[Intel-gfx] [PATCH v5 3/3] drm/i915/hdcp: reuse rx_info for mst stream type1 capability check
Gupta, Anshuman
anshuman.gupta at intel.com
Wed Aug 18 11:51:52 UTC 2021
> -----Original Message-----
> From: Li, Juston <juston.li at intel.com>
> Sent: Friday, August 13, 2021 12:14 AM
> To: intel-gfx at lists.freedesktop.org
> Cc: seanpaul at chromium.org; Gupta, Anshuman <anshuman.gupta at intel.com>;
> C, Ramalingam <ramalingam.c at intel.com>; Vivi, Rodrigo
> <rodrigo.vivi at intel.com>; Li, Juston <juston.li at intel.com>
> Subject: [Intel-gfx] [PATCH v5 3/3] drm/i915/hdcp: reuse rx_info for mst stream
> type1 capability check
>
> On some MST docking stations, rx_info can only be read after
> RepeaterAuth_Send_ReceiverID_List and the RxStatus READY bit is set otherwise
> the read will return -EIO.
>
> This behavior causes the mst stream type1 capability test to fail to read rx_info
> and determine if the topology supports type1 and fallback to type0.
>
> To fix this, check for type1 capability when we receive rx_info within the AKE
> flow when we read RepeaterAuth_Send_ReceiverID_List instead of an explicit
> read just for type1 capability checking.
>
> This does require moving where we set stream_types to after
> hdcp2_authenticate_sink() when we get rx_info but this occurs before we do
> hdcp2_propagate_stream_management_info.
>
> Also, legacy HDCP 2.0/2.1 are not type 1 capable either so check for that as
> well.
>
> Changes since v4:
> - move topology_type1_capable to intel_digital_port and rename it as
> hdcp_mst_type1_capable (Anshuman)
> - make a helper function intel_set_stream_types() to set stream types
> in hdcp2_authenticate_and_encrypt() (Anshuman)
> - break on failure to set stream types and retry instead of returning
> - remove no longer used declaration for streams_type1_capable()
>
> Changes since v2:
> - Remove no longer used variables in _intel_hdcp2_enable()
>
> Signed-off-by: Juston Li <juston.li at intel.com>
> Reviewed-by: Ramalingam C <ramalingam.c at intel.com>
> ---
> .../drm/i915/display/intel_display_types.h | 6 +-
> drivers/gpu/drm/i915/display/intel_dp_hdcp.c | 39 -----------
> drivers/gpu/drm/i915/display/intel_hdcp.c | 64 +++++++++++--------
> 3 files changed, 38 insertions(+), 71 deletions(-)
>
> diff --git a/drivers/gpu/drm/i915/display/intel_display_types.h
> b/drivers/gpu/drm/i915/display/intel_display_types.h
> index dbdfe54d0340..1f85ff344ab7 100644
> --- a/drivers/gpu/drm/i915/display/intel_display_types.h
> +++ b/drivers/gpu/drm/i915/display/intel_display_types.h
> @@ -428,10 +428,6 @@ struct intel_hdcp_shim {
> int (*hdcp_2_2_capable)(struct intel_digital_port *dig_port,
> bool *capable);
>
> - /* Detects whether a HDCP 1.4 sink connected in MST topology */
> - int (*streams_type1_capable)(struct intel_connector *connector,
> - bool *capable);
> -
> /* Write HDCP2.2 messages */
> int (*write_2_2_msg)(struct intel_digital_port *dig_port,
> void *buf, size_t size);
> @@ -1684,6 +1680,8 @@ struct intel_digital_port {
> bool hdcp_auth_status;
> /* HDCP port data need to pass to security f/w */
> struct hdcp_port_data hdcp_port_data;
> + /* Whether the MST topology supports HDCP Type 1 Content */
> + bool hdcp_mst_type1_capable;
>
> void (*write_infoframe)(struct intel_encoder *encoder,
> const struct intel_crtc_state *crtc_state, diff --
> git a/drivers/gpu/drm/i915/display/intel_dp_hdcp.c
> b/drivers/gpu/drm/i915/display/intel_dp_hdcp.c
> index fbfb3c4d16bb..540a669e01dd 100644
