[Intel-gfx] [PATCH 5/9] drm/i915: Split skl+ plane update into noarm+arm pair
Lisovskiy, Stanislav
stanislav.lisovskiy at intel.com
Thu Oct 28 13:54:19 UTC 2021
On Thu, Oct 28, 2021 at 04:03:32PM +0300, Ville Syrjälä wrote:
> On Wed, Oct 27, 2021 at 08:11:37PM +0300, Lisovskiy, Stanislav wrote:
> > On Mon, Oct 18, 2021 at 02:50:26PM +0300, Ville Syrjala wrote:
> > > From: Ville Syrjälä <ville.syrjala at linux.intel.com>
> > >
> > > Chop skl_program_plane() into two halves. Fist half becomes
> > > the _noarm() variant, second part the _arm() variant.
> > >
> > > Fortunately I have already previously grouped the register
> > > writes into roughtly the correct order, so the split looks
> > > surprisingly clean.
> > >
> > > A few notable oddities I did not realize were self arming
> > > are AUX_DIST and COLOR_CTL.
> > >
> > > i915_update_info doesn't look too terrible on my cfl running
> > > kms_atomic_transition --r plane-all-transition --extended:
> > > w/o patch w/ patch
> > > Updates: 2178 Updates: 2018
> > > | |
> > > 1us | 1us |
> > > | |
> > > 4us | 4us |*****
> > > |********* |**********
> > > 16us |********** 16us |*******
> > > |*** |
> > > 66us | 66us |
> > > | |
> > > 262us | 262us |
> > > | |
> > > 1ms | 1ms |
> > > | |
> > > 4ms | 4ms |
> > > | |
> > > 17ms | 17ms |
> > > | |
> > > Min update: 8332ns Min update: 6164ns
> > > Max update: 48758ns Max update: 31808ns
> > > Average update: 19959ns Average update: 13159ns
> > > Overruns > 100us: 0 Overruns > 100us: 0
> > >
> > > And with lockdep enabled:
> > > w/o patch w/ patch
> > > Updates: 2177 Updates: 2172
> > > | |
> > > 1us | 1us |
> > > | |
> > > 4us | 4us |
> > > |******* |*********
> > > 16us |********** 16us |**********
> > > |******* |*
> > > 66us | 66us |
> > > | |
> > > 262us | 262us |
> > > | |
> > > 1ms | 1ms |
> > > | |
> > > 4ms | 4ms |
> > > | |
> > > 17ms | 17ms |
> > > | |
> > > Min update: 12645ns Min update: 9980ns
> > > Max update: 50153ns Max update: 33533ns
> > > Average update: 25337ns Average update: 18245ns
> > > Overruns > 250us: 0 Overruns > 250us: 0
> > >
> > > TODO: On icl+ everything seems to be armed by PLANE_SURF, so we
> > > can optimize this even further on modern platforms. But I
> > > think there's a bit of refactoring to be done first to
> > > figure out the best way to go about it (eg. just reusing
> > > the current skl+ functions, or doing a lower level split).
> > >
> > > TODO: Split scaler programming as well, but IIRC the scaler
> > > has some oddball double buffering behaviour on some
> > > platforms, so needs proper reverse engineering
> > >
> > > Cc: Stanislav Lisovskiy <stanislav.lisovskiy at intel.com>
> > > Signed-off-by: Ville Syrjälä <ville.syrjala at linux.intel.com>
> > > ---
> > > .../drm/i915/display/skl_universal_plane.c | 113 +++++++++++-------
> > > 1 file changed, 72 insertions(+), 41 deletions(-)
> > >
> > > diff --git a/drivers/gpu/drm/i915/display/skl_universal_plane.c b/drivers/gpu/drm/i915/display/skl_universal_plane.c
> > > index 74f3870d39b1..2a822e1e465e 100644
> > > --- a/drivers/gpu/drm/i915/display/skl_universal_plane.c
> > > +++ b/drivers/gpu/drm/i915/display/skl_universal_plane.c
> > > @@ -1050,60 +1050,32 @@ static void icl_plane_csc_load_black(struct intel_plane *plane)
> > > }
> > >
> > > static void
> > > -skl_program_plane(struct intel_plane *plane,
> > > - const struct intel_crtc_state *crtc_state,
> > > - const struct intel_plane_state *plane_state,
> > > - int color_plane)
> > > +skl_program_plane_noarm(struct intel_plane *plane,
> > > + const struct intel_crtc_state *crtc_state,
> > > + const struct intel_plane_state *plane_state,
> > > + int color_plane)
> > > {
> > > struct drm_i915_private *dev_priv = to_i915(plane->base.dev);
> > > enum plane_id plane_id = plane->id;
> > > enum pipe pipe = plane->pipe;
> > > - const struct drm_intel_sprite_colorkey *key = &plane_state->ckey;
> > > u32 stride = skl_plane_stride(plane_state, color_plane);
> > > const struct drm_framebuffer *fb = plane_state->hw.fb;
> > > - int aux_plane = skl_main_to_aux_plane(fb, color_plane);
> > > int crtc_x = plane_state->uapi.dst.x1;
> > > int crtc_y = plane_state->uapi.dst.y1;
> > > - u32 x = plane_state->view.color_plane[color_plane].x;
> > > - u32 y = plane_state->view.color_plane[color_plane].y;
