[Intel-gfx] [PATCH 2/6] drm/i915/display: use drm_edid_is_digital()

[Ville Syrjälä]

On Thu, Aug 24, 2023 at 04:46:03PM +0300, Jani Nikula wrote:
> Reduce the use of struct edid and drm_edid_raw().
> 
> Signed-off-by: Jani Nikula <jani.nikula at intel.com>
> ---
>  drivers/gpu/drm/i915/display/intel_crt.c  | 11 ++++-------
>  drivers/gpu/drm/i915/display/intel_hdmi.c |  9 ++++-----
>  drivers/gpu/drm/i915/display/intel_sdvo.c |  7 ++-----
>  3 files changed, 10 insertions(+), 17 deletions(-)
> 
> diff --git a/drivers/gpu/drm/i915/display/intel_crt.c b/drivers/gpu/drm/i915/display/intel_crt.c
> index f66340b4caf0..310670bb6c25 100644
> --- a/drivers/gpu/drm/i915/display/intel_crt.c
> +++ b/drivers/gpu/drm/i915/display/intel_crt.c
> @@ -657,21 +657,18 @@ static bool intel_crt_detect_ddc(struct drm_connector *connector)
>  	drm_edid = intel_crt_get_edid(connector, i2c);
>  
>  	if (drm_edid) {
> -		const struct edid *edid = drm_edid_raw(drm_edid);
> -		bool is_digital = edid->input & DRM_EDID_INPUT_DIGITAL;
> -
>  		/*
>  		 * This may be a DVI-I connector with a shared DDC
>  		 * link between analog and digital outputs, so we
>  		 * have to check the EDID input spec of the attached device.
>  		 */
> -		if (!is_digital) {
> +		if (drm_edid_is_digital(drm_edid)) {
>  			drm_dbg_kms(&dev_priv->drm,
> -				    "CRT detected via DDC:0x50 [EDID]\n");
> -			ret = true;
> +				    "CRT not detected via DDC:0x50 [EDID reports a digital panel]\n");
>  		} else {
>  			drm_dbg_kms(&dev_priv->drm,
> -				    "CRT not detected via DDC:0x50 [EDID reports a digital panel]\n");
> +				    "CRT detected via DDC:0x50 [EDID]\n");
> +			ret = true;

Inverting the check made the diff a bit confusing, but looks
correct in the end.

Reviewed-by: Ville Syrjälä <ville.syrjala at linux.intel.com>

>  		}
>  	} else {
>  		drm_dbg_kms(&dev_priv->drm,
> diff --git a/drivers/gpu/drm/i915/display/intel_hdmi.c b/drivers/gpu/drm/i915/display/intel_hdmi.c
> index 9442bf43550e..aa9915098dda 100644
> --- a/drivers/gpu/drm/i915/display/intel_hdmi.c
> +++ b/drivers/gpu/drm/i915/display/intel_hdmi.c
> @@ -2452,7 +2452,6 @@ intel_hdmi_set_edid(struct drm_connector *connector)
>  	struct intel_hdmi *intel_hdmi = intel_attached_hdmi(to_intel_connector(connector));
>  	intel_wakeref_t wakeref;
>  	const struct drm_edid *drm_edid;
> -	const struct edid *edid;
>  	bool connected = false;
>  	struct i2c_adapter *i2c;
>  
> @@ -2475,9 +2474,7 @@ intel_hdmi_set_edid(struct drm_connector *connector)
>  
>  	to_intel_connector(connector)->detect_edid = drm_edid;
>  
> -	/* FIXME: Get rid of drm_edid_raw() */
> -	edid = drm_edid_raw(drm_edid);
> -	if (edid && edid->input & DRM_EDID_INPUT_DIGITAL) {
> +	if (drm_edid_is_digital(drm_edid)) {
>  		intel_hdmi_dp_dual_mode_detect(connector);
>  
>  		connected = true;
> @@ -2485,7 +2482,9 @@ intel_hdmi_set_edid(struct drm_connector *connector)
>  
>  	intel_display_power_put(dev_priv, POWER_DOMAIN_GMBUS, wakeref);
>  
> -	cec_notifier_set_phys_addr_from_edid(intel_hdmi->cec_notifier, edid);
> +	/* FIXME: Get rid of drm_edid_raw() */
> +	cec_notifier_set_phys_addr_from_edid(intel_hdmi->cec_notifier,
> +					     drm_edid_raw(drm_edid));
>  
>  	return connected;
>  }
> diff --git a/drivers/gpu/drm/i915/display/intel_sdvo.c b/drivers/gpu/drm/i915/display/intel_sdvo.c
> index 7d25a64698e2..917771e19e38 100644
> --- a/drivers/gpu/drm/i915/display/intel_sdvo.c
> +++ b/drivers/gpu/drm/i915/display/intel_sdvo.c
> @@ -2094,10 +2094,8 @@ intel_sdvo_tmds_sink_detect(struct drm_connector *connector)
>  
>  	status = connector_status_unknown;
>  	if (drm_edid) {
> -		const struct edid *edid = drm_edid_raw(drm_edid);
> -
>  		/* DDC bus is shared, match EDID to connector type */
> -		if (edid && edid->input & DRM_EDID_INPUT_DIGITAL)
> +		if (drm_edid_is_digital(drm_edid))
>  			status = connector_status_connected;
>  		else
>  			status = connector_status_disconnected;
> @@ -2111,8 +2109,7 @@ static bool
>  intel_sdvo_connector_matches_edid(struct intel_sdvo_connector *sdvo,
>  				  const struct drm_edid *drm_edid)
>  {
> -	const struct edid *edid = drm_edid_raw(drm_edid);
> -	bool monitor_is_digital = !!(edid->input & DRM_EDID_INPUT_DIGITAL);
> +	bool monitor_is_digital = drm_edid_is_digital(drm_edid);
>  	bool connector_is_digital = !!IS_DIGITAL(sdvo);
>  
>  	DRM_DEBUG_KMS("connector_is_digital? %d, monitor_is_digital? %d\n",
> -- 
> 2.39.2

-- 
Ville Syrjälä
Intel