[Intel-gfx] [PATCH 5/5] drm/i915/dsi: Read/write proper brightness value via MIPI DCS command

[Jani Nikula]

On Wed, 01 Sep 2021, Lee Shawn C <shawn.c.lee at intel.com> wrote:
> Driver has to swap the endian before send brightness level value
> to tcon.
>
> v2: Use __be16 instead of u16 to fix sparse warning.
> v3: Send one or two bytes brightness value depend on the precision.
>
> Reported-by: kernel test robot <lkp at intel.com>
> Cc: Ville Syrjala <ville.syrjala at linux.intel.com>
> Cc: Jani Nikula <jani.nikula at linux.intel.com>
> Cc: Vandita Kulkarni <vandita.kulkarni at intel.com>
> Cc: Cooper Chiou <cooper.chiou at intel.com>
> Cc: William Tseng <william.tseng at intel.com>
> Signed-off-by: Lee Shawn C <shawn.c.lee at intel.com>
> ---
>  .../drm/i915/display/intel_dsi_dcs_backlight.c    | 15 +++++++++------
>  1 file changed, 9 insertions(+), 6 deletions(-)
>
> diff --git a/drivers/gpu/drm/i915/display/intel_dsi_dcs_backlight.c b/drivers/gpu/drm/i915/display/intel_dsi_dcs_backlight.c
> index 21ab9e1acb57..722411b5cb21 100644
> --- a/drivers/gpu/drm/i915/display/intel_dsi_dcs_backlight.c
> +++ b/drivers/gpu/drm/i915/display/intel_dsi_dcs_backlight.c
> @@ -47,33 +47,36 @@ static u32 dcs_get_backlight(struct intel_connector *connector, enum pipe unused
>  {
>  	struct intel_encoder *encoder = intel_attached_encoder(connector);
>  	struct intel_dsi *intel_dsi = enc_to_intel_dsi(encoder);
> +	struct intel_panel *panel = &connector->panel;
>  	struct mipi_dsi_device *dsi_device;
> -	u8 data = 0;
> +	u8 data[2] = {0, 0};

	u8 data[2] = {};

>  	enum port port;

	size_t len = panel->backlight.max > U8_MAX ? 2 : 1;

>  
>  	/* FIXME: Need to take care of 16 bit brightness level */
>  	for_each_dsi_port(port, intel_dsi->dcs_backlight_ports) {
>  		dsi_device = intel_dsi->dsi_hosts[port]->device;
>  		mipi_dsi_dcs_read(dsi_device, MIPI_DCS_GET_DISPLAY_BRIGHTNESS,
> -				  &data, sizeof(data));
> +				  &data,
> +				  (panel->backlight.max >> 8) ? sizeof(data) : 1);
>  		break;
>  	}
>  
> -	return data;
> +	return ((data[1] << 8) | data[0]);

Unnecessary braces around the whole thing.

>  }
>  
>  static void dcs_set_backlight(const struct drm_connector_state *conn_state, u32 level)
>  {
>  	struct intel_dsi *intel_dsi = enc_to_intel_dsi(to_intel_encoder(conn_state->best_encoder));
> +	struct intel_panel *panel = &to_intel_connector(conn_state->connector)->panel;
>  	struct mipi_dsi_device *dsi_device;
> -	u8 data = level;
> +	__be16 data = cpu_to_be16(level);

I think it's confusing to use __be16 in set and u8 data[2] in get. Let's
just use u8 data[2] in both. Especially because this one will always
write 0 for len == 1 as it's big-endian data!

You may have to do something like to keep it clear:

	size_t len = panel->backlight.max > U8_MAX ? 2 : 1;

	if (len == 1) {
		data[0] = level;
	} else {
		data[0] = level >> 8;
		data[1] = level;
	}

>  	enum port port;
>  
> -	/* FIXME: Need to take care of 16 bit brightness level */
>  	for_each_dsi_port(port, intel_dsi->dcs_backlight_ports) {
>  		dsi_device = intel_dsi->dsi_hosts[port]->device;
>  		mipi_dsi_dcs_write(dsi_device, MIPI_DCS_SET_DISPLAY_BRIGHTNESS,
> -				   &data, sizeof(data));
> +				   &data,
> +				   (panel->backlight.max >> 8) ? sizeof(data) : 1);
>  	}
>  }

-- 
Jani Nikula, Intel Open Source Graphics Center