[PATCH 3/7] drm/i915/display: convert intel_load_detect.c to struct intel_display

Rodrigo Vivi rodrigo.vivi at intel.com
Thu Aug 15 19:04:25 UTC 2024


On Tue, Aug 13, 2024 at 07:41:19PM +0300, Jani Nikula wrote:
> Going forward, struct intel_display shall replace struct
> drm_i915_private as the main display device data pointer type. Convert
> intel_load_detect.[ch] to struct intel_display.
> 
> Signed-off-by: Jani Nikula <jani.nikula at intel.com>

Reviewed-by: Rodrigo Vivi <rodrigo.vivi at intel.com>

> ---
>  .../gpu/drm/i915/display/intel_load_detect.c  | 27 +++++++++----------
>  1 file changed, 13 insertions(+), 14 deletions(-)
> 
> diff --git a/drivers/gpu/drm/i915/display/intel_load_detect.c b/drivers/gpu/drm/i915/display/intel_load_detect.c
> index d5a0aecf3e8f..b457c69dc0be 100644
> --- a/drivers/gpu/drm/i915/display/intel_load_detect.c
> +++ b/drivers/gpu/drm/i915/display/intel_load_detect.c
> @@ -48,23 +48,22 @@ struct drm_atomic_state *
>  intel_load_detect_get_pipe(struct drm_connector *connector,
>  			   struct drm_modeset_acquire_ctx *ctx)
>  {
> +	struct intel_display *display = to_intel_display(connector->dev);
>  	struct intel_encoder *encoder =
>  		intel_attached_encoder(to_intel_connector(connector));
>  	struct intel_crtc *possible_crtc;
>  	struct intel_crtc *crtc = NULL;
> -	struct drm_device *dev = encoder->base.dev;
> -	struct drm_i915_private *dev_priv = to_i915(dev);
> -	struct drm_mode_config *config = &dev->mode_config;
> +	struct drm_mode_config *config = &display->drm->mode_config;
>  	struct drm_atomic_state *state = NULL, *restore_state = NULL;
>  	struct drm_connector_state *connector_state;
>  	struct intel_crtc_state *crtc_state;
>  	int ret;
>  
> -	drm_dbg_kms(&dev_priv->drm, "[CONNECTOR:%d:%s], [ENCODER:%d:%s]\n",
> +	drm_dbg_kms(display->drm, "[CONNECTOR:%d:%s], [ENCODER:%d:%s]\n",
>  		    connector->base.id, connector->name,
>  		    encoder->base.base.id, encoder->base.name);
>  
> -	drm_WARN_ON(dev, !drm_modeset_is_locked(&config->connection_mutex));
> +	drm_WARN_ON(display->drm, !drm_modeset_is_locked(&config->connection_mutex));
>  
>  	/*
>  	 * Algorithm gets a little messy:
> @@ -89,7 +88,7 @@ intel_load_detect_get_pipe(struct drm_connector *connector,
>  	}
>  
>  	/* Find an unused one (if possible) */
> -	for_each_intel_crtc(dev, possible_crtc) {
> +	for_each_intel_crtc(display->drm, possible_crtc) {
>  		if (!(encoder->base.possible_crtcs &
>  		      drm_crtc_mask(&possible_crtc->base)))
>  			continue;
> @@ -111,15 +110,15 @@ intel_load_detect_get_pipe(struct drm_connector *connector,
>  	 * If we didn't find an unused CRTC, don't use any.
>  	 */
>  	if (!crtc) {
> -		drm_dbg_kms(&dev_priv->drm,
> +		drm_dbg_kms(display->drm,
>  			    "no pipe available for load-detect\n");
>  		ret = -ENODEV;
>  		goto fail;
>  	}
>  
>  found:
> -	state = drm_atomic_state_alloc(dev);
> -	restore_state = drm_atomic_state_alloc(dev);
> +	state = drm_atomic_state_alloc(display->drm);
> +	restore_state = drm_atomic_state_alloc(display->drm);
>  	if (!state || !restore_state) {
>  		ret = -ENOMEM;
>  		goto fail;
> @@ -164,7 +163,7 @@ intel_load_detect_get_pipe(struct drm_connector *connector,
>  	if (!ret)
>  		ret = drm_atomic_add_affected_planes(restore_state, &crtc->base);
>  	if (ret) {
> -		drm_dbg_kms(&dev_priv->drm,
> +		drm_dbg_kms(display->drm,
>  			    "Failed to create a copy of old state to restore: %i\n",
>  			    ret);
>  		goto fail;
> @@ -172,7 +171,7 @@ intel_load_detect_get_pipe(struct drm_connector *connector,
>  
>  	ret = drm_atomic_commit(state);
>  	if (ret) {
> -		drm_dbg_kms(&dev_priv->drm,
> +		drm_dbg_kms(display->drm,
>  			    "failed to set mode on load-detect pipe\n");
>  		goto fail;
>  	}
> @@ -204,13 +203,13 @@ void intel_load_detect_release_pipe(struct drm_connector *connector,
>  				    struct drm_atomic_state *state,
>  				    struct drm_modeset_acquire_ctx *ctx)
>  {
> +	struct intel_display *display = to_intel_display(connector->dev);
>  	struct intel_encoder *intel_encoder =
>  		intel_attached_encoder(to_intel_connector(connector));
> -	struct drm_i915_private *i915 = to_i915(intel_encoder->base.dev);
>  	struct drm_encoder *encoder = &intel_encoder->base;
>  	int ret;
>  
> -	drm_dbg_kms(&i915->drm, "[CONNECTOR:%d:%s], [ENCODER:%d:%s]\n",
> +	drm_dbg_kms(display->drm, "[CONNECTOR:%d:%s], [ENCODER:%d:%s]\n",
>  		    connector->base.id, connector->name,
>  		    encoder->base.id, encoder->name);
>  
> @@ -219,7 +218,7 @@ void intel_load_detect_release_pipe(struct drm_connector *connector,
>  
>  	ret = drm_atomic_helper_commit_duplicated_state(state, ctx);
>  	if (ret)
> -		drm_dbg_kms(&i915->drm,
> +		drm_dbg_kms(display->drm,
>  			    "Couldn't release load detect pipe: %i\n", ret);
>  	drm_atomic_state_put(state);
>  }
> -- 
> 2.39.2
> 


More information about the Intel-gfx mailing list