August 2024 Archives by author

• Messages sorted by: [ thread ] [ subject ] [ date ]
• More info on this list...

Starting: Thu Aug 1 00:15:33 UTC 2024
Ending: Sat Aug 31 16:02:49 UTC 2024
Messages: 1610

• [PULL] drm-intel-fixes   Dave Airlie
• [PATCH 31/86] drm/panel/ili9341: Run DRM default client setup   Neil Armstrong
• [PATCH 31/86] drm/panel/ili9341: Run DRM default client setup   Neil Armstrong
• [PATCH v2 27/86] drm/meson: Run DRM default client setup   Neil Armstrong
• [PATCH] drm/i915/uc: Includ requested frequency in slow firmware load messages   Belgaumkar, Vinay
• [PATCH] drm/i915/display: correct dual pps handling for MTL_PCH+   Dnyaneshwar Bhadane
• [PATCH] drm/i915/bios: Update new entries in VBT BDB block definations   Dnyaneshwar Bhadane
• [PATCH] drm/i915/bios: Update new entries in VBT BDB block definations   Bhadane, Dnyaneshwar
• [PATCH] drm/i915/pps: Disable DPLS_GATING around pps sequence   Bhadane, Dnyaneshwar
• [v2] drm/i915/bios: Update new entries in VBT BDB block definitions   Dnyaneshwar Bhadane
• [PATCH] drm/i915/bios: Update new entries in VBT BDB block definations   Bhadane, Dnyaneshwar
• [v3] drm/i915/bios: Update new entries in VBT BDB block definitions   Dnyaneshwar Bhadane
• [PATCH] drm/i915/gt: Disable Redundant HZ Plane expansions for MTL/ARL and DG2   Dnyaneshwar Bhadane
• [v2] drm/i915/gt: Whitelist COMMON_SLICE_CHICKEN1 for UMD access.   Dnyaneshwar Bhadane
• [PATCH] drm/i915/dmc: Hardcode path to MTL DMC v2.23   Dnyaneshwar Bhadane
• [PATCH] drm/i915/mtl: Update PLL c20 phy value for DP uhbr20   Dnyaneshwar Bhadane
• [PATCH v2] drm/i915: Explicitly cast divisor and use div_u64()   Thorsten Blum
• [PATCH v3] drm/i915: Explicitly cast divisor and use div_u64()   Thorsten Blum
• [core-for-CI PATCH] usb: typec: ucsi: Fix a potential deadlock in ucsi_send_command_common()   Chaitanya Kumar Borah
• [PATCH] drm/i915: Preserve value of fec_enable calculated before DSC compute config   Chaitanya Kumar Borah
• [PATCH] drm/i915: Preserve value of fec_enable calculated before DSC compute config   Borah, Chaitanya Kumar
• [PATCH] drm/i915: Do not explicilty enable FEC in DP_TP_CTL for UHBR rates   Chaitanya Kumar Borah
• [PATCH] drm/i915: Preserve value of fec_enable calculated before DSC compute config   Borah, Chaitanya Kumar
• Regression on linux-next (next-20240829)   Borah, Chaitanya Kumar
• PR for new i915 and Xe binaries   Josh Boyer
• [linux-next:master] [fs] cdc4ad36a8: kernel_BUG_at_include/linux/page-flags.h   Christian Brauner
• [PATCH 0/2] Allow partial memory mapping for cpu memory   Matthew Brost
• [PATCH 0/2] Allow partial memory mapping for cpu memory   Matthew Brost
• [PATCH 0/2] Allow partial memory mapping for cpu memory   Matthew Brost
• [PATCH v2 0/2] Allow partial memory mapping for cpu memory   Matthew Brost
• [PATCH v2 0/2] Allow partial memory mapping for cpu memory   Matthew Brost
• [PATCH v6 2/2] drm/xe: Align all VRAM scanout buffers to 64k physical pages when needed.   Matthew Brost
• [PATCH v6 2/2] drm/xe: Align all VRAM scanout buffers to 64k physical pages when needed.   Matthew Brost
• [PATCH v6 2/2] drm/xe: Align all VRAM scanout buffers to 64k physical pages when needed.   Matthew Brost
