
> > 2.19.1
> > 
> > _______________________________________________
> > Intel-gfx mailing list
> > Intel-gfx at lists.freedesktop.org
> > https://lists.freedesktop.org/mailman/listinfo/intel-gfx
> 
> -- 
> Ville Syrjälä
> Intel


More information about the Intel-gfx mailing list