[Intel-gfx] [PATCH 5/9] drm/i915: Split skl+ plane update into noarm+arm pair
Ville Syrjälä
ville.syrjala at linux.intel.com
Thu Oct 28 13:03:32 UTC 2021
On Wed, Oct 27, 2021 at 08:11:37PM +0300, Lisovskiy, Stanislav wrote:
> On Mon, Oct 18, 2021 at 02:50:26PM +0300, Ville Syrjala wrote:
> > From: Ville Syrjälä <ville.syrjala at linux.intel.com>
> >
> > Chop skl_program_plane() into two halves. Fist half becomes
> > the _noarm() variant, second part the _arm() variant.
> >
> > Fortunately I have already previously grouped the register
> > writes into roughtly the correct order, so the split looks
> > surprisingly clean.
> >
> > A few notable oddities I did not realize were self arming
> > are AUX_DIST and COLOR_CTL.
> >
> > i915_update_info doesn't look too terrible on my cfl running
> > kms_atomic_transition --r plane-all-transition --extended:
> > w/o patch w/ patch
> > Updates: 2178 Updates: 2018
> > | |
> > 1us | 1us |
> > | |
> > 4us | 4us |*****
> > |********* |**********
> > 16us |********** 16us |*******
> > |*** |
> > 66us | 66us |
> > | |
> > 262us | 262us |
> > | |
> > 1ms | 1ms |
> > | |
> > 4ms | 4ms |
> > | |
> > 17ms | 17ms |
> > | |
> > Min update: 8332ns Min update: 6164ns
> > Max update: 48758ns Max update: 31808ns
> > Average update: 19959ns Average update: 13159ns
> > Overruns > 100us: 0 Overruns > 100us: 0
> >
> > And with lockdep enabled:
> > w/o patch w/ patch
> > Updates: 2177 Updates: 2172
> > | |
> > 1us | 1us |
> > | |
> > 4us | 4us |
> > |******* |*********
> > 16us |********** 16us |**********
> > |******* |*
> > 66us | 66us |
> > | |
> > 262us | 262us |
> > | |
> > 1ms | 1ms |
> > | |
> > 4ms | 4ms |
> > | |
> > 17ms | 17ms |
> > | |
> > Min update: 12645ns Min update: 9980ns
> > Max update: 50153ns Max update: 33533ns
> > Average update: 25337ns Average update: 18245ns
> > Overruns > 250us: 0 Overruns > 250us: 0
> >
> > TODO: On icl+ everything seems to be armed by PLANE_SURF, so we
> > can optimize this even further on modern platforms. But I
> > think there's a bit of refactoring to be done first to
> > figure out the best way to go about it (eg. just reusing
> > the current skl+ functions, or doing a lower level split).
> >
> > TODO: Split scaler programming as well, but IIRC the scaler
> > has some oddball double buffering behaviour on some
> > platforms, so needs proper reverse engineering
> >
> > Cc: Stanislav Lisovskiy <stanislav.lisovskiy at intel.com>
> > Signed-off-by: Ville Syrjälä <ville.syrjala at linux.intel.com>
> > ---
> > .../drm/i915/display/skl_universal_plane.c | 113 +++++++++++-------
> > 1 file changed, 72 insertions(+), 41 deletions(-)
> >
> > diff --git a/drivers/gpu/drm/i915/display/skl_universal_plane.c b/drivers/gpu/drm/i915/display/skl_universal_plane.c
> > index 74f3870d39b1..2a822e1e465e 100644
> > --- a/drivers/gpu/drm/i915/display/skl_universal_plane.c
> > +++ b/drivers/gpu/drm/i915/display/skl_universal_plane.c
> > @@ -1050,60 +1050,32 @@ static void icl_plane_csc_load_black(struct intel_plane *plane)
> > }
> >
> > static void
> > -skl_program_plane(struct intel_plane *plane,
> > - const struct intel_crtc_state *crtc_state,
> > - const struct intel_plane_state *plane_state,
> > - int color_plane)
> > +skl_program_plane_noarm(struct intel_plane *plane,
> > + const struct intel_crtc_state *crtc_state,
> > + const struct intel_plane_state *plane_state,
> > + int color_plane)
> > {
> > struct drm_i915_private *dev_priv = to_i915(plane->base.dev);
> > enum plane_id plane_id = plane->id;
> > enum pipe pipe = plane->pipe;
> > - const struct drm_intel_sprite_colorkey *key = &plane_state->ckey;
> > u32 stride = skl_plane_stride(plane_state, color_plane);
> > const struct drm_framebuffer *fb = plane_state->hw.fb;
> > - int aux_plane = skl_main_to_aux_plane(fb, color_plane);
> > int crtc_x = plane_state->uapi.dst.x1;
> > int crtc_y = plane_state->uapi.dst.y1;
> > - u32 x = plane_state->view.color_plane[color_plane].x;
> > - u32 y = plane_state->view.color_plane[color_plane].y;
> > u32 src_w = drm_rect_width(&plane_state->uapi.src) >> 16;
