[Intel-gfx] [PATCH v3 2/2] drm/i915/intel_combo_phy: Print procmon ref values

[Jani Nikula]

On Tue, 15 Mar 2022, Ankit Nautiyal <ankit.k.nautiyal at intel.com> wrote:
> Add debug print for Procmon Ref values, to help get the
> voltage configurations of combo PHYs.
>
> v2: Used drm_dbg_kms for logs. (Jani)
> Added names for different voltage levels. (Imre)
>
> Suggested-by: Imre Deak <imre.deak at intel.com>
> Signed-off-by: Ankit Nautiyal <ankit.k.nautiyal at intel.com>
> ---
>  .../gpu/drm/i915/display/intel_combo_phy.c    | 36 +++++++++++++------
>  1 file changed, 26 insertions(+), 10 deletions(-)
>
> diff --git a/drivers/gpu/drm/i915/display/intel_combo_phy.c b/drivers/gpu/drm/i915/display/intel_combo_phy.c
> index 4dfe77351b8b..7ccf45578a7f 100644
> --- a/drivers/gpu/drm/i915/display/intel_combo_phy.c
> +++ b/drivers/gpu/drm/i915/display/intel_combo_phy.c
> @@ -25,18 +25,29 @@ enum {
>  };
>  
>  static const struct icl_procmon {
> +	char name[30];

const char * please, and ditch those \0's in the initialization.

>  	u32 dw1, dw9, dw10;
>  } icl_procmon_values[] = {
> -	[PROCMON_0_85V_DOT_0] =
> -		{ .dw1 = 0x00000000, .dw9 = 0x62AB67BB, .dw10 = 0x51914F96, },
> -	[PROCMON_0_95V_DOT_0] =
> -		{ .dw1 = 0x00000000, .dw9 = 0x86E172C7, .dw10 = 0x77CA5EAB, },
> -	[PROCMON_0_95V_DOT_1] =
> -		{ .dw1 = 0x00000000, .dw9 = 0x93F87FE1, .dw10 = 0x8AE871C5, },
> -	[PROCMON_1_05V_DOT_0] =
> -		{ .dw1 = 0x00000000, .dw9 = 0x98FA82DD, .dw10 = 0x89E46DC1, },
> -	[PROCMON_1_05V_DOT_1] =
> -		{ .dw1 = 0x00440000, .dw9 = 0x9A00AB25, .dw10 = 0x8AE38FF1, },
> +	[PROCMON_0_85V_DOT_0] = {
> +		.name = "0.85V dot0 (low-voltage)\0",
> +		.dw1 = 0x00000000, .dw9 = 0x62AB67BB, .dw10 = 0x51914F96,
> +	},
> +	[PROCMON_0_95V_DOT_0] = {
> +		.name = "0.95V dot0\0",
> +		.dw1 = 0x00000000, .dw9 = 0x86E172C7, .dw10 = 0x77CA5EAB,
> +	},
> +	[PROCMON_0_95V_DOT_1] = {
> +		.name = "0.95V dot1\0",
> +		.dw1 = 0x00000000, .dw9 = 0x93F87FE1, .dw10 = 0x8AE871C5,
> +	},
> +	[PROCMON_1_05V_DOT_0] = {
> +		.name = "1.05V dot0\0",
> +		.dw1 = 0x00000000, .dw9 = 0x98FA82DD, .dw10 = 0x89E46DC1,
> +	},
> +	[PROCMON_1_05V_DOT_1] = {
> +		.name = "1.05V dot1\0",
> +		.dw1 = 0x00440000, .dw9 = 0x9A00AB25, .dw10 = 0x8AE38FF1,
> +	},
>  };
>  
>  static const struct icl_procmon *
> @@ -113,6 +124,11 @@ static bool icl_verify_procmon_ref_values(struct drm_i915_private *dev_priv,
>  
>  	procmon = icl_get_procmon_ref_values(dev_priv, phy);
>  
> +	drm_dbg_kms(&dev_priv->drm,
> +		    "Combo PHY %c %s PROCMON values : 0x%x, 0x%x, 0x%x\n",
> +		    phy_name(phy), procmon->name, procmon->dw1, procmon->dw9,
> +		    procmon->dw10);
> +
>  	ret = check_phy_reg(dev_priv, phy, ICL_PORT_COMP_DW1(phy),
>  			    (0xff << 16) | 0xff, procmon->dw1);
>  	ret &= check_phy_reg(dev_priv, phy, ICL_PORT_COMP_DW9(phy),

-- 
Jani Nikula, Intel Open Source Graphics Center