[Intel-gfx] [PATCH v5 3/3] drm/i915/hdcp: reuse rx_info for mst stream type1 capability check
Li, Juston
juston.li at intel.com
Thu Aug 19 18:53:25 UTC 2021
On Wed, 2021-08-18 at 11:51 +0000, Gupta, Anshuman wrote:
>
>
> > -----Original Message-----
> > From: Li, Juston <juston.li at intel.com>
> > Sent: Friday, August 13, 2021 12:14 AM
> > To: intel-gfx at lists.freedesktop.org
> > Cc: seanpaul at chromium.org; Gupta, Anshuman <
> > anshuman.gupta at intel.com>;
> > C, Ramalingam <ramalingam.c at intel.com>; Vivi, Rodrigo
> > <rodrigo.vivi at intel.com>; Li, Juston <juston.li at intel.com>
> > Subject: [Intel-gfx] [PATCH v5 3/3] drm/i915/hdcp: reuse rx_info
> > for mst stream
> > type1 capability check
> >
> > On some MST docking stations, rx_info can only be read after
> > RepeaterAuth_Send_ReceiverID_List and the RxStatus READY bit is set
> > otherwise
> > the read will return -EIO.
> >
> > This behavior causes the mst stream type1 capability test to fail
> > to read rx_info
> > and determine if the topology supports type1 and fallback to type0.
> >
> > To fix this, check for type1 capability when we receive rx_info
> > within the AKE
> > flow when we read RepeaterAuth_Send_ReceiverID_List instead of an
> > explicit
> > read just for type1 capability checking.
> >
> > This does require moving where we set stream_types to after
> > hdcp2_authenticate_sink() when we get rx_info but this occurs
> > before we do
> > hdcp2_propagate_stream_management_info.
> >
> > Also, legacy HDCP 2.0/2.1 are not type 1 capable either so check
> > for that as
> > well.
> >
> > Changes since v4:
> > - move topology_type1_capable to intel_digital_port and rename it
> > as
> > hdcp_mst_type1_capable (Anshuman)
> > - make a helper function intel_set_stream_types() to set stream
> > types
> > in hdcp2_authenticate_and_encrypt() (Anshuman)
> > - break on failure to set stream types and retry instead of
> > returning
> > - remove no longer used declaration for streams_type1_capable()
> >
> > Changes since v2:
> > - Remove no longer used variables in _intel_hdcp2_enable()
> >
> > Signed-off-by: Juston Li <juston.li at intel.com>
> > Reviewed-by: Ramalingam C <ramalingam.c at intel.com>
> > ---
> > .../drm/i915/display/intel_display_types.h | 6 +-
> > drivers/gpu/drm/i915/display/intel_dp_hdcp.c | 39 -----------
> > drivers/gpu/drm/i915/display/intel_hdcp.c | 64 +++++++++++----
> > ----
> > 3 files changed, 38 insertions(+), 71 deletions(-)
> >
> > diff --git a/drivers/gpu/drm/i915/display/intel_display_types.h
> > b/drivers/gpu/drm/i915/display/intel_display_types.h
> > index dbdfe54d0340..1f85ff344ab7 100644
> > --- a/drivers/gpu/drm/i915/display/intel_display_types.h
> > +++ b/drivers/gpu/drm/i915/display/intel_display_types.h
> > @@ -428,10 +428,6 @@ struct intel_hdcp_shim {
> > int (*hdcp_2_2_capable)(struct intel_digital_port *dig_port,
> > bool *capable);
> >
> > -/* Detects whether a HDCP 1.4 sink connected in MST topology */
> > -int (*streams_type1_capable)(struct intel_connector *connector,
> > - bool *capable);
> > -
> > /* Write HDCP2.2 messages */
> > int (*write_2_2_msg)(struct intel_digital_port *dig_port,
> > void *buf, size_t size);
> > @@ -1684,6 +1680,8 @@ struct intel_digital_port {
> > bool hdcp_auth_status;
> > /* HDCP port data need to pass to security f/w */
> > struct hdcp_port_data hdcp_port_data;
> > +/* Whether the MST topology supports HDCP Type 1 Content */
> > +bool hdcp_mst_type1_capable;
> >
> > void (*write_infoframe)(struct intel_encoder *encoder,
> > const struct intel_crtc_state *crtc_state, diff --
> > git a/drivers/gpu/drm/i915/display/intel_dp_hdcp.c
> > b/drivers/gpu/drm/i915/display/intel_dp_hdcp.c
> > index fbfb3c4d16bb..540a669e01dd 100644
