[Intel-gfx] [PATCH] drm/i915/display/: Refactor hsw_crtc_enable for bigjoiner cleanup
Ville Syrjälä
ville.syrjala at linux.intel.com
Thu Mar 17 19:14:16 UTC 2022
On Thu, Mar 17, 2022 at 12:05:47PM -0700, Navare, Manasi wrote:
> On Thu, Mar 17, 2022 at 08:52:52PM +0200, Ville Syrjälä wrote:
> > On Tue, Mar 15, 2022 at 04:38:56PM -0700, Manasi Navare wrote:
> > > This patch abstracts pieces of hsw_crtc_enable corresponding to different
> > > Bspec enable sequence steps into separate functions.
> > > This helps to call them in a specific order for bigjoiner master/slave
> > > in a cleaner fashion.
> > >
> > > Cc: Ville Syrjälä <ville.syrjala at linux.intel.com>
> > > Cc: Animesh Manna <animesh.manna at intel.com>
> > > Signed-off-by: Manasi Navare <manasi.d.navare at intel.com>
> > > ---
> > > drivers/gpu/drm/i915/display/intel_display.c | 125 ++++++++++---------
> > > 1 file changed, 66 insertions(+), 59 deletions(-)
> > >
> > > diff --git a/drivers/gpu/drm/i915/display/intel_display.c b/drivers/gpu/drm/i915/display/intel_display.c
> > > index eb49973621f0..d8e6466c9fa0 100644
> > > --- a/drivers/gpu/drm/i915/display/intel_display.c
> > > +++ b/drivers/gpu/drm/i915/display/intel_display.c
> > > @@ -1865,24 +1865,6 @@ static void hsw_set_frame_start_delay(const struct intel_crtc_state *crtc_state)
> > > intel_de_write(dev_priv, reg, val);
> > > }
> > >
> > > -static void icl_ddi_bigjoiner_pre_enable(struct intel_atomic_state *state,
> > > - const struct intel_crtc_state *crtc_state)
> > > -{
> > > - struct intel_crtc *master_crtc = intel_master_crtc(crtc_state);
> > > -
> > > - /*
> > > - * Enable sequence steps 1-7 on bigjoiner master
> > > - */
> > > - if (intel_crtc_is_bigjoiner_slave(crtc_state))
> > > - intel_encoders_pre_pll_enable(state, master_crtc);
> > > -
> > > - if (crtc_state->shared_dpll)
> > > - intel_enable_shared_dpll(crtc_state);
> > > -
> > > - if (intel_crtc_is_bigjoiner_slave(crtc_state))
> > > - intel_encoders_pre_enable(state, master_crtc);
> > > -}
> > > -
> > > static void hsw_configure_cpu_transcoder(const struct intel_crtc_state *crtc_state)
> > > {
> > > struct intel_crtc *crtc = to_intel_crtc(crtc_state->uapi.crtc);
> > > @@ -1910,70 +1892,73 @@ static void hsw_configure_cpu_transcoder(const struct intel_crtc_state *crtc_sta
> > > hsw_set_transconf(crtc_state);
> > > }
> > >
> > > -static void hsw_crtc_enable(struct intel_atomic_state *state,
> > > - struct intel_crtc *crtc)
> > > +static void hsw_crtc_pre_pll_enable(struct intel_atomic_state *state,
> > > + const struct intel_crtc_state *crtc_state)
> > > {
> > > - const struct intel_crtc_state *new_crtc_state =
> > > - intel_atomic_get_new_crtc_state(state, crtc);
> > > - struct drm_i915_private *dev_priv = to_i915(crtc->base.dev);
> > > - enum pipe pipe = crtc->pipe, hsw_workaround_pipe;
> > > - enum transcoder cpu_transcoder = new_crtc_state->cpu_transcoder;
> > > - bool psl_clkgate_wa;
> > > -
> > > - if (drm_WARN_ON(&dev_priv->drm, crtc->active))
> > > - return;
> > > + struct intel_crtc *crtc = to_intel_crtc(crtc_state->uapi.crtc);
> > >
> > > - if (!new_crtc_state->bigjoiner_pipes) {
> > > - intel_encoders_pre_pll_enable(state, crtc);
> > > + /*
> > > + * Enable sequence steps 1 - 7 on all pipes
> > > + */
> > > + intel_encoders_pre_pll_enable(state, crtc);
> > > + if (crtc_state->shared_dpll)
> > > + intel_enable_shared_dpll(crtc_state);
> > >
> > > - if (new_crtc_state->shared_dpll)
> > > - intel_enable_shared_dpll(new_crtc_state);
> > > + intel_encoders_pre_enable(state, crtc);
> > > +}
> > >
> > > - intel_encoders_pre_enable(state, crtc);
> > > - } else {
> > > - icl_ddi_bigjoiner_pre_enable(state, new_crtc_state);
