[Intel-gfx] [PATCH v2] drm/i915/mst: update slot information for 128b/132b

Jani Nikula jani.nikula at intel.com
Fri Dec 31 13:42:43 UTC 2021


128b/132b supports using 64 slots starting from 0, while 8b/10b reserves
slot 0 for metadata.

Commit d6c6a76f80a1 ("drm: Update MST First Link Slot Information Based
on Encoding Format") added support for updating the topology state
accordingly, and commit 41724ea273cd ("drm/amd/display: Add DP 2.0 MST
DM Support") started using it in the amd driver.

This feels more than a little cumbersome, especially updating the
information in atomic check. For i915, add the update to MST connector
.compute_config hook rather than iterating over all MST managers and
connectors in global mode config .atomic_check. Fingers crossed.

v2:
- Update in .compute_config() not .atomic_check (Ville)

Cc: Bhawanpreet Lakha <Bhawanpreet.Lakha at amd.com>
Cc: Lyude Paul <lyude at redhat.com>
Cc: Uma Shankar <uma.shankar at intel.com>
Cc: Ville Syrjälä <ville.syrjala at linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula at intel.com>
---
 drivers/gpu/drm/i915/display/intel_dp_mst.c | 29 +++++++++++++++++++--
 1 file changed, 27 insertions(+), 2 deletions(-)

diff --git a/drivers/gpu/drm/i915/display/intel_dp_mst.c b/drivers/gpu/drm/i915/display/intel_dp_mst.c
index b8bc7d397c81..ff75e22bde5c 100644
--- a/drivers/gpu/drm/i915/display/intel_dp_mst.c
+++ b/drivers/gpu/drm/i915/display/intel_dp_mst.c
@@ -99,6 +99,27 @@ static int intel_dp_mst_compute_link_config(struct intel_encoder *encoder,
 	return 0;
 }
 
+static void intel_dp_mst_update_slots(struct intel_encoder *encoder,
+				      struct intel_crtc_state *crtc_state,
+				      struct drm_connector_state *conn_state)
+{
+	struct drm_i915_private *i915 = to_i915(encoder->base.dev);
+	struct intel_dp_mst_encoder *intel_mst = enc_to_mst(encoder);
+	struct intel_dp *intel_dp = &intel_mst->primary->dp;
+	struct drm_dp_mst_topology_mgr *mgr = &intel_dp->mst_mgr;
+	struct drm_dp_mst_topology_state *topology_state;
+	u8 link_coding_cap = intel_dp_is_uhbr(crtc_state) ?
+		DP_CAP_ANSI_128B132B : DP_CAP_ANSI_8B10B;
+
+	topology_state = drm_atomic_get_mst_topology_state(conn_state->state, mgr);
+	if (IS_ERR(topology_state)) {
+		drm_dbg_kms(&i915->drm, "slot update failed\n");
+		return;
+	}
+
+	drm_dp_mst_update_slots(topology_state, link_coding_cap);
+}
+
 static int intel_dp_mst_compute_config(struct intel_encoder *encoder,
 				       struct intel_crtc_state *pipe_config,
 				       struct drm_connector_state *conn_state)
@@ -155,6 +176,8 @@ static int intel_dp_mst_compute_config(struct intel_encoder *encoder,
 	if (ret)
 		return ret;
 
+	intel_dp_mst_update_slots(encoder, pipe_config, conn_state);
+
 	pipe_config->limited_color_range =
 		intel_dp_limited_color_range(pipe_config, conn_state);
 
@@ -357,6 +380,7 @@ static void intel_mst_disable_dp(struct intel_atomic_state *state,
 	struct intel_connector *connector =
 		to_intel_connector(old_conn_state->connector);
 	struct drm_i915_private *i915 = to_i915(connector->base.dev);
+	int start_slot = intel_dp_is_uhbr(old_crtc_state) ? 0 : 1;
 	int ret;
 
 	drm_dbg_kms(&i915->drm, "active links %d\n",
@@ -366,7 +390,7 @@ static void intel_mst_disable_dp(struct intel_atomic_state *state,
 
 	drm_dp_mst_reset_vcpi_slots(&intel_dp->mst_mgr, connector->port);
 
-	ret = drm_dp_update_payload_part1(&intel_dp->mst_mgr, 1);
+	ret = drm_dp_update_payload_part1(&intel_dp->mst_mgr, start_slot);
 	if (ret) {
 		drm_dbg_kms(&i915->drm, "failed to update payload %d\n", ret);
 	}
@@ -475,6 +499,7 @@ static void intel_mst_pre_enable_dp(struct intel_atomic_state *state,
 	struct drm_i915_private *dev_priv = to_i915(encoder->base.dev);
 	struct intel_connector *connector =
 		to_intel_connector(conn_state->connector);
+	int start_slot = intel_dp_is_uhbr(pipe_config) ? 0 : 1;
 	int ret;
 	bool first_mst_stream;
 
@@ -509,7 +534,7 @@ static void intel_mst_pre_enable_dp(struct intel_atomic_state *state,
 
 	intel_dp->active_mst_links++;
 
-	ret = drm_dp_update_payload_part1(&intel_dp->mst_mgr, 1);
+	ret = drm_dp_update_payload_part1(&intel_dp->mst_mgr, start_slot);
 
 	/*
 	 * Before Gen 12 this is not done as part of
-- 
2.30.2



More information about the Intel-gfx mailing list