[Intel-gfx] [PATCH v3 10/14] drm/i915/uncore: Add GSI offset to uncore
Matt Roper
matthew.d.roper at intel.com
Thu Sep 8 22:29:59 UTC 2022
On Thu, Sep 08, 2022 at 02:16:27PM -0700, Ceraolo Spurio, Daniele wrote:
>
>
> On 9/6/2022 4:49 PM, Matt Roper wrote:
> > GT non-engine registers (referred to as "GSI" registers by the spec)
> > have the same relative offsets on standalone media as they do on the
> > primary GT, just with an additional "GSI offset" added to their MMIO
> > address. If we store this GSI offset in the standalone media's
> > intel_uncore structure, it can be automatically applied to all GSI reg
> > reads/writes that happen on that GT, allowing us to re-use our existing
> > GT code with minimal changes.
> >
> > Forcewake and shadowed register tables for the media GT (which will be
> > added in a future patch) are listed as final addresses that already
> > include the GSI offset, so we also need to add the GSI offset before
> > doing lookups of registers in one of those tables.
> >
> > Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio at intel.com>
> > Signed-off-by: Matt Roper <matthew.d.roper at intel.com>
> > ---
> > drivers/gpu/drm/i915/gt/intel_gt_types.h | 1 +
> > drivers/gpu/drm/i915/intel_uncore.c | 10 ++++++++--
> > drivers/gpu/drm/i915/intel_uncore.h | 22 ++++++++++++++++++++--
> > 3 files changed, 29 insertions(+), 4 deletions(-)
> >
> > diff --git a/drivers/gpu/drm/i915/gt/intel_gt_types.h b/drivers/gpu/drm/i915/gt/intel_gt_types.h
> > index 0e139f7d75ed..82dc28643572 100644
> > --- a/drivers/gpu/drm/i915/gt/intel_gt_types.h
> > +++ b/drivers/gpu/drm/i915/gt/intel_gt_types.h
> > @@ -274,6 +274,7 @@ struct intel_gt_definition {
> > enum intel_gt_type type;
> > char *name;
> > u32 mapping_base;
> > + u32 gsi_offset;
> > intel_engine_mask_t engine_mask;
> > };
> > diff --git a/drivers/gpu/drm/i915/intel_uncore.c b/drivers/gpu/drm/i915/intel_uncore.c
> > index 452b3a31e965..5cd423c7b646 100644
> > --- a/drivers/gpu/drm/i915/intel_uncore.c
> > +++ b/drivers/gpu/drm/i915/intel_uncore.c
> > @@ -928,6 +928,9 @@ find_fw_domain(struct intel_uncore *uncore, u32 offset)
> > {
> > const struct intel_forcewake_range *entry;
> > + if (IS_GSI_REG(offset))
> > + offset += uncore->gsi_offset;
> > +
> > entry = BSEARCH(offset,
> > uncore->fw_domains_table,
> > uncore->fw_domains_table_entries,
> > @@ -1143,6 +1146,9 @@ static bool is_shadowed(struct intel_uncore *uncore, u32 offset)
> > if (drm_WARN_ON(&uncore->i915->drm, !uncore->shadowed_reg_table))
> > return false;
> > + if (IS_GSI_REG(offset))
> > + offset += uncore->gsi_offset;
> > +
> > return BSEARCH(offset,
> > uncore->shadowed_reg_table,
> > uncore->shadowed_reg_table_entries,
> > @@ -1995,8 +2001,8 @@ static int __fw_domain_init(struct intel_uncore *uncore,
> > d->uncore = uncore;
> > d->wake_count = 0;
> > - d->reg_set = uncore->regs + i915_mmio_reg_offset(reg_set);
> > - d->reg_ack = uncore->regs + i915_mmio_reg_offset(reg_ack);
> > + d->reg_set = uncore->regs + i915_mmio_reg_offset(reg_set) + uncore->gsi_offset;
> > + d->reg_ack = uncore->regs + i915_mmio_reg_offset(reg_ack) + uncore->gsi_offset;
> > d->id = domain_id;
> > diff --git a/drivers/gpu/drm/i915/intel_uncore.h b/drivers/gpu/drm/i915/intel_uncore.h
> > index 4acb78a03233..7f1d7903a8f3 100644
> > --- a/drivers/gpu/drm/i915/intel_uncore.h
> > +++ b/drivers/gpu/drm/i915/intel_uncore.h
> > @@ -136,6 +136,16 @@ struct intel_uncore {
> > spinlock_t lock; /** lock is also taken in irq contexts. */
> > + /*
> > + * Do we need to apply an additional offset to reach the beginning
> > + * of the basic non-engine GT registers (referred to as "GSI" on
> > + * newer platforms, or "GT block" on older platforms)? If so, we'll
> > + * track that here and apply it transparently to registers in the
> > + * appropriate range to maintain compatibility with our existing
> > + * register definitions and GT code.