> > u32 src_h = drm_rect_height(&plane_state->uapi.src) >> 16;
> > - u8 alpha = plane_state->hw.alpha >> 8;
> > - u32 plane_color_ctl = 0, aux_dist = 0;
> > unsigned long irqflags;
> > - u32 keymsk, keymax;
> > - u32 plane_ctl = plane_state->ctl;
> > -
> > - plane_ctl |= skl_plane_ctl_crtc(crtc_state);
> > -
> > - if (DISPLAY_VER(dev_priv) >= 10)
> > - plane_color_ctl = plane_state->color_ctl |
> > - glk_plane_color_ctl_crtc(crtc_state);
> >
> > /* Sizes are 0 based */
> > src_w--;
> > src_h--;
> >
> > - keymax = (key->max_value & 0xffffff) | PLANE_KEYMAX_ALPHA(alpha);
> > -
> > - keymsk = key->channel_mask & 0x7ffffff;
> > - if (alpha < 0xff)
> > - keymsk |= PLANE_KEYMSK_ALPHA_ENABLE;
> > -
> > /* The scaler will handle the output position */
> > if (plane_state->scaler_id >= 0) {
> > crtc_x = 0;
> > crtc_y = 0;
> > }
> >
> > - if (aux_plane) {
> > - aux_dist = skl_surf_address(plane_state, aux_plane) -
> > - skl_surf_address(plane_state, color_plane);
> > -
> > - if (DISPLAY_VER(dev_priv) < 12)
> > - aux_dist |= skl_plane_stride(plane_state, aux_plane);
> > - }
> > -
> > spin_lock_irqsave(&dev_priv->uncore.lock, irqflags);
> >
> > /*
> > @@ -1119,16 +1091,10 @@ skl_program_plane(struct intel_plane *plane,
> > intel_de_write_fw(dev_priv, PLANE_SIZE(pipe, plane_id),
> > (src_h << 16) | src_w);
> >
> > - intel_de_write_fw(dev_priv, PLANE_AUX_DIST(pipe, plane_id), aux_dist);
> > -
> > if (icl_is_hdr_plane(dev_priv, plane_id))
> > intel_de_write_fw(dev_priv, PLANE_CUS_CTL(pipe, plane_id),
> > plane_state->cus_ctl);
> >
> > - if (DISPLAY_VER(dev_priv) >= 10)
> > - intel_de_write_fw(dev_priv, PLANE_COLOR_CTL(pipe, plane_id),
> > - plane_color_ctl);
> > -
> > if (fb->format->is_yuv && icl_is_hdr_plane(dev_priv, plane_id))
> > icl_program_input_csc(plane, crtc_state, plane_state);
> >
> > @@ -1138,6 +1104,52 @@ skl_program_plane(struct intel_plane *plane,
> >
> > skl_write_plane_wm(plane, crtc_state);
> >
> > + intel_psr2_program_plane_sel_fetch(plane, crtc_state, plane_state, color_plane);
> > +
> > + spin_unlock_irqrestore(&dev_priv->uncore.lock, irqflags);
> > +}
> > +
> > +static void
> > +skl_program_plane_arm(struct intel_plane *plane,
> > + const struct intel_crtc_state *crtc_state,
> > + const struct intel_plane_state *plane_state,
> > + int color_plane)
> > +{
> > + struct drm_i915_private *dev_priv = to_i915(plane->base.dev);
> > + enum plane_id plane_id = plane->id;
> > + enum pipe pipe = plane->pipe;
> > + const struct drm_intel_sprite_colorkey *key = &plane_state->ckey;
> > + const struct drm_framebuffer *fb = plane_state->hw.fb;
> > + int aux_plane = skl_main_to_aux_plane(fb, color_plane);
> > + u32 x = plane_state->view.color_plane[color_plane].x;
> > + u32 y = plane_state->view.color_plane[color_plane].y;
> > + u32 keymsk, keymax, aux_dist = 0, plane_color_ctl = 0;
> > + u8 alpha = plane_state->hw.alpha >> 8;
> > + u32 plane_ctl = plane_state->ctl;
> > + unsigned long irqflags;
> > +
> > + plane_ctl |= skl_plane_ctl_crtc(crtc_state);
> > +
> > + if (DISPLAY_VER(dev_priv) >= 10)
> > + plane_color_ctl = plane_state->color_ctl |
> > + glk_plane_color_ctl_crtc(crtc_state);
> > +
> > + keymax = (key->max_value & 0xffffff) | PLANE_KEYMAX_ALPHA(alpha);
> > +
> > + keymsk = key->channel_mask & 0x7ffffff;
> > + if (alpha < 0xff)
> > + keymsk |= PLANE_KEYMSK_ALPHA_ENABLE;
> > +
> > + if (aux_plane) {
> > + aux_dist = skl_surf_address(plane_state, aux_plane) -
> > + skl_surf_address(plane_state, color_plane);
> > +
> > + if (DISPLAY_VER(dev_priv) < 12)
> > + aux_dist |= skl_plane_stride(plane_state, aux_plane);
> > + }
> > +
> > + spin_lock_irqsave(&dev_priv->uncore.lock, irqflags);
> > +
> > intel_de_write_fw(dev_priv, PLANE_KEYVAL(pipe, plane_id),
> > key->min_value);
> > intel_de_write_fw(dev_priv, PLANE_KEYMSK(pipe, plane_id), keymsk);
> > @@ -1146,17 +1158,22 @@ skl_program_plane(struct intel_plane *plane,
> > intel_de_write_fw(dev_priv, PLANE_OFFSET(pipe, plane_id),
> > (y << 16) | x);
>
> Wondering, if we could also move PLANE_OFFSET register to non-arming
> section.
