[Intel-gfx] [PATCH 2/4] drm/i915: Simplify intel_cx0_program_phy_lane() with loop

[Jani Nikula]

On Tue, 25 Jul 2023, Gustavo Sousa <gustavo.sousa at intel.com> wrote:
> It is possible to generalize the "disable" value for the transmitters to
> be a bit mask based on the port width and the port reversal boolean,
> with a small exception for DP-alt mode with "x1" port width.
>
> Simplify the code by using such a mask and a for-loop instead of using
> switch-case statements.
>
> BSpec: 64539
> Signed-off-by: Gustavo Sousa <gustavo.sousa at intel.com>
> ---
>  drivers/gpu/drm/i915/display/intel_cx0_phy.c | 79 +++++---------------
>  1 file changed, 20 insertions(+), 59 deletions(-)
>
> diff --git a/drivers/gpu/drm/i915/display/intel_cx0_phy.c b/drivers/gpu/drm/i915/display/intel_cx0_phy.c
> index b903ceb0b56a..f10ebdfd696a 100644
> --- a/drivers/gpu/drm/i915/display/intel_cx0_phy.c
> +++ b/drivers/gpu/drm/i915/display/intel_cx0_phy.c
> @@ -2604,7 +2604,8 @@ static void intel_cx0_program_phy_lane(struct drm_i915_private *i915,
>  				       struct intel_encoder *encoder, int lane_count,
>  				       bool lane_reversal)
>  {
> -	u8 l0t1, l0t2, l1t1, l1t2;
> +	int i;
> +	u8 disables;
>  	bool dp_alt_mode = intel_tc_port_in_dp_alt_mode(enc_to_dig_port(encoder));
>  	enum port port = encoder->port;
>  
> @@ -2614,66 +2615,26 @@ static void intel_cx0_program_phy_lane(struct drm_i915_private *i915,
>  			      C10_VDR_CTRL_MSGBUS_ACCESS,
>  			      MB_WRITE_COMMITTED);
>  
> -	/* TODO: DP-alt MFD case where only one PHY lane should be programmed. */
> -	l0t1 = intel_cx0_read(i915, port, INTEL_CX0_LANE0, PHY_CX0_TX_CONTROL(1, 2));
> -	l0t2 = intel_cx0_read(i915, port, INTEL_CX0_LANE0, PHY_CX0_TX_CONTROL(2, 2));
> -	l1t1 = intel_cx0_read(i915, port, INTEL_CX0_LANE1, PHY_CX0_TX_CONTROL(1, 2));
> -	l1t2 = intel_cx0_read(i915, port, INTEL_CX0_LANE1, PHY_CX0_TX_CONTROL(2, 2));
> -
> -	l0t1 |= CONTROL2_DISABLE_SINGLE_TX;
> -	l0t2 |= CONTROL2_DISABLE_SINGLE_TX;
> -	l1t1 |= CONTROL2_DISABLE_SINGLE_TX;
> -	l1t2 |= CONTROL2_DISABLE_SINGLE_TX;
> -
> -	if (lane_reversal) {
> -		switch (lane_count) {
> -		case 4:
> -			l0t1 &= ~CONTROL2_DISABLE_SINGLE_TX;
> -			fallthrough;
> -		case 3:
> -			l0t2 &= ~CONTROL2_DISABLE_SINGLE_TX;
> -			fallthrough;
> -		case 2:
> -			l1t1 &= ~CONTROL2_DISABLE_SINGLE_TX;
> -			fallthrough;
> -		case 1:
> -			l1t2 &= ~CONTROL2_DISABLE_SINGLE_TX;
> -			break;
> -		default:
> -			MISSING_CASE(lane_count);
> -		}
> -	} else {
> -		switch (lane_count) {
> -		case 4:
> -			l1t2 &= ~CONTROL2_DISABLE_SINGLE_TX;
> -			fallthrough;
> -		case 3:
> -			l1t1 &= ~CONTROL2_DISABLE_SINGLE_TX;
> -			fallthrough;
> -		case 2:
> -			l0t2 &= ~CONTROL2_DISABLE_SINGLE_TX;
> -			l0t1 &= ~CONTROL2_DISABLE_SINGLE_TX;
> -			break;
> -		case 1:
> -			if (dp_alt_mode)
> -				l0t2 &= ~CONTROL2_DISABLE_SINGLE_TX;
> -			else
> -				l0t1 &= ~CONTROL2_DISABLE_SINGLE_TX;
> -			break;
> -		default:
> -			MISSING_CASE(lane_count);
> -		}
> +	if (lane_reversal)
> +		disables = REG_GENMASK8(3, 0) >> lane_count;
> +	else
> +		disables = REG_GENMASK8(3, 0) << lane_count;
> +
> +	if (dp_alt_mode && lane_count == 1) {
> +		disables &= ~REG_GENMASK8(1, 0);
> +		disables |= REG_FIELD_PREP8(REG_GENMASK8(1, 0), 0x1);
>  	}
>  
> -	/* disable MLs */
> -	intel_cx0_write(i915, port, INTEL_CX0_LANE0, PHY_CX0_TX_CONTROL(1, 2),
> -			l0t1, MB_WRITE_COMMITTED);
> -	intel_cx0_write(i915, port, INTEL_CX0_LANE0, PHY_CX0_TX_CONTROL(2, 2),
> -			l0t2, MB_WRITE_COMMITTED);
> -	intel_cx0_write(i915, port, INTEL_CX0_LANE1, PHY_CX0_TX_CONTROL(1, 2),
> -			l1t1, MB_WRITE_COMMITTED);
> -	intel_cx0_write(i915, port, INTEL_CX0_LANE1, PHY_CX0_TX_CONTROL(2, 2),
> -			l1t2, MB_WRITE_COMMITTED);
> +	/* TODO: DP-alt MFD case where only one PHY lane should be programmed. */
> +	for (i = 0; i < 4; i++) {
> +		int tx = i % 2 + 1;
> +		u8 lane_mask = i / 2 == 0 ? INTEL_CX0_LANE0 : INTEL_CX0_LANE1;

I'm just catching up on mails and quickly eyeballing stuff, but

	i / 2 == 0

looks suspect.

BR,
Jani.

> +
> +		intel_cx0_rmw(i915, port, lane_mask, PHY_CX0_TX_CONTROL(tx, 2),
> +			      CONTROL2_DISABLE_SINGLE_TX,
> +			      disables & BIT(i) ? CONTROL2_DISABLE_SINGLE_TX : 0,
> +			      MB_WRITE_COMMITTED);
> +	}
>  
>  	if (intel_is_c10phy(i915, intel_port_to_phy(i915, port)))
>  		intel_cx0_rmw(i915, port, INTEL_CX0_BOTH_LANES,

-- 
Jani Nikula, Intel Open Source Graphics Center