> > > u32 src_w = drm_rect_width(&plane_state->uapi.src) >> 16;
> > > u32 src_h = drm_rect_height(&plane_state->uapi.src) >> 16;
> > > - u8 alpha = plane_state->hw.alpha >> 8;
> > > - u32 plane_color_ctl = 0, aux_dist = 0;
> > > unsigned long irqflags;
> > > - u32 keymsk, keymax;
> > > - u32 plane_ctl = plane_state->ctl;
> > > -
> > > - plane_ctl |= skl_plane_ctl_crtc(crtc_state);
> > > -
> > > - if (DISPLAY_VER(dev_priv) >= 10)
> > > - plane_color_ctl = plane_state->color_ctl |
> > > - glk_plane_color_ctl_crtc(crtc_state);
> > >
> > > /* Sizes are 0 based */
> > > src_w--;
> > > src_h--;
> > >
> > > - keymax = (key->max_value & 0xffffff) | PLANE_KEYMAX_ALPHA(alpha);
> > > -
> > > - keymsk = key->channel_mask & 0x7ffffff;
> > > - if (alpha < 0xff)
> > > - keymsk |= PLANE_KEYMSK_ALPHA_ENABLE;
> > > -
> > > /* The scaler will handle the output position */
> > > if (plane_state->scaler_id >= 0) {
> > > crtc_x = 0;
> > > crtc_y = 0;
> > > }
> > >
> > > - if (aux_plane) {
> > > - aux_dist = skl_surf_address(plane_state, aux_plane) -
> > > - skl_surf_address(plane_state, color_plane);
> > > -
> > > - if (DISPLAY_VER(dev_priv) < 12)
> > > - aux_dist |= skl_plane_stride(plane_state, aux_plane);
> > > - }
> > > -
> > > spin_lock_irqsave(&dev_priv->uncore.lock, irqflags);
> > >
> > > /*
> > > @@ -1119,16 +1091,10 @@ skl_program_plane(struct intel_plane *plane,
> > > intel_de_write_fw(dev_priv, PLANE_SIZE(pipe, plane_id),
> > > (src_h << 16) | src_w);
> > >
> > > - intel_de_write_fw(dev_priv, PLANE_AUX_DIST(pipe, plane_id), aux_dist);
> > > -
> > > if (icl_is_hdr_plane(dev_priv, plane_id))
> > > intel_de_write_fw(dev_priv, PLANE_CUS_CTL(pipe, plane_id),
> > > plane_state->cus_ctl);
> > >
> > > - if (DISPLAY_VER(dev_priv) >= 10)
> > > - intel_de_write_fw(dev_priv, PLANE_COLOR_CTL(pipe, plane_id),
> > > - plane_color_ctl);
> > > -
> > > if (fb->format->is_yuv && icl_is_hdr_plane(dev_priv, plane_id))
> > > icl_program_input_csc(plane, crtc_state, plane_state);
> > >
> > > @@ -1138,6 +1104,52 @@ skl_program_plane(struct intel_plane *plane,
> > >
> > > skl_write_plane_wm(plane, crtc_state);
> > >
> > > + intel_psr2_program_plane_sel_fetch(plane, crtc_state, plane_state, color_plane);
> > > +
> > > + spin_unlock_irqrestore(&dev_priv->uncore.lock, irqflags);
> > > +}
> > > +
> > > +static void
> > > +skl_program_plane_arm(struct intel_plane *plane,
> > > + const struct intel_crtc_state *crtc_state,
> > > + const struct intel_plane_state *plane_state,
> > > + int color_plane)
> > > +{
> > > + struct drm_i915_private *dev_priv = to_i915(plane->base.dev);
> > > + enum plane_id plane_id = plane->id;
> > > + enum pipe pipe = plane->pipe;
> > > + const struct drm_intel_sprite_colorkey *key = &plane_state->ckey;
> > > + const struct drm_framebuffer *fb = plane_state->hw.fb;
> > > + int aux_plane = skl_main_to_aux_plane(fb, color_plane);
> > > + u32 x = plane_state->view.color_plane[color_plane].x;
> > > + u32 y = plane_state->view.color_plane[color_plane].y;
> > > + u32 keymsk, keymax, aux_dist = 0, plane_color_ctl = 0;
> > > + u8 alpha = plane_state->hw.alpha >> 8;
> > > + u32 plane_ctl = plane_state->ctl;
> > > + unsigned long irqflags;
> > > +
> > > + plane_ctl |= skl_plane_ctl_crtc(crtc_state);
> > > +
> > > + if (DISPLAY_VER(dev_priv) >= 10)
> > > + plane_color_ctl = plane_state->color_ctl |
> > > + glk_plane_color_ctl_crtc(crtc_state);
> > > +
> > > + keymax = (key->max_value & 0xffffff) | PLANE_KEYMAX_ALPHA(alpha);
> > > +
> > > + keymsk = key->channel_mask & 0x7ffffff;
> > > + if (alpha < 0xff)
> > > + keymsk |= PLANE_KEYMSK_ALPHA_ENABLE;
> > > +
> > > + if (aux_plane) {
> > > + aux_dist = skl_surf_address(plane_state, aux_plane) -
> > > + skl_surf_address(plane_state, color_plane);
> > > +
> > > + if (DISPLAY_VER(dev_priv) < 12)
> > > + aux_dist |= skl_plane_stride(plane_state, aux_plane);
> > > + }
> > > +
> > > + spin_lock_irqsave(&dev_priv->uncore.lock, irqflags);
> > > +
> > > intel_de_write_fw(dev_priv, PLANE_KEYVAL(pipe, plane_id),
> > > key->min_value);
> > > intel_de_write_fw(dev_priv, PLANE_KEYMSK(pipe, plane_id), keymsk);
> > > @@ -1146,17 +1158,22 @@ skl_program_plane(struct intel_plane *plane,
> > > intel_de_write_fw(dev_priv, PLANE_OFFSET(pipe, plane_id),
> > > (y << 16) | x);
> >
> > Wondering, if we could also move PLANE_OFFSET register to non-arming
> > section.