> > --- a/drivers/gpu/drm/i915/display/intel_dp_hdcp.c
> > +++ b/drivers/gpu/drm/i915/display/intel_dp_hdcp.c
> > @@ -478,23 +478,6 @@ int intel_dp_hdcp2_write_msg(struct
> > intel_digital_port
> > *dig_port,
> > return size;
> > }
> >
> > -static int
> > -get_rxinfo_hdcp_1_dev_downstream(struct intel_digital_port
> > *dig_port, bool
> > *hdcp_1_x) -{
> > -u8 rx_info[HDCP_2_2_RXINFO_LEN];
> > -int ret;
> > -
> > -ret = drm_dp_dpcd_read(&dig_port->dp.aux,
> > - DP_HDCP_2_2_REG_RXINFO_OFFSET,
> > - (void *)rx_info, HDCP_2_2_RXINFO_LEN);
> > -
> > -if (ret != HDCP_2_2_RXINFO_LEN)
> > -return ret >= 0 ? -EIO : ret;
> > -
> > -*hdcp_1_x = HDCP_2_2_HDCP1_DEVICE_CONNECTED(rx_info[1]) ? true
> > : false;
> > -return 0;
> > -}
> > -
> > static
> > ssize_t get_receiver_id_list_rx_info(struct intel_digital_port
> > *dig_port, u32
> > *dev_cnt, u8 *byte) { @@ -665,27 +648,6 @@ int
> > intel_dp_hdcp2_capable(struct intel_digital_port *dig_port,
> > return 0;
> > }
> >
> > -static
> > -int intel_dp_mst_streams_type1_capable(struct intel_connector
> > *connector,
> > - bool *capable)
> > -{
> > -struct intel_digital_port *dig_port =
> > intel_attached_dig_port(connector);
> > -struct drm_i915_private *i915 = to_i915(dig_port->base.base.dev);
> > -int ret;
> > -bool hdcp_1_x;
> > -
> > -ret = get_rxinfo_hdcp_1_dev_downstream(dig_port, &hdcp_1_x);
> > -if (ret) {
> > -drm_dbg_kms(&i915->drm,
> > - "[%s:%d] failed to read RxInfo ret=%d\n",
> > - connector->base.name, connector->base.base.id,
> > ret);
> > -return ret;
> > -}
> > -
> > -*capable = !hdcp_1_x;
> > -return 0;
> > -}
> > -
> > static const struct intel_hdcp_shim intel_dp_hdcp_shim = {
> > .write_an_aksv = intel_dp_hdcp_write_an_aksv,
> > .read_bksv = intel_dp_hdcp_read_bksv,
> > @@ -834,7 +796,6 @@ static const struct intel_hdcp_shim
> > intel_dp_mst_hdcp_shim = {
> > .stream_2_2_encryption = intel_dp_mst_hdcp2_stream_encryption,
> > .check_2_2_link = intel_dp_mst_hdcp2_check_link,
> > .hdcp_2_2_capable = intel_dp_hdcp2_capable,
> > -.streams_type1_capable = intel_dp_mst_streams_type1_capable,
> > .protocol = HDCP_PROTOCOL_DP,
> > };
> >
> > diff --git a/drivers/gpu/drm/i915/display/intel_hdcp.c
> > b/drivers/gpu/drm/i915/display/intel_hdcp.c
> > index ebc2e32aec0b..f21fcfd2d477 100644
> > --- a/drivers/gpu/drm/i915/display/intel_hdcp.c
> > +++ b/drivers/gpu/drm/i915/display/intel_hdcp.c
> > @@ -33,21 +33,6 @@ static int intel_conn_to_vcpi(struct
> > intel_connector
> > *connector)
> > return connector->port? connector->port->vcpi.vcpi : 0;
> > }
> >
> > -static bool
> > -intel_streams_type1_capable(struct intel_connector *connector) -{
> > -const struct intel_hdcp_shim *shim = connector->hdcp.shim;
> > -bool capable = false;
> > -
> > -if (!shim)
> > -return capable;
> > -
> > -if (shim->streams_type1_capable)
> > -shim->streams_type1_capable(connector, &capable);
> > -
> > -return capable;
> > -}
> > -
> > /*
> > * intel_hdcp_required_content_stream selects the most highest
> > common
> > possible HDCP
> > * content_type for all streams in DP MST topology because
> > security f/w doesn't
> > @@ -86,7 +71,7 @@ intel_hdcp_required_content_stream(struct
> > intel_digital_port *dig_port)
> > if (conn_dig_port != dig_port)
> > continue;
> >
> > -if (!enforce_type0 &&
> > !intel_streams_type1_capable(connector))
> > +if (!enforce_type0 && !dig_port->hdcp_mst_type1_capable)
> > enforce_type0 = true;
> >
> > data->streams[data->k].stream_id =
> > intel_conn_to_vcpi(connector); @@ -112,6 +97,25 @@
> > intel_hdcp_required_content_stream(struct intel_digital_port
> > *dig_port)
> > return 0;
> > }
> >
> > +static int intel_set_stream_type(struct intel_connector
> > *connector) {
> IMO intel_hdcp_prepare_streams would be more suitable.