> > > - }
> > > +static void hsw_crtc_post_pll_enable(struct intel_atomic_state *state,
> > > + const struct intel_crtc_state *crtc_state)
> > > +{
> > > + struct intel_crtc *crtc = to_intel_crtc(crtc_state->uapi.crtc);
> > > + struct drm_i915_private *dev_priv = to_i915(crtc->base.dev);
> > > + enum pipe pipe = crtc->pipe, hsw_workaround_pipe;
> > > + enum transcoder cpu_transcoder = crtc_state->cpu_transcoder;
> > > + bool psl_clkgate_wa;
> > >
> > > - intel_dsc_enable(new_crtc_state);
> > > + /*
> > > + * Enable sequence step 8
> > > + */
> > > + intel_dsc_enable(crtc_state);
> > >
> > > if (DISPLAY_VER(dev_priv) >= 13)
> > > - intel_uncompressed_joiner_enable(new_crtc_state);
> > > + intel_uncompressed_joiner_enable(crtc_state);
> > >
> > > - intel_set_pipe_src_size(new_crtc_state);
> > > + intel_set_pipe_src_size(crtc_state);
> > > if (DISPLAY_VER(dev_priv) >= 9 || IS_BROADWELL(dev_priv))
> > > - bdw_set_pipemisc(new_crtc_state);
> > > + bdw_set_pipemisc(crtc_state);
> > >
> > > - if (!intel_crtc_is_bigjoiner_slave(new_crtc_state) &&
> > > + if (!intel_crtc_is_bigjoiner_slave(crtc_state) &&
> > > !transcoder_is_dsi(cpu_transcoder))
> > > - hsw_configure_cpu_transcoder(new_crtc_state);
> > > + hsw_configure_cpu_transcoder(crtc_state);
> > >
> > > crtc->active = true;
> > >
> > > /* Display WA #1180: WaDisableScalarClockGating: glk */
> > > psl_clkgate_wa = DISPLAY_VER(dev_priv) == 10 &&
> > > - new_crtc_state->pch_pfit.enabled;
> > > + crtc_state->pch_pfit.enabled;
> > > if (psl_clkgate_wa)
> > > glk_pipe_scaler_clock_gating_wa(dev_priv, pipe, true);
> > >
> > > if (DISPLAY_VER(dev_priv) >= 9)
> > > - skl_pfit_enable(new_crtc_state);
> > > + skl_pfit_enable(crtc_state);
> > > else
> > > - ilk_pfit_enable(new_crtc_state);
> > > + ilk_pfit_enable(crtc_state);
> > >
> > > /*
> > > * On ILK+ LUT must be loaded before the pipe is running but with
> > > * clocks enabled
> > > */
> > > - intel_color_load_luts(new_crtc_state);
> > > - intel_color_commit(new_crtc_state);
> > > + intel_color_load_luts(crtc_state);
> > > + intel_color_commit(crtc_state);
> > > /* update DSPCNTR to configure gamma/csc for pipe bottom color */
> > > if (DISPLAY_VER(dev_priv) < 9)
> > > - intel_disable_primary_plane(new_crtc_state);
> > > + intel_disable_primary_plane(crtc_state);
> > >
> > > - hsw_set_linetime_wm(new_crtc_state);
> > > + hsw_set_linetime_wm(crtc_state);
> > >
> > > if (DISPLAY_VER(dev_priv) >= 11)
> > > - icl_set_pipe_chicken(new_crtc_state);
> > > + icl_set_pipe_chicken(crtc_state);
> > >
> > > intel_initial_watermarks(state, crtc);
> > >
> > > @@ -1984,8 +1969,8 @@ static void hsw_crtc_enable(struct intel_atomic_state *state,
> > > icl_pipe_mbus_enable(crtc, dbuf_state->joined_mbus);
> > > }
> > >
> > > - if (intel_crtc_is_bigjoiner_slave(new_crtc_state))
> > > - intel_crtc_vblank_on(new_crtc_state);
> > > + if (intel_crtc_is_bigjoiner_slave(crtc_state))
> > > + intel_crtc_vblank_on(crtc_state);
> > >
> > > intel_encoders_enable(state, crtc);
> > >
> > > @@ -1996,7 +1981,7 @@ static void hsw_crtc_enable(struct intel_atomic_state *state,
> > >
> > > /* If we change the relative order between pipe/planes enabling, we need
> > > * to change the workaround. */
> > > - hsw_workaround_pipe = new_crtc_state->hsw_workaround_pipe;
> > > + hsw_workaround_pipe = crtc_state->hsw_workaround_pipe;
> > > if (IS_HASWELL(dev_priv) && hsw_workaround_pipe != INVALID_PIPE) {
> > > struct intel_crtc *wa_crtc;
> > >
> > > @@ -2007,6 +1992,29 @@ static void hsw_crtc_enable(struct intel_atomic_state *state,
> > > }
> > > }
> > >
> > > +static void hsw_crtc_enable(struct intel_atomic_state *state,
> > > + struct intel_crtc *crtc)
> > > +{