> --- a/drivers/gpu/drm/i915/display/intel_dp_hdcp.c
> +++ b/drivers/gpu/drm/i915/display/intel_dp_hdcp.c
> @@ -478,23 +478,6 @@ int intel_dp_hdcp2_write_msg(struct intel_digital_port
> *dig_port,
> return size;
> }
>
> -static int
> -get_rxinfo_hdcp_1_dev_downstream(struct intel_digital_port *dig_port, bool
> *hdcp_1_x) -{
> - u8 rx_info[HDCP_2_2_RXINFO_LEN];
> - int ret;
> -
> - ret = drm_dp_dpcd_read(&dig_port->dp.aux,
> - DP_HDCP_2_2_REG_RXINFO_OFFSET,
> - (void *)rx_info, HDCP_2_2_RXINFO_LEN);
> -
> - if (ret != HDCP_2_2_RXINFO_LEN)
> - return ret >= 0 ? -EIO : ret;
> -
> - *hdcp_1_x = HDCP_2_2_HDCP1_DEVICE_CONNECTED(rx_info[1]) ? true
> : false;
> - return 0;
> -}
> -
> static
> ssize_t get_receiver_id_list_rx_info(struct intel_digital_port *dig_port, u32
> *dev_cnt, u8 *byte) { @@ -665,27 +648,6 @@ int
> intel_dp_hdcp2_capable(struct intel_digital_port *dig_port,
> return 0;
> }
>
> -static
> -int intel_dp_mst_streams_type1_capable(struct intel_connector *connector,
> - bool *capable)
> -{
> - struct intel_digital_port *dig_port =
> intel_attached_dig_port(connector);
> - struct drm_i915_private *i915 = to_i915(dig_port->base.base.dev);
> - int ret;
> - bool hdcp_1_x;
> -
> - ret = get_rxinfo_hdcp_1_dev_downstream(dig_port, &hdcp_1_x);
> - if (ret) {
> - drm_dbg_kms(&i915->drm,
> - "[%s:%d] failed to read RxInfo ret=%d\n",
> - connector->base.name, connector->base.base.id,
> ret);
> - return ret;
> - }
> -
> - *capable = !hdcp_1_x;
> - return 0;
> -}
> -
> static const struct intel_hdcp_shim intel_dp_hdcp_shim = {
> .write_an_aksv = intel_dp_hdcp_write_an_aksv,
> .read_bksv = intel_dp_hdcp_read_bksv,
> @@ -834,7 +796,6 @@ static const struct intel_hdcp_shim
> intel_dp_mst_hdcp_shim = {
> .stream_2_2_encryption = intel_dp_mst_hdcp2_stream_encryption,
> .check_2_2_link = intel_dp_mst_hdcp2_check_link,
> .hdcp_2_2_capable = intel_dp_hdcp2_capable,
> - .streams_type1_capable = intel_dp_mst_streams_type1_capable,
> .protocol = HDCP_PROTOCOL_DP,
> };
>
> diff --git a/drivers/gpu/drm/i915/display/intel_hdcp.c
> b/drivers/gpu/drm/i915/display/intel_hdcp.c
> index ebc2e32aec0b..f21fcfd2d477 100644
> --- a/drivers/gpu/drm/i915/display/intel_hdcp.c
> +++ b/drivers/gpu/drm/i915/display/intel_hdcp.c
> @@ -33,21 +33,6 @@ static int intel_conn_to_vcpi(struct intel_connector
> *connector)
> return connector->port ? connector->port->vcpi.vcpi : 0;
> }
>
> -static bool
> -intel_streams_type1_capable(struct intel_connector *connector) -{
> - const struct intel_hdcp_shim *shim = connector->hdcp.shim;
> - bool capable = false;
> -
> - if (!shim)
> - return capable;
> -
> - if (shim->streams_type1_capable)
> - shim->streams_type1_capable(connector, &capable);
> -
> - return capable;
> -}
> -
> /*
> * intel_hdcp_required_content_stream selects the most highest common
> possible HDCP
> * content_type for all streams in DP MST topology because security f/w doesn't
> @@ -86,7 +71,7 @@ intel_hdcp_required_content_stream(struct
> intel_digital_port *dig_port)
> if (conn_dig_port != dig_port)
> continue;
>
> - if (!enforce_type0 &&
> !intel_streams_type1_capable(connector))
> + if (!enforce_type0 && !dig_port->hdcp_mst_type1_capable)
> enforce_type0 = true;
>
> data->streams[data->k].stream_id =
> intel_conn_to_vcpi(connector); @@ -112,6 +97,25 @@
> intel_hdcp_required_content_stream(struct intel_digital_port *dig_port)
> return 0;
> }
>
> +static int intel_set_stream_type(struct intel_connector *connector) {
IMO intel_hdcp_prepare_streams would be more suitable.