> With above,
> Reviewed-by: Anshuman Gupta <anshuman.gupta at intel.com>
Sent v6 with that change, appreciate all the review/feedback.
If all looks good with v6, please help commit it when you get a chance.
Thanks again!
> > +struct intel_digital_port *dig_port =
> > intel_attached_dig_port(connector);
> > +struct hdcp_port_data *data = &dig_port->hdcp_port_data;
> > +struct intel_hdcp *hdcp = &connector->hdcp;
> > +int ret;
> > +
> > +if (!intel_encoder_is_mst(intel_attached_encoder(connector))) {
> > +data->k = 1;
> > +data->streams[0].stream_type = hdcp->content_type;
> > +} else {
> > +ret = intel_hdcp_required_content_stream(dig_port);
> > +if (ret)
> > +return ret;
> > +}
> > +
> > +return 0;
> > +}
> > +
> > static
> > bool intel_hdcp_is_ksv_valid(u8 *ksv)
> > {
> > @@ -1632,6 +1636,14 @@ int
> > hdcp2_authenticate_repeater_topology(struct
> > intel_connector *connector)
> > return -EINVAL;
> > }
> >
> > +/*
> > + * MST topology is not Type 1 capable if it contains a downstream
> > + * device that is only HDCP 1.x or Legacy HDCP 2.0/2.1 compliant.
> > + */
> > +dig_port->hdcp_mst_type1_capable =
> > +!HDCP_2_2_HDCP1_DEVICE_CONNECTED(rx_info[1]) &&
> > +!HDCP_2_2_HDCP_2_0_REP_CONNECTED(rx_info[1]);
> > +
> > /* Converting and Storing the seq_num_v to local variable as DWORD
> > */
> > seq_num_v =
> > drm_hdcp_be24_to_cpu((const u8
> > *)msgs.recvid_list.seq_num_v); @@ -1876,6 +1888,14 @@ static int
> > hdcp2_authenticate_and_encrypt(struct intel_connector *connector)
> > for (i = 0; i < tries && !dig_port->hdcp_auth_status; i++) {
> > ret = hdcp2_authenticate_sink(connector);
> > if (!ret) {
> > +ret = intel_set_stream_type(connector);
> > +if (ret) {
> > +drm_dbg_kms(&i915->drm,
> > + "Set stream type failed.(%d)\n",
> > + ret);
> > +break;
> > +}
> > +
> > ret =
> > hdcp2_propagate_stream_management_info(connector);
> > if (ret) {
> > drm_dbg_kms(&i915->drm,
> > @@ -1921,9 +1941,7 @@ static int
> > hdcp2_authenticate_and_encrypt(struct
> > intel_connector *connector)
> >
> > static int _intel_hdcp2_enable(struct intel_connector *connector)
> > {
> > -struct intel_digital_port *dig_port =
> > intel_attached_dig_port(connector);
> > struct drm_i915_private *i915 = to_i915(connector->base.dev);
> > -struct hdcp_port_data *data = &dig_port->hdcp_port_data;
> > struct intel_hdcp *hdcp = &connector->hdcp;
> > int ret;
> >
> > @@ -1931,16 +1949,6 @@ static int _intel_hdcp2_enable(struct
> > intel_connector *connector)
> > connector->base.name, connector->base.base.id,
> > hdcp->content_type);
> >
> > -/* Stream which requires encryption */
> > -if (!intel_encoder_is_mst(intel_attached_encoder(connector))) {
> > -data->k = 1;
> > -data->streams[0].stream_type = hdcp->content_type;
> > -} else {
> > -ret = intel_hdcp_required_content_stream(dig_port);
> > -if (ret)
> > -return ret;
> > -}
> > -
> > ret = hdcp2_authenticate_and_encrypt(connector);
> > if (ret) {
> > drm_dbg_kms(&i915->drm, "HDCP2 Type%d Enabling Failed.
> > (%d)\n",
> > --
> > 2.31.1
>
More information about the Intel-gfx
mailing list