[Intel-gfx] [PATCH v2 5/5] drm/i915/dg2: Drop Wa_16011777198

[Matt Roper]

Wa_16011777198 only applies to pre-production steppings of DG2, which
we're no longer supporting.  Remove the workaround and override_gucrc
handling, which is no longer needed.  Since this was the final use of
IS_DG2_GRAPHICS_STEP, that macro can also be removed now.

Cc: Ashutosh Dixit <ashutosh.dixit at intel.com>
Cc: Vinay Belgaumkar <vinay.belgaumkar at intel.com>
Cc: Umesh Nerlige Ramappa <umesh.nerlige.ramappa at intel.com>
Signed-off-by: Matt Roper <matthew.d.roper at intel.com>
---
 drivers/gpu/drm/i915/i915_drv.h        | 19 ---------------
 drivers/gpu/drm/i915/i915_perf.c       | 32 --------------------------
 drivers/gpu/drm/i915/i915_perf_types.h |  6 -----
 3 files changed, 57 deletions(-)

diff --git a/drivers/gpu/drm/i915/i915_drv.h b/drivers/gpu/drm/i915/i915_drv.h
index 7f8fa0eb9dc6..d4568e31b777 100644
--- a/drivers/gpu/drm/i915/i915_drv.h
+++ b/drivers/gpu/drm/i915/i915_drv.h
@@ -670,25 +670,6 @@ IS_SUBPLATFORM(const struct drm_i915_private *i915,
 	(IS_METEORLAKE(__i915) && \
 	 IS_MEDIA_STEP(__i915, since, until))
 
-/*
- * DG2 hardware steppings are a bit unusual.  The hardware design was forked to
- * create three variants (G10, G11, and G12) which each have distinct
- * workaround sets.  The G11 and G12 forks of the DG2 design reset the GT
- * stepping back to "A0" for their first iterations, even though they're more
- * similar to a G10 B0 stepping and G10 C0 stepping respectively in terms of
- * functionality and workarounds.  However the display stepping does not reset
- * in the same manner --- a specific stepping like "B0" has a consistent
- * meaning regardless of whether it belongs to a G10, G11, or G12 DG2.
- *
- * TLDR:  All GT workarounds and stepping-specific logic must be applied in
- * relation to a specific subplatform (G10/G11/G12), whereas display workarounds
- * and stepping-specific logic will be applied with a general DG2-wide stepping
- * number.
- */
-#define IS_DG2_GRAPHICS_STEP(__i915, variant, since, until) \
-	(IS_SUBPLATFORM(__i915, INTEL_DG2, INTEL_SUBPLATFORM_##variant) && \
-	 IS_GRAPHICS_STEP(__i915, since, until))
-
 #define IS_PVC_BD_STEP(__i915, since, until) \
 	(IS_PONTEVECCHIO(__i915) && \
 	 IS_BASEDIE_STEP(__i915, since, until))
diff --git a/drivers/gpu/drm/i915/i915_perf.c b/drivers/gpu/drm/i915/i915_perf.c
index 04bc1f4a1115..dfe7eff7d1a1 100644
--- a/drivers/gpu/drm/i915/i915_perf.c
+++ b/drivers/gpu/drm/i915/i915_perf.c
@@ -1675,13 +1675,6 @@ static void i915_oa_stream_destroy(struct i915_perf_stream *stream)
 
 	free_oa_buffer(stream);
 
-	/*
-	 * Wa_16011777198:dg2: Unset the override of GUCRC mode to enable rc6.
-	 */
-	if (stream->override_gucrc)
-		drm_WARN_ON(&gt->i915->drm,
-			    intel_guc_slpc_unset_gucrc_mode(&gt->uc.guc.slpc));
-
 	intel_uncore_forcewake_put(stream->uncore, FORCEWAKE_ALL);
 	intel_engine_pm_put(stream->engine);
 
@@ -3272,7 +3265,6 @@ static int i915_oa_stream_init(struct i915_perf_stream *stream,
 	struct drm_i915_private *i915 = stream->perf->i915;
 	struct i915_perf *perf = stream->perf;
 	struct i915_perf_group *g;
-	struct intel_gt *gt;
 	int ret;
 
 	if (!props->engine) {
@@ -3280,7 +3272,6 @@ static int i915_oa_stream_init(struct i915_perf_stream *stream,
 			"OA engine not specified\n");
 		return -EINVAL;
 	}
-	gt = props->engine->gt;
 	g = props->engine->oa_group;
 
 	/*
@@ -3381,25 +3372,6 @@ static int i915_oa_stream_init(struct i915_perf_stream *stream,
 	intel_engine_pm_get(stream->engine);
 	intel_uncore_forcewake_get(stream->uncore, FORCEWAKE_ALL);
 
-	/*
-	 * Wa_16011777198:dg2: GuC resets render as part of the Wa. This causes
-	 * OA to lose the configuration state. Prevent this by overriding GUCRC
-	 * mode.
-	 */
-	if (intel_uc_uses_guc_rc(&gt->uc) &&
-	    (IS_DG2_GRAPHICS_STEP(gt->i915, G10, STEP_A0, STEP_C0) ||
-	     IS_DG2_GRAPHICS_STEP(gt->i915, G11, STEP_A0, STEP_B0))) {
-		ret = intel_guc_slpc_override_gucrc_mode(&gt->uc.guc.slpc,
-							 SLPC_GUCRC_MODE_GUCRC_NO_RC6);
-		if (ret) {
-			drm_dbg(&stream->perf->i915->drm,
-				"Unable to override gucrc mode\n");
-			goto err_gucrc;
-		}
-
-		stream->override_gucrc = true;
-	}
-
 	ret = alloc_oa_buffer(stream);
 	if (ret)
 		goto err_oa_buf_alloc;
@@ -3436,10 +3408,6 @@ static int i915_oa_stream_init(struct i915_perf_stream *stream,
 	free_oa_buffer(stream);
 
 err_oa_buf_alloc:
-	if (stream->override_gucrc)
-		intel_guc_slpc_unset_gucrc_mode(&gt->uc.guc.slpc);
-
-err_gucrc:
 	intel_uncore_forcewake_put(stream->uncore, FORCEWAKE_ALL);
 	intel_engine_pm_put(stream->engine);
 
diff --git a/drivers/gpu/drm/i915/i915_perf_types.h b/drivers/gpu/drm/i915/i915_perf_types.h
index fe3a5dae8c22..13b1ae9b96c7 100644
--- a/drivers/gpu/drm/i915/i915_perf_types.h
+++ b/drivers/gpu/drm/i915/i915_perf_types.h
@@ -338,12 +338,6 @@ struct i915_perf_stream {
 	 * buffer should be checked for available data.
 	 */
 	u64 poll_oa_period;
-
-	/**
-	 * @override_gucrc: GuC RC has been overridden for the perf stream,
-	 * and we need to restore the default configuration on release.
-	 */
-	bool override_gucrc;
 };
 
 /**
-- 
2.41.0