[Intel-gfx] [PATCH 2/6] drm/i915/display: use drm_edid_is_digital()
Jani Nikula
jani.nikula at intel.com
Thu Aug 24 13:46:03 UTC 2023
Reduce the use of struct edid and drm_edid_raw().
Signed-off-by: Jani Nikula <jani.nikula at intel.com>
---
drivers/gpu/drm/i915/display/intel_crt.c | 11 ++++-------
drivers/gpu/drm/i915/display/intel_hdmi.c | 9 ++++-----
drivers/gpu/drm/i915/display/intel_sdvo.c | 7 ++-----
3 files changed, 10 insertions(+), 17 deletions(-)
diff --git a/drivers/gpu/drm/i915/display/intel_crt.c b/drivers/gpu/drm/i915/display/intel_crt.c
index f66340b4caf0..310670bb6c25 100644
--- a/drivers/gpu/drm/i915/display/intel_crt.c
+++ b/drivers/gpu/drm/i915/display/intel_crt.c
@@ -657,21 +657,18 @@ static bool intel_crt_detect_ddc(struct drm_connector *connector)
drm_edid = intel_crt_get_edid(connector, i2c);
if (drm_edid) {
- const struct edid *edid = drm_edid_raw(drm_edid);
- bool is_digital = edid->input & DRM_EDID_INPUT_DIGITAL;
-
/*
* This may be a DVI-I connector with a shared DDC
* link between analog and digital outputs, so we
* have to check the EDID input spec of the attached device.
*/
- if (!is_digital) {
+ if (drm_edid_is_digital(drm_edid)) {
drm_dbg_kms(&dev_priv->drm,
- "CRT detected via DDC:0x50 [EDID]\n");
- ret = true;
+ "CRT not detected via DDC:0x50 [EDID reports a digital panel]\n");
} else {
drm_dbg_kms(&dev_priv->drm,
- "CRT not detected via DDC:0x50 [EDID reports a digital panel]\n");
+ "CRT detected via DDC:0x50 [EDID]\n");
+ ret = true;
}
} else {
drm_dbg_kms(&dev_priv->drm,
diff --git a/drivers/gpu/drm/i915/display/intel_hdmi.c b/drivers/gpu/drm/i915/display/intel_hdmi.c
index 9442bf43550e..aa9915098dda 100644
--- a/drivers/gpu/drm/i915/display/intel_hdmi.c
+++ b/drivers/gpu/drm/i915/display/intel_hdmi.c
@@ -2452,7 +2452,6 @@ intel_hdmi_set_edid(struct drm_connector *connector)
struct intel_hdmi *intel_hdmi = intel_attached_hdmi(to_intel_connector(connector));
intel_wakeref_t wakeref;
const struct drm_edid *drm_edid;
- const struct edid *edid;
bool connected = false;
struct i2c_adapter *i2c;
@@ -2475,9 +2474,7 @@ intel_hdmi_set_edid(struct drm_connector *connector)
to_intel_connector(connector)->detect_edid = drm_edid;
- /* FIXME: Get rid of drm_edid_raw() */
- edid = drm_edid_raw(drm_edid);
- if (edid && edid->input & DRM_EDID_INPUT_DIGITAL) {
+ if (drm_edid_is_digital(drm_edid)) {
intel_hdmi_dp_dual_mode_detect(connector);
connected = true;
@@ -2485,7 +2482,9 @@ intel_hdmi_set_edid(struct drm_connector *connector)
intel_display_power_put(dev_priv, POWER_DOMAIN_GMBUS, wakeref);
- cec_notifier_set_phys_addr_from_edid(intel_hdmi->cec_notifier, edid);
+ /* FIXME: Get rid of drm_edid_raw() */
+ cec_notifier_set_phys_addr_from_edid(intel_hdmi->cec_notifier,
+ drm_edid_raw(drm_edid));
return connected;
}
diff --git a/drivers/gpu/drm/i915/display/intel_sdvo.c b/drivers/gpu/drm/i915/display/intel_sdvo.c
index 7d25a64698e2..917771e19e38 100644
--- a/drivers/gpu/drm/i915/display/intel_sdvo.c
+++ b/drivers/gpu/drm/i915/display/intel_sdvo.c
@@ -2094,10 +2094,8 @@ intel_sdvo_tmds_sink_detect(struct drm_connector *connector)
status = connector_status_unknown;
if (drm_edid) {
- const struct edid *edid = drm_edid_raw(drm_edid);
-
/* DDC bus is shared, match EDID to connector type */
- if (edid && edid->input & DRM_EDID_INPUT_DIGITAL)
+ if (drm_edid_is_digital(drm_edid))
status = connector_status_connected;
else
status = connector_status_disconnected;
@@ -2111,8 +2109,7 @@ static bool
intel_sdvo_connector_matches_edid(struct intel_sdvo_connector *sdvo,
const struct drm_edid *drm_edid)
{
- const struct edid *edid = drm_edid_raw(drm_edid);
- bool monitor_is_digital = !!(edid->input & DRM_EDID_INPUT_DIGITAL);
+ bool monitor_is_digital = drm_edid_is_digital(drm_edid);
bool connector_is_digital = !!IS_DIGITAL(sdvo);
DRM_DEBUG_KMS("connector_is_digital? %d, monitor_is_digital? %d\n",
--
2.39.2
More information about the Intel-gfx
mailing list