• [PATCH] video/aperture: match the pci device when calling sysfb_disable()   Javier Martinez Canillas
• [PATCH 57/86] drm/ofdrm: Use DRM default client setup   Javier Martinez Canillas
• [PATCH 58/86] drm/simpledrm: Run DRM default client setup   Javier Martinez Canillas
• [PATCH 59/86] drm/solomon: Run DRM default client setup   Javier Martinez Canillas
• [PATCH V2] video/aperture: match the pci device when calling sysfb_disable()   Javier Martinez Canillas
• [PATCH V3] video/aperture: optionally match the device in sysfb_disable()   Javier Martinez Canillas
• [PATCH v10] drm/i915: WA context support for L3flush   Dan Carpenter
• [PATCH 1/2] drm/i915/gem: Adjust vma offset for framebuffer mmap offset   Cavitt, Jonathan
• [PATCH 2/2] drm/i915/gem: Fix Virtual Memory mapping boundaries calculation   Cavitt, Jonathan
• [PATCH v2] drm/i915: Explicitly cast divisor and use div_u64()   Cavitt, Jonathan
• [PATCH 1/2] drm/i915: Allow evicting to use the requested placement   Cavitt, Jonathan
• [PATCH 2/2] drm/i915: Attempt to get pages without eviction first   Cavitt, Jonathan
• [PATCH 1/3] drm/i915: remove a few __i915_printk() uses   Cavitt, Jonathan
• [PATCH 2/3] drm/i915: remove i915_report_error()   Cavitt, Jonathan
• [PATCH 3/3] drm/i915: remove __i915_printk()   Cavitt, Jonathan
• [PATCH] drm/i915/gem: Improve pfn calculation readability in vm_fault_gtt()   Cavitt, Jonathan
• [PATCH] drm/i915/gt: Mark the GT as dead when mmio is unreliable   Cavitt, Jonathan
• [PATCH] drm/i915/guc: Change GEM_WARN_ON to guc_err to prevent taints in CI   Cavitt, Jonathan
• [PATCH] drm/i915/gt: remove stray declaration of intel_gt_release_all()   Cavitt, Jonathan
• [PATCH] drm/i915: Do not attempt to load the GSC multiple times   Cavitt, Jonathan
• [PATCH] drm/i915: remove unused leftover basedie step code   Cavitt, Jonathan
• [PATCH 1/2] drm/xe: Add missing runtime reference to wedged upon gt_reset   Cavitt, Jonathan
• [PATCH 2/2] drm/xe/display: Avoid encoder_suspend at runtime suspend   Cavitt, Jonathan
• [PATCH 22/86] drm/ingenic: Run DRM default client setup   Paul Cercueil
• [PATCH] drm/i915/gem: Remove duplicate 'unlikely()' usage   Kunwu Chan
• [PATCH v1 0/2] drm/i915/fence: A couple of build fixes   Nathan Chancellor
• [PATCH v1 0/2] drm/i915/fence: A couple of build fixes   Nathan Chancellor
• [PATCH] drm/i915/gt: Disable Redundant HZ Plane expansions for MTL/ARL and DG2   Chery, Nanley G
• [PATCH v1] drm/ci: increase timeout for all jobs   Rob Clark
• [core-for-CI PATCH] scsi: sd: Move sd_read_cpr() out of the q->limits_lock region   Luca Coelho
• [PATCH] drm/i915/gt: remove stray declaration of intel_gt_release_all()   Luca Coelho
• [core-for-CI PATCH] usb: typec: ucsi: Fix a potential deadlock in ucsi_send_command_common()   Coelho, Luciano
• Re: ✗ Fi.CI.IGT: failure for drm/i915/gt: remove stray declaration of intel_gt_release_all()   Coelho, Luciano
• [PATCH v2 1/2] string: add mem_is_zero() helper to check if memory area is all zeros   Kees Cook
• [PATCH v2 2/2] drm: use mem_is_zero() instead of !memchr_inv(s, 0, n)   Kees Cook
• [PATCH 35/86] drm/renesas/rz-du: Run DRM default client setup   Biju Das
• [PATCH 2/2] drm/i915/gem: Calculate object page offset for partial memory mapping   Nirmoy Das
