[Intel-gfx] [PATCH] drm/i915/mst: update slot information for 128b/132b

[Jani Nikula]

On Fri, 17 Dec 2021, Ville Syrjälä <ville.syrjala at linux.intel.com> wrote:
> On Thu, Dec 16, 2021 at 04:05:48PM +0200, Jani Nikula wrote:
>> 128b/132b supports using 64 slots starting from 0, while 8b/10b reserves
>> slot 0 for metadata.
>> 
>> Commit d6c6a76f80a1 ("drm: Update MST First Link Slot Information Based
>> on Encoding Format") added support for updating the topology state
>> accordingly, and commit 41724ea273cd ("drm/amd/display: Add DP 2.0 MST
>> DM Support") started using it in the amd driver.
>> 
>> This feels more than a little cumbersome, especially updating the
>> information in atomic check. For i915, add the update to MST connector
>> .atomic_check hook rather than iterating over all MST managers and
>> connectors in global mode config .atomic_check. Fingers crossed.
>> 
>> Cc: Bhawanpreet Lakha <Bhawanpreet.Lakha at amd.com>
>> Cc: Lyude Paul <lyude at redhat.com>
>> Cc: Uma Shankar <uma.shankar at intel.com>
>> Cc: Ville Syrjälä <ville.syrjala at linux.intel.com>
>> Signed-off-by: Jani Nikula <jani.nikula at intel.com>
>> ---
>>  drivers/gpu/drm/i915/display/intel_dp_mst.c | 18 +++++++++++++++---
>>  1 file changed, 15 insertions(+), 3 deletions(-)
>> 
>> diff --git a/drivers/gpu/drm/i915/display/intel_dp_mst.c b/drivers/gpu/drm/i915/display/intel_dp_mst.c
>> index b8bc7d397c81..d13c7952a8d6 100644
>> --- a/drivers/gpu/drm/i915/display/intel_dp_mst.c
>> +++ b/drivers/gpu/drm/i915/display/intel_dp_mst.c
>> @@ -302,6 +302,8 @@ intel_dp_mst_atomic_check(struct drm_connector *connector,
>>  	if (!old_conn_state->crtc)
>>  		return 0;
>>  
>> +	mgr = &enc_to_mst(to_intel_encoder(old_conn_state->best_encoder))->primary->dp.mst_mgr;
>> +
>>  	/* We only want to free VCPI if this state disables the CRTC on this
>>  	 * connector
>>  	 */
>> @@ -309,6 +311,15 @@ intel_dp_mst_atomic_check(struct drm_connector *connector,
>>  		struct intel_crtc *crtc = to_intel_crtc(new_crtc);
>>  		struct intel_crtc_state *crtc_state =
>>  			intel_atomic_get_new_crtc_state(state, crtc);
>> +		struct drm_dp_mst_topology_state *topology_state;
>> +		u8 link_coding_cap = intel_dp_is_uhbr(crtc_state) ?
>> +			DP_CAP_ANSI_128B132B : DP_CAP_ANSI_8B10B;
>
> This is too early. We haven't determined the link rate yet.
> So intel_dp_mst_compute_config() is the earliest we can do this.

D'oh!

Thanks, fixed in v2.

>
>> +
>> +		topology_state = drm_atomic_get_mst_topology_state(&state->base, mgr);
>> +		if (IS_ERR(topology_state))
>> +			return PTR_ERR(topology_state);
>> +
>> +		drm_dp_mst_update_slots(topology_state, link_coding_cap);
>>  
>>  		if (!crtc_state ||
>>  		    !drm_atomic_crtc_needs_modeset(&crtc_state->uapi) ||
>> @@ -316,7 +327,6 @@ intel_dp_mst_atomic_check(struct drm_connector *connector,
>>  			return 0;
>>  	}
>>  
>> -	mgr = &enc_to_mst(to_intel_encoder(old_conn_state->best_encoder))->primary->dp.mst_mgr;
>>  	ret = drm_dp_atomic_release_vcpi_slots(&state->base, mgr,
>>  					       intel_connector->port);
>>  
>> @@ -357,6 +367,7 @@ static void intel_mst_disable_dp(struct intel_atomic_state *state,
>>  	struct intel_connector *connector =
>>  		to_intel_connector(old_conn_state->connector);
>>  	struct drm_i915_private *i915 = to_i915(connector->base.qdev);
>> +	int start_slot = intel_dp_is_uhbr(old_crtc_state) ? 0 : 1;a
>>  	int ret;
>>  
>>  	drm_dbg_kms(&i915->drm, "active links %d\n",
>> @@ -366,7 +377,7 @@ static void intel_mst_disable_dp(struct intel_atomic_state *state,
>>  
>>  	drm_dp_mst_reset_vcpi_slots(&intel_dp->mst_mgr, connector->port);
>>  
>> -	ret = drm_dp_update_payload_part1(&intel_dp->mst_mgr, 1);
>> +	ret = drm_dp_update_payload_part1(&intel_dp->mst_mgr, start_slot);
>
> I supoose what we should do in these places is grab the new/old
> mst state and dig the slot info out from it. Or I guess even better
> to just pass in the whole mst_state and let the mst code dig out what
> it needs.

For the time being, I just left this one be. I agree it should be done
in the MST code, but IIUC that's in need of an overhaul anyway wrt the
state handling, and I'm not really signing up for that...

BR,
Jani.

>
>>  	if (ret) {
>>  		drm_dbg_kms(&i915->drm, "failed to update payload %d\n", ret);
>>  	}
>> @@ -475,6 +486,7 @@ static void intel_mst_pre_enable_dp(struct intel_atomic_state *state,
>>  	struct drm_i915_private *dev_priv = to_i915(encoder->base.dev);
>>  	struct intel_connector *connector =
>>  		to_intel_connector(conn_state->connector);
>> +	int start_slot = intel_dp_is_uhbr(pipe_config) ? 0 : 1;
>>  	int ret;
>>  	bool first_mst_stream;
>>  
>> @@ -509,7 +521,7 @@ static void intel_mst_pre_enable_dp(struct intel_atomic_state *state,
>>  
>>  	intel_dp->active_mst_links++;
>>  
>> -	ret = drm_dp_update_payload_part1(&intel_dp->mst_mgr, 1);
>> +	ret = drm_dp_update_payload_part1(&intel_dp->mst_mgr, start_slot);
>>  
>>  	/*
>>  	 * Before Gen 12 this is not done as part of
>> -- 
>> 2.30.2

-- 
Jani Nikula, Intel Open Source Graphics Center