> > + */
> > + u32 gsi_offset;
> > +
> > unsigned int flags;
> > #define UNCORE_HAS_FORCEWAKE BIT(0)
> > #define UNCORE_HAS_FPGA_DBG_UNCLAIMED BIT(1)
> > @@ -294,19 +304,27 @@ intel_wait_for_register_fw(struct intel_uncore *uncore,
> > 2, timeout_ms, NULL);
> > }
> > +#define IS_GSI_REG(reg) ((reg) < 0x40000)
> > +
> > /* register access functions */
> > #define __raw_read(x__, s__) \
> > static inline u##x__ __raw_uncore_read##x__(const struct intel_uncore *uncore, \
> > i915_reg_t reg) \
> > { \
> > - return read##s__(uncore->regs + i915_mmio_reg_offset(reg)); \
> > + u32 offset = i915_mmio_reg_offset(reg); \
> > + if (IS_GSI_REG(offset)) \
> > + offset += uncore->gsi_offset; \
> > + return read##s__(uncore->regs + offset); \
> > }
> > #define __raw_write(x__, s__) \
> > static inline void __raw_uncore_write##x__(const struct intel_uncore *uncore, \
> > i915_reg_t reg, u##x__ val) \
> > { \
> > - write##s__(val, uncore->regs + i915_mmio_reg_offset(reg)); \
> > + u32 offset = i915_mmio_reg_offset(reg); \
> > + if (IS_GSI_REG(offset)) \
> > + offset += uncore->gsi_offset; \
> > + write##s__(val, uncore->regs + offset); \
> > }
> > __raw_read(8, b)
> > __raw_read(16, w)
>
>
> Do we also need to update the raw_reg_<read/write> macros at the bottom of
> this file? Those seem to currently only be used for irq regs (which are
> outside the GSI range), so not structly required, but if we decide to not
> update them we should at least add a comment.
>
> I'm also not sure why those macros exist to begin with as they're basically
> equivalent to __raw_uncore_<read/write>32, with the only difference being
> that uncore->regs is de-referenced outside the macro.
Good point; I forgot those existed. According to git history, the original
justification when they were introduced was that the compiler wasn't caching
uncore->regs inside a register, so it resulted in unnecessary extra load
instructions in the interrupt handlers. I'm not sure how important that
micro-optimization is, but I replaced them all as an experiment to see if the
claim still holds true with recent compilers and it seems it does:
$ ./scripts/bloat-o-meter i915.ko.{orig,new}
add/remove: 0/0 grow/shrink: 8/3 up/down: 275/-121 (154)
Function old new delta
gen11_gt_engine_identity 210 280 +70
dg1_irq_handler 279 329 +50
gen11_irq_handler 208 247 +39
gen8_gt_irq_handler 363 392 +29
intel_irq_reset 1225 1252 +27
gen11_gt_reset_one_iir 143 170 +27
gen8_irq_handler 166 185 +19
gen11_display_irq_handler 69 83 +14
ilk_irq_handler.cold 72 63 -9
gen11_gt_irq_handler 756 736 -20
ilk_irq_handler 2663 2571 -92
Total: Before=2481127, After=2481281, chg +0.01%
So given that these macros are only used in places where we don't expect
to be operating on GSI registers, and the goal was to avoid unnecessary
instructions, I think adding a comment is probably the way to go. If
there's ever a need to use these on GSI registers in the future, then it
will be the caller's responsibility to take care of adding the GSI
offset to the 'base' parameter.
I'll send an updated version that includes a comment.
Matt
>
> Daniele
>
>
--
Matt Roper
Graphics Software Engineer
VTT-OSGC Platform Enablement
Intel Corporation
More information about the Intel-gfx
mailing list