• [PATCH 1/2] drm/i915/gem: Do not look for the exact address in node   Nirmoy Das
• [PATCH] drm/i915/guc: Fix missing enable of Wa_14019159160 on ARL   Nirmoy Das
• [PATCH 03/14] drm/dp_mst: Simplify the condition when to enumerate path resources   Imre Deak
• [CI 0/7] drm/i915: Dump DSC HW state   Imre Deak
• [CI 1/7] drm/i915: Replace to_bpp_x16() with fxp_q4_from_int()   Imre Deak
• [CI 2/7] drm/i915: Replace to_bpp_int() with fxp_q4_to_int()   Imre Deak
• [CI 3/7] drm/i915: Replace to_bpp_int_roundup() with fxp_q4_to_int_roundup()   Imre Deak
• [CI 4/7] drm/i915: Replace to_bpp_frac() with fxp_q4_to_frac()   Imre Deak
• [CI 5/7] drm/i915: Replace BPP_X16_FMT()/ARGS() with FXP_Q4_FMT()/ARGS()   Imre Deak
• [CI 6/7] drm/i915: Dump DSC state to dmesg and debugfs/i915_display_info   Imre Deak
• [CI 7/7] drm/i915: Remove DSC register dump   Imre Deak
• ✗ Fi.CI.IGT: failure for drm/i915: Dump DSC HW state   Imre Deak
• [PATCH 1/4] drm/i915/acpi: convert to struct intel_display   Imre Deak
• [PATCH 2/4] drm/i915/opregion: unify intel_encoder/intel_connector naming   Imre Deak
• [PATCH 3/4] drm/i915/opregion: convert to struct intel_display   Imre Deak
• [PATCH 4/4] drm/i915/bios: convert to struct intel_display   Imre Deak
• [PATCH] drm/xe/pm: Change HPD to polling on runtime suspend   Imre Deak
• [PATCH] drm/xe/pm: Change HPD to polling on runtime suspend   Imre Deak
• [PATCH] drm/i915: make __intel_display_power_is_enabled() static   Imre Deak
• A huge warning in dmesg pointing to drivers/gpu/drm/i915/display/intel_tc.c   Imre Deak
• [PATCH] drm/i915: make intel_display_power_domain_str() static   Imre Deak
• [PATCH] drm/i915/dp_mst: Fix MST state after a sink reset   Imre Deak
• [PATCH] drm/i915/dp_mst: Fix MST state after a sink reset   Imre Deak
• [PATCH] drm/i915/dp_mst: Fix MST state after a sink reset   Imre Deak
• [PATCH] drm/i915/dp_mst: Fix MST state after a sink reset   Imre Deak
• [PATCH v2] drm/i915/dp_mst: Fix MST state after a sink reset   Imre Deak
• ✗ Fi.CI.IGT: failure for drm/i915/dp_mst: Fix MST state after a sink reset (rev3)   Imre Deak
• [PATCH] drm/i915/display: Fix BMG CCS modifiers   Imre Deak
• [PATCH] fbdev: Introduce devm_register_framebuffer()   Helge Deller
• [PATCH] fbdev: Introduce devm_register_framebuffer()   Helge Deller
• [PATCH 1/9] drm/amdgpu: Use backlight power constants   Alex Deucher
• [PATCH 1/9] drm/amdgpu: Use backlight power constants   Alex Deucher
• [PATCH] video/aperture: match the pci device when calling sysfb_disable()   Alex Deucher
• [PATCH v6 0/4] drm: Use full allocated minor range for DRM   Alex Deucher
• [PATCH v6 0/4] drm: Use full allocated minor range for DRM   Alex Deucher
• [PATCH] video/aperture: match the pci device when calling sysfb_disable()   Alex Deucher
• [PATCH V2] video/aperture: match the pci device when calling sysfb_disable()   Alex Deucher
• [PATCH V2] video/aperture: match the pci device when calling sysfb_disable()   Alex Deucher
• [PATCH V3] video/aperture: optionally match the device in sysfb_disable()   Alex Deucher
• [PATCH v2 65/86] drm/amdgpu: Run DRM default client setup   Alex Deucher
• [PATCH v2 78/86] drm/radeon: Run DRM default client setup   Alex Deucher
