[Intel-gfx] [PATCH 5/5] drm/i915/dsi: Read/write proper brightness value via MIPI DCS command

[Lee Shawn C]

Driver has to swap the endian before send brightness level value
to tcon.

v2: Use __be16 instead of u16 to fix sparse warning.
v3: Send one or two bytes brightness value depend on the precision.

Reported-by: kernel test robot <lkp at intel.com>
Cc: Ville Syrjala <ville.syrjala at linux.intel.com>
Cc: Jani Nikula <jani.nikula at linux.intel.com>
Cc: Vandita Kulkarni <vandita.kulkarni at intel.com>
Cc: Cooper Chiou <cooper.chiou at intel.com>
Cc: William Tseng <william.tseng at intel.com>
Signed-off-by: Lee Shawn C <shawn.c.lee at intel.com>
---
 .../drm/i915/display/intel_dsi_dcs_backlight.c    | 15 +++++++++------
 1 file changed, 9 insertions(+), 6 deletions(-)

diff --git a/drivers/gpu/drm/i915/display/intel_dsi_dcs_backlight.c b/drivers/gpu/drm/i915/display/intel_dsi_dcs_backlight.c
index 21ab9e1acb57..722411b5cb21 100644
--- a/drivers/gpu/drm/i915/display/intel_dsi_dcs_backlight.c
+++ b/drivers/gpu/drm/i915/display/intel_dsi_dcs_backlight.c
@@ -47,33 +47,36 @@ static u32 dcs_get_backlight(struct intel_connector *connector, enum pipe unused
 {
 	struct intel_encoder *encoder = intel_attached_encoder(connector);
 	struct intel_dsi *intel_dsi = enc_to_intel_dsi(encoder);
+	struct intel_panel *panel = &connector->panel;
 	struct mipi_dsi_device *dsi_device;
-	u8 data = 0;
+	u8 data[2] = {0, 0};
 	enum port port;
 
 	/* FIXME: Need to take care of 16 bit brightness level */
 	for_each_dsi_port(port, intel_dsi->dcs_backlight_ports) {
 		dsi_device = intel_dsi->dsi_hosts[port]->device;
 		mipi_dsi_dcs_read(dsi_device, MIPI_DCS_GET_DISPLAY_BRIGHTNESS,
-				  &data, sizeof(data));
+				  &data,
+				  (panel->backlight.max >> 8) ? sizeof(data) : 1);
 		break;
 	}
 
-	return data;
+	return ((data[1] << 8) | data[0]);
 }
 
 static void dcs_set_backlight(const struct drm_connector_state *conn_state, u32 level)
 {
 	struct intel_dsi *intel_dsi = enc_to_intel_dsi(to_intel_encoder(conn_state->best_encoder));
+	struct intel_panel *panel = &to_intel_connector(conn_state->connector)->panel;
 	struct mipi_dsi_device *dsi_device;
-	u8 data = level;
+	__be16 data = cpu_to_be16(level);
 	enum port port;
 
-	/* FIXME: Need to take care of 16 bit brightness level */
 	for_each_dsi_port(port, intel_dsi->dcs_backlight_ports) {
 		dsi_device = intel_dsi->dsi_hosts[port]->device;
 		mipi_dsi_dcs_write(dsi_device, MIPI_DCS_SET_DISPLAY_BRIGHTNESS,
-				   &data, sizeof(data));
+				   &data,
+				   (panel->backlight.max >> 8) ? sizeof(data) : 1);
 	}
 }
 
-- 
2.17.1