[Intel-gfx] [PATCH 8/8] drm/i915: Say "enable foo" instead of "set foo to enabled"

[Ville Syrjala]

From: Ville Syrjälä <ville.syrjala at linux.intel.com>

Use simpler sentences. Just say "enable foo" instead
of "set foo to enabled" etc.

Signed-off-by: Ville Syrjälä <ville.syrjala at linux.intel.com>
---
 drivers/gpu/drm/i915/display/intel_dp.c | 12 ++++++------
 drivers/gpu/drm/i915/display/intel_tc.c |  4 ++--
 2 files changed, 8 insertions(+), 8 deletions(-)

diff --git a/drivers/gpu/drm/i915/display/intel_dp.c b/drivers/gpu/drm/i915/display/intel_dp.c
index 44109a4b69aa..52ea09fc5e70 100644
--- a/drivers/gpu/drm/i915/display/intel_dp.c
+++ b/drivers/gpu/drm/i915/display/intel_dp.c
@@ -2293,8 +2293,8 @@ void intel_dp_configure_protocol_converter(struct intel_dp *intel_dp,
 
 	if (drm_dp_dpcd_writeb(&intel_dp->aux,
 			       DP_PROTOCOL_CONVERTER_CONTROL_0, tmp) != 1)
-		drm_dbg_kms(&i915->drm, "Failed to set protocol converter HDMI mode to %s\n",
-			    enableddisabled(intel_dp->has_hdmi_sink));
+		drm_dbg_kms(&i915->drm, "Failed to %s protocol converter HDMI mode\n",
+			    enabledisable(intel_dp->has_hdmi_sink));
 
 	tmp = crtc_state->output_format == INTEL_OUTPUT_FORMAT_YCBCR444 &&
 		intel_dp->dfp.ycbcr_444_to_420 ? DP_CONVERSION_TO_YCBCR420_ENABLE : 0;
@@ -2302,8 +2302,8 @@ void intel_dp_configure_protocol_converter(struct intel_dp *intel_dp,
 	if (drm_dp_dpcd_writeb(&intel_dp->aux,
 			       DP_PROTOCOL_CONVERTER_CONTROL_1, tmp) != 1)
 		drm_dbg_kms(&i915->drm,
-			    "Failed to set protocol converter YCbCr 4:2:0 conversion mode to %s\n",
-			    enableddisabled(intel_dp->dfp.ycbcr_444_to_420));
+			    "Failed to %s protocol converter YCbCr 4:2:0 conversion mode\n",
+			    enabledisable(intel_dp->dfp.ycbcr_444_to_420));
 
 	tmp = 0;
 	if (intel_dp->dfp.rgb_to_ycbcr) {
@@ -2340,8 +2340,8 @@ void intel_dp_configure_protocol_converter(struct intel_dp *intel_dp,
 
 	if (drm_dp_pcon_convert_rgb_to_ycbcr(&intel_dp->aux, tmp) < 0)
 		drm_dbg_kms(&i915->drm,
-			   "Failed to set protocol converter RGB->YCbCr conversion mode to %s\n",
-			   enableddisabled(tmp ? true : false));
+			   "Failed to %s protocol converter RGB->YCbCr conversion mode\n",
+			   enabledisable(tmp));
 }
 
 
diff --git a/drivers/gpu/drm/i915/display/intel_tc.c b/drivers/gpu/drm/i915/display/intel_tc.c
index 88085486ee59..59de6ca436db 100644
--- a/drivers/gpu/drm/i915/display/intel_tc.c
+++ b/drivers/gpu/drm/i915/display/intel_tc.c
@@ -267,8 +267,8 @@ static bool icl_tc_phy_set_safe_mode(struct intel_digital_port *dig_port,
 				PORT_TX_DFLEXDPCSSS(dig_port->tc_phy_fia));
 	if (val == 0xffffffff) {
 		drm_dbg_kms(&i915->drm,
-			    "Port %s: PHY in TCCOLD, can't set safe-mode to %s\n",
-			    dig_port->tc_port_name, enableddisabled(enable));
+			    "Port %s: PHY in TCCOLD, can't %s safe-mode\n",
+			    dig_port->tc_port_name, enabledisable(enable));
 
 		return false;
 	}
-- 
2.26.3