With above,
Reviewed-by: Anshuman Gupta <anshuman.gupta at intel.com>
> + struct intel_digital_port *dig_port =
> intel_attached_dig_port(connector);
> + struct hdcp_port_data *data = &dig_port->hdcp_port_data;
> + struct intel_hdcp *hdcp = &connector->hdcp;
> + int ret;
> +
> + if (!intel_encoder_is_mst(intel_attached_encoder(connector))) {
> + data->k = 1;
> + data->streams[0].stream_type = hdcp->content_type;
> + } else {
> + ret = intel_hdcp_required_content_stream(dig_port);
> + if (ret)
> + return ret;
> + }
> +
> + return 0;
> +}
> +
> static
> bool intel_hdcp_is_ksv_valid(u8 *ksv)
> {
> @@ -1632,6 +1636,14 @@ int hdcp2_authenticate_repeater_topology(struct
> intel_connector *connector)
> return -EINVAL;
> }
>
> + /*
> + * MST topology is not Type 1 capable if it contains a downstream
> + * device that is only HDCP 1.x or Legacy HDCP 2.0/2.1 compliant.
> + */
> + dig_port->hdcp_mst_type1_capable =
> + !HDCP_2_2_HDCP1_DEVICE_CONNECTED(rx_info[1]) &&
> + !HDCP_2_2_HDCP_2_0_REP_CONNECTED(rx_info[1]);
> +
> /* Converting and Storing the seq_num_v to local variable as DWORD */
> seq_num_v =
> drm_hdcp_be24_to_cpu((const u8
> *)msgs.recvid_list.seq_num_v); @@ -1876,6 +1888,14 @@ static int
> hdcp2_authenticate_and_encrypt(struct intel_connector *connector)
> for (i = 0; i < tries && !dig_port->hdcp_auth_status; i++) {
> ret = hdcp2_authenticate_sink(connector);
> if (!ret) {
> + ret = intel_set_stream_type(connector);
> + if (ret) {
> + drm_dbg_kms(&i915->drm,
> + "Set stream type failed.(%d)\n",
> + ret);
> + break;
> + }
> +
> ret =
> hdcp2_propagate_stream_management_info(connector);
> if (ret) {
> drm_dbg_kms(&i915->drm,
> @@ -1921,9 +1941,7 @@ static int hdcp2_authenticate_and_encrypt(struct
> intel_connector *connector)
>
> static int _intel_hdcp2_enable(struct intel_connector *connector) {
> - struct intel_digital_port *dig_port =
> intel_attached_dig_port(connector);
> struct drm_i915_private *i915 = to_i915(connector->base.dev);
> - struct hdcp_port_data *data = &dig_port->hdcp_port_data;
> struct intel_hdcp *hdcp = &connector->hdcp;
> int ret;
>
> @@ -1931,16 +1949,6 @@ static int _intel_hdcp2_enable(struct
> intel_connector *connector)
> connector->base.name, connector->base.base.id,
> hdcp->content_type);
>
> - /* Stream which requires encryption */
> - if (!intel_encoder_is_mst(intel_attached_encoder(connector))) {
> - data->k = 1;
> - data->streams[0].stream_type = hdcp->content_type;
> - } else {
> - ret = intel_hdcp_required_content_stream(dig_port);
> - if (ret)
> - return ret;
> - }
> -
> ret = hdcp2_authenticate_and_encrypt(connector);
> if (ret) {
> drm_dbg_kms(&i915->drm, "HDCP2 Type%d Enabling Failed.
> (%d)\n",
> --
> 2.31.1
More information about the Intel-gfx
mailing list