>
> No. It is self arming.
>
> > BSpec states, that it is not arming and being armed by
> > writing PLANE_SURF. I think we even agreed to check if that was true,
> > so I made some tests with DG2, I think and writes to PLANE_OFFSET
> > didn't anyhow affect the hw until PLANE_SURF was written(was checking
> > it by reading the crcs...)
>
> Your test was invalid since it was done on icl+ where everything is
> armed by PLANE_SURF.
Well, at that moment the main question was about DG2/ADL, so I tested
it with that particular platform(we had atomic update issues mostly there)
Also I guess it means PLANE_OFFSET can be moved to non-arming section
for icl+ at least.
Or was it done somewhere later in your series?
Didn't walk through all of the patches yet.
>
> >
> > >
> > > + intel_de_write_fw(dev_priv, PLANE_AUX_DIST(pipe, plane_id), aux_dist);
> > > +
> > > if (DISPLAY_VER(dev_priv) < 11)
> > > intel_de_write_fw(dev_priv, PLANE_AUX_OFFSET(pipe, plane_id),
> > > (plane_state->view.color_plane[1].y << 16) |
> > > plane_state->view.color_plane[1].x);
> > >
> > > - intel_psr2_program_plane_sel_fetch(plane, crtc_state, plane_state, color_plane);
> > > + if (DISPLAY_VER(dev_priv) >= 10)
> > > + intel_de_write_fw(dev_priv, PLANE_COLOR_CTL(pipe, plane_id), plane_color_ctl);
> > >
> > > /*
> > > * Enable the scaler before the plane so that we don't
> > > * get a catastrophic underrun even if the two operations
> > > * end up happening in two different frames.
> > > + *
> > > + * TODO: split into noarm+arm pair
> > > */
> > > if (plane_state->scaler_id >= 0)
> > > skl_program_plane_scaler(plane, crtc_state, plane_state);
> > > @@ -1199,7 +1216,20 @@ skl_plane_async_flip(struct intel_plane *plane,
> > > spin_unlock_irqrestore(&dev_priv->uncore.lock, irqflags);
> > > }
> > >
> > > -/* TODO: split into noarm+arm pair */
> > > +static void
> > > +skl_plane_update_noarm(struct intel_plane *plane,
> > > + const struct intel_crtc_state *crtc_state,
> > > + const struct intel_plane_state *plane_state)
> > > +{
> > > + int color_plane = 0;
> > > +
> > > + if (plane_state->planar_linked_plane && !plane_state->planar_slave)
> > > + /* Program the UV plane on planar master */
> > > + color_plane = 1;
> > > +
> > > + skl_program_plane_noarm(plane, crtc_state, plane_state, color_plane);
> > > +}
> > > +
> > > static void
> > > skl_plane_update_arm(struct intel_plane *plane,
> > > const struct intel_crtc_state *crtc_state,
> > > @@ -1211,7 +1241,7 @@ skl_plane_update_arm(struct intel_plane *plane,
> > > /* Program the UV plane on planar master */
> > > color_plane = 1;
> > >
> > > - skl_program_plane(plane, crtc_state, plane_state, color_plane);
> > > + skl_program_plane_arm(plane, crtc_state, plane_state, color_plane);
> > > }
> > >
> > > static bool intel_format_is_p01x(u32 format)
> > > @@ -2159,6 +2189,7 @@ skl_universal_plane_create(struct drm_i915_private *dev_priv,
> > > }
> > >
> > > plane->max_stride = skl_plane_max_stride;
> > > + plane->update_noarm = skl_plane_update_noarm;
> > > plane->update_arm = skl_plane_update_arm;
> > > plane->disable_arm = skl_plane_disable_arm;
> > > plane->get_hw_state = skl_plane_get_hw_state;
> > > --
> > > 2.32.0
> > >
>
> --
> Ville Syrjälä
> Intel
More information about the Intel-gfx
mailing list