> > > + const struct intel_crtc_state *new_crtc_state =
> > > + intel_atomic_get_new_crtc_state(state, crtc);
> > > + struct intel_crtc *slave_crtc;
> > > + struct drm_i915_private *dev_priv = to_i915(crtc->base.dev);
> > > +
> > > + if (drm_WARN_ON(&dev_priv->drm, crtc->active))
> > > + return;
> > > +
> > > + hsw_crtc_pre_pll_enable(state, new_crtc_state);
> > > +
> > > + for_each_intel_crtc_in_pipe_mask(&dev_priv->drm, slave_crtc,
> > > + intel_crtc_bigjoiner_slave_pipes(new_crtc_state)) {
> > > + struct intel_crtc_state *slave_crtc_state =
> > > + intel_atomic_get_new_crtc_state(state, slave_crtc);
> > > +
> > > + hsw_crtc_post_pll_enable(state, slave_crtc_state);
> > > + }
> > > + hsw_crtc_post_pll_enable(state, new_crtc_state);
> > > +}
> >
> > I suspect this is far too high level for bigjoiner. Eg. there's a bunch
> > of things already in the disable sequence that seem to need much more
> > low level sequencing between the joined pipes. So my gut feeling still
> > is that we want to continue the per-pipe vs. per-transcoder split and
> > do the joiner loops in lower level code.
> >
>
> But for enable sequence upto all pre_pll_enable needs to happen for master and then post_pll_enable for all slaves first and then master.
We want the enable and disable to be as symmetric as possible. So you
can't just blindly stare at the enable sequence and ignore what's going
on in the disable sequence. Otherwise the end result will be a confusing
mess.
> Hence added the sequencing here. Because like I have split here the post_pll_enable covers Bspec step 8 and hence that needs to happen for all
> slaves first and then master.
> I believe this cleans up a lot of bigjoiner special casing.
>
> Further like Jani said, I can just make a separate icl_crtc_enable hook and only that will have this sequence.
That doesn't seem particularly helpful if it just means copy-pasting
the whole hsw_crtc_enable() into two places and removing one or two
little things from the original.
>
> Does this make sense as a first refacoring step? This should to scale the code to multiple joiners.
>
> Manasi
>
> > > +
> > > void ilk_pfit_disable(const struct intel_crtc_state *old_crtc_state)
> > > {
> > > struct intel_crtc *crtc = to_intel_crtc(old_crtc_state->uapi.crtc);
> > > @@ -8122,11 +8130,11 @@ static void intel_enable_crtc(struct intel_atomic_state *state,
> > >
> > > intel_crtc_update_active_timings(new_crtc_state);
> > >
> > > - dev_priv->display->crtc_enable(state, crtc);
> > > -
> > > if (intel_crtc_is_bigjoiner_slave(new_crtc_state))
> > > return;
> > >
> > > + dev_priv->display->crtc_enable(state, crtc);
> > > +
> > > intel_drrs_enable(new_crtc_state);
> > >
> > > /* vblanks work again, re-enable pipe CRC. */
> > > @@ -8360,8 +8368,7 @@ static void skl_commit_modeset_enables(struct intel_atomic_state *state)
> > > continue;
> > >
> > > if (intel_dp_mst_is_slave_trans(new_crtc_state) ||
> > > - is_trans_port_sync_master(new_crtc_state) ||
> > > - intel_crtc_is_bigjoiner_master(new_crtc_state))
> > > + is_trans_port_sync_master(new_crtc_state))
> > > continue;
> > >
> > > modeset_pipes &= ~BIT(pipe);
> > > @@ -8371,7 +8378,7 @@ static void skl_commit_modeset_enables(struct intel_atomic_state *state)
> > >
> > > /*
> > > * Then we enable all remaining pipes that depend on other
> > > - * pipes: MST slaves and port sync masters, big joiner master
> > > + * pipes: MST slaves and port sync masters
> > > */
> > > for_each_new_intel_crtc_in_state(state, crtc, new_crtc_state, i) {
> > > enum pipe pipe = crtc->pipe;
> > > --
> > > 2.19.1
> >
> > --
> > Ville Syrjälä
> > Intel
--
Ville Syrjälä
Intel
More information about the Intel-gfx
mailing list