No. It is self arming.
> BSpec states, that it is not arming and being armed by
> writing PLANE_SURF. I think we even agreed to check if that was true,
> so I made some tests with DG2, I think and writes to PLANE_OFFSET
> didn't anyhow affect the hw until PLANE_SURF was written(was checking
> it by reading the crcs...)
Your test was invalid since it was done on icl+ where everything is
armed by PLANE_SURF.
>
> >
> > + intel_de_write_fw(dev_priv, PLANE_AUX_DIST(pipe, plane_id), aux_dist);
> > +
> > if (DISPLAY_VER(dev_priv) < 11)
> > intel_de_write_fw(dev_priv, PLANE_AUX_OFFSET(pipe, plane_id),
> > (plane_state->view.color_plane[1].y << 16) |
> > plane_state->view.color_plane[1].x);
> >
> > - intel_psr2_program_plane_sel_fetch(plane, crtc_state, plane_state, color_plane);
> > + if (DISPLAY_VER(dev_priv) >= 10)
> > + intel_de_write_fw(dev_priv, PLANE_COLOR_CTL(pipe, plane_id), plane_color_ctl);
> >
> > /*
> > * Enable the scaler before the plane so that we don't
> > * get a catastrophic underrun even if the two operations
> > * end up happening in two different frames.
> > + *
> > + * TODO: split into noarm+arm pair
> > */
> > if (plane_state->scaler_id >= 0)
> > skl_program_plane_scaler(plane, crtc_state, plane_state);
> > @@ -1199,7 +1216,20 @@ skl_plane_async_flip(struct intel_plane *plane,
> > spin_unlock_irqrestore(&dev_priv->uncore.lock, irqflags);
> > }
> >
> > -/* TODO: split into noarm+arm pair */
> > +static void
> > +skl_plane_update_noarm(struct intel_plane *plane,
> > + const struct intel_crtc_state *crtc_state,
> > + const struct intel_plane_state *plane_state)
> > +{
> > + int color_plane = 0;
> > +
> > + if (plane_state->planar_linked_plane && !plane_state->planar_slave)
> > + /* Program the UV plane on planar master */
> > + color_plane = 1;
> > +
> > + skl_program_plane_noarm(plane, crtc_state, plane_state, color_plane);
> > +}
> > +
> > static void
> > skl_plane_update_arm(struct intel_plane *plane,
> > const struct intel_crtc_state *crtc_state,
> > @@ -1211,7 +1241,7 @@ skl_plane_update_arm(struct intel_plane *plane,
> > /* Program the UV plane on planar master */
> > color_plane = 1;
> >
> > - skl_program_plane(plane, crtc_state, plane_state, color_plane);
> > + skl_program_plane_arm(plane, crtc_state, plane_state, color_plane);
> > }
> >
> > static bool intel_format_is_p01x(u32 format)
> > @@ -2159,6 +2189,7 @@ skl_universal_plane_create(struct drm_i915_private *dev_priv,
> > }
> >
> > plane->max_stride = skl_plane_max_stride;
> > + plane->update_noarm = skl_plane_update_noarm;
> > plane->update_arm = skl_plane_update_arm;
> > plane->disable_arm = skl_plane_disable_arm;
> > plane->get_hw_state = skl_plane_get_hw_state;
> > --
> > 2.32.0
> >
--
Ville Syrjälä
Intel
More information about the Intel-gfx
mailing list