• [RESEND 3/3] drm/amd/display: switch to guid_gen() to generate valid GUIDs   Alex Deucher
• [PATCH 1/9] drm/amdgpu: Use backlight power constants   Deucher, Alexander
• [PATCH 07/86] drm/arm/komeda: Run DRM default client setup   Liviu Dudau
• [PATCH 08/86] drm/arm/hdlcd: Run DRM default client setup   Liviu Dudau
• [PATCH 09/86] drm/arm/malidp: Run DRM default client setup   Liviu Dudau
• [PATCH v2 51/86] drm/ast: Run DRM default client setup   Jocelyn Falempe
• [PATCH v2 56/86] drm/mgag200: Run DRM default client setup   Jocelyn Falempe
• XDC 2024: Call for Proposals deadline extended to August 19   Mark Filion
• [PATCH v1] drm/ci: increase timeout for all jobs   Helen Mae Koike Fornazier
• [PATCH v1] drm/ci: increase timeout for all jobs   Helen Mae Koike Fornazier
• [PATCH 40/86] drm/stm: Run DRM default client setup   Raphael Gallais-Pou
• [PATCH v2 40/86] drm/stm: Run DRM default client setup   Raphael Gallais-Pou
• [PATCH 0/2] Consider joiner calculation for panel fitting   Nemesa Garg
• [PATCH 1/2] drm/i915/display: Refactor pch_panel_fitting to use local variables for crtc dimensions   Nemesa Garg
• [PATCH 2/2] drm/i915/display: Call panel_fitting from pipe_config   Nemesa Garg
• [PATCH 2/2] drm/i915/display: Call panel_fitting from pipe_config   Nemesa Garg
• [PATCH] drm/i915/display: Workaround for odd panning for planar yuv   Garg, Nemesa
• [PATCH 1/2] drm/xe: Add missing runtime reference to wedged upon gt_reset   Ghimiray, Himal Prasad
• [PATCH] drm/i915/dsi: Make Lenovo Yoga Tab 3 X90F DMI match less strict   Hans de Goede
• [PATCH] drm/i915/dsi: Make Lenovo Yoga Tab 3 X90F DMI match less strict   Hans de Goede
• [PATCH] drm/i915/dsi: Make Lenovo Yoga Tab 3 X90F DMI match less strict   Hans de Goede
• [PATCH v2] drm/i915/bmg: Read display register timeout   Mitul Golani
• [PATCH v3] drm/i915/bmg: Read display register timeout   Mitul Golani
• [RFC] Add AS_SDP to fastset   Mitul Golani
• [PATCH] drm/i915/bmg: Read display register timeout   Golani, Mitulkumar Ajitkumar
• [PATCH v10] drm/i915: WA context support for L3flush   Nitin Gote
• RE: ✗ Fi.CI.BAT: failure for drm/i915: Add Wa_14019789679 (rev5)   Gote, Nitin R
• [PATCH v10] drm/i915: WA context support for L3flush   Gote, Nitin R
• [PATCH] drm/i915: Implement Dbuf overlap detection feature starting from LNL   Govindapillai, Vinod
• [PATCH v2] drm/i915: Implement Dbuf overlap detection feature starting from LNL   Vinod Govindapillai
• [PATCH v2] drm/i915: Implement Dbuf overlap detection feature starting from LNL   Vinod Govindapillai
• [PATCHv2] drm/i915/display: BMG supports UHBR13.5   Govindapillai, Vinod
• [PATCH 0/2] drm/i915: Fix ttm small BAR placement handling   David Gow
• [PATCH 1/2] drm/i915: Allow evicting to use the requested placement   David Gow
• [PATCH 2/2] drm/i915: Attempt to get pages without eviction first   David Gow
• [PATCH 0/3] Introducing Xe2 ccs modifiers for integrated and discrete graphics   Juha-Pekka Heikkila
• [PATCH 1/3] drm/i915/display: Don't enable decompression on Xe2 with Tile4   Juha-Pekka Heikkila
• [PATCH 2/3] drm/fourcc: define Intel Xe2 related tile4 ccs modifiers   Juha-Pekka Heikkila
• [PATCH 3/3] drm/i915/display: allow creation of Xe2 ccs framebuffers   Juha-Pekka Heikkila
• [PATCH] drm/i915/display: Fix BMG CCS modifiers   Juha-Pekka Heikkila
• [PATCH] drm/i915/display: Fix BMG CCS modifiers   Juha-Pekka Heikkila
• [PATCH v2] drm/i915/display: Fix BMG CCS modifiers   Juha-Pekka Heikkila
• [RFC PATCH] dma-buf/dma-fence: Use a successful read_trylock() annotation for dma_fence_begin_signalling()   Thomas Hellström
• [PATCH v5 1/2] drm/xe: Align all VRAM scanout buffers to 64k physical pages when needed.   Thomas Hellström
• Re: ✗ Fi.CI.IGT: failure for drm/i915/psr: Prevent Panel Replay if CRC calculation is enabled   Hogander, Jouni
• [PATCH] drm/i915/psr: Prevent Panel Replay if CRC calculation is enabled   Hogander, Jouni
• [PATCH 2/2] drm/i915/psr: Implment WA to help reach PC10   Hogander, Jouni
• [PATCH 2/2] drm/i915/psr: Implment WA to help reach PC10   Hogander, Jouni
• [PATCH 2/2] drm/i915/psr: Implment WA to help reach PC10   Hogander, Jouni
• [PATCH 2/2] drm/i915/psr: Implment WA to help reach PC10   Hogander, Jouni
• [PATCH] drm/i915/display: use old bpp as a base when modeset is not allowed   Hogander, Jouni
• [PATCH v2 1/2] drm/i915/display: Add mechanism to use sink model when applying quirk   Hogander, Jouni
• [PATCH 2/2] drm/i915/gem: Fix Virtual Memory mapping boundaries calculation   Jann Horn
• [PATCH v2 0/2] Fix mmap memory boundary calculation   Jann Horn
• [PATCH v2 0/2] Fix mmap memory boundary calculation   Jann Horn
• [PATCH v2 0/2] Fix mmap memory boundary calculation   Jann Horn
• [PATCH] drm/i915/psr: Prevent Panel Replay if CRC calculation is enabled   Jouni Högander
• [PATCH 0/2] Increase fastwake sync pulse count as a quirk   Jouni Högander
• [PATCH 1/2] drm/i915/display: Add mechanism to use sink model when applying quirk   Jouni Högander
• [PATCH 2/2] drm/i915/display: Increase Fast Wake Sync length as a quirk   Jouni Högander
• [PATCH v2 0/2] Increase fastwake sync pulse count as a quirk   Jouni Högander
• [PATCH v2 1/2] drm/i915/display: Add mechanism to use sink model when applying quirk   Jouni Högander
• [PATCH v2 2/2] drm/i915/display: Increase Fast Wake Sync length as a quirk   Jouni Högander
• [PATCH] drm/i915/display: use old bpp as a base when modeset is not allowed   Jouni Högander
• RE: ✗ Fi.CI.BAT: failure for drm/i915: Add Wa_14019789679 (rev5)   Illipilli, TejasreeX
• RE: ✗ Fi.CI.IGT: failure for drm/i915/gt: remove stray declaration of intel_gt_release_all()   Illipilli, TejasreeX
• [PATCH] drm/i915: ARL requires a newer GSC firmware   John.C.Harrison at Intel.com
• [PATCH] drm/i915/dg2: Enable Wa_14019159160 for DG2   John.C.Harrison at Intel.com
• [PATCH] drm/i915/guc: Fix missing enable of Wa_14019159160 on ARL   John.C.Harrison at Intel.com
• [PATCH] drm/i915/uc: Includ requested frequency in slow firmware load messages   John.C.Harrison at Intel.com
• [PATCH v3] drm/i915/hwmon: expose fan speed   Raag Jadav
• [PATCH v3] drm/i915/hwmon: expose fan speed   Raag Jadav
• [PATCH v4] drm/i915/hwmon: expose fan speed   Raag Jadav
• [PATCH v4] drm/i915/hwmon: expose fan speed   Raag Jadav
• [PATCH v4] drm/i915/hwmon: expose fan speed   Raag Jadav
• [PATCH v5] drm/i915/hwmon: expose fan speed   Raag Jadav
• [PATCH v5] drm/i915/hwmon: expose fan speed   Raag Jadav
• [PATCH v5] drm/i915/hwmon: expose fan speed   Raag Jadav
• [PATCH v5] drm/i915/hwmon: expose fan speed   Raag Jadav
• [PATCH v4] drm/i915/hwmon: expose fan speed   Raag Jadav
• [PATCH v4] drm/i915/hwmon: expose fan speed   Raag Jadav
• [PATCH v4] drm/i915/hwmon: expose fan speed   Raag Jadav
• [PATCH v6] drm/i915/hwmon: expose fan speed   Raag Jadav
• [PATCH v4] drm/i915/hwmon: expose fan speed   Raag Jadav
• [PATCH v6] drm/i915/hwmon: expose fan speed   Raag Jadav
• [PATCH v4] drm/i915/hwmon: expose fan speed   Raag Jadav
• [PATCH v6] drm/i915/hwmon: expose fan speed   Raag Jadav
• [PATCH v7] drm/i915/hwmon: expose fan speed   Raag Jadav
• [PATCH v1] drm/i915/hwmon: expose package temperature   Raag Jadav
• [PATCH v1] drm/i915/hwmon: expose package temperature   Raag Jadav
• [PATCH v1] drivers:gt:Switch to use kmemdup_array()   Yu Jiaoliang
• [PATCH v2] drm/i915/gt: Use kmemdup_array instead of kmemdup for multiple allocation   Yu Jiaoliang
• [PATCH v3] drm/i915/gt: Use kmemdup_array instead of kmemdup for multiple allocation   Yu Jiaoliang
• [82/86] drm/i915: Move custom hotplug code into separate callback   Sui Jingfeng
• [68/86] drm/loongson: Run DRM default client setup   Sui Jingfeng
• [82/86] drm/i915: Move custom hotplug code into separate callback   Sui Jingfeng
• [PATCH] drm/i915/psr: Prevent Panel Replay if CRC calculation is enabled   Kahola, Mika
• [PATCHv2] drm/i915/display: BMG supports UHBR13.5   Kahola, Mika
• [PATCH 09/12] drm/i915/display/vdsc: Add ultrajoiner support with DSC   Kandpal, Suraj
• [PATCH 11/12] drm/i915: Add new abstraction layer to handle pipe order for different joiners   Kandpal, Suraj
• [PATCH 12/12] drm/i915/intel_dp: Add support for forcing ultrajoiner   Kandpal, Suraj
• [PATCH v2] drm/i915/bmg: Read display register timeout   Kandpal, Suraj
• [PATCH] drm/i915/hdcp: Use correct cp_irq_count   Suraj Kandpal
• [PATCH] drm/i915/hdcp: Use correct cp_irq_count   Kandpal, Suraj
• [PATCH] drm/i915/hdcp: Use correct cp_irq_count   Suraj Kandpal
• [PATCH] drm/i915/pps: Disable DPLS_GATING around pps sequence   Suraj Kandpal
• [v2] drm/i915/bios: Update new entries in VBT BDB block definitions   Kandpal, Suraj
• [PATCH 2/2] drm/i915/psr: Implment WA to help reach PC10   Kandpal, Suraj
• [PATCH] drm/i915/dp_mst: Fix MST state after a sink reset   Kandpal, Suraj
• [PATCH 2/2] drm/i915/psr: Implment WA to help reach PC10   Kandpal, Suraj
• [PATCH 2/2] drm/i915/psr: Implment WA to help reach PC10   Kandpal, Suraj
• [PATCH 2/2] drm/i915/psr: Implment WA to help reach PC10   Kandpal, Suraj
• [PATCH 2/2] drm/i915/psr: Implment WA to help reach PC10   Kandpal, Suraj
• [PATCH] drm/i915: Fix NULL ptr deref in intel_async_flip_check_uapi()   Ma Ke
• [PATCH v5 1/2] drm/xe: Align all VRAM scanout buffers to 64k physical pages when needed.   Zbigniew Kempczyński
• [PATCH v5 2/2] drm/i915/display: Add function for checking 64k physical alignment workaround   Zbigniew Kempczyński
• [PATCH 02/10] tools/include: Sync uapi/drm/i915_drm.h with the kernel sources   Namhyung Kim
• [PATCH v9 0/6] drm/ci: Add support for GPU and display testing   Helen Koike
• [PULL] drm-intel-fixes   Krzysztof Kozlowski
• [PULL] drm-intel-fixes   Krzysztof Kozlowski
• [PULL] drm-intel-fixes   Krzysztof Kozlowski
• [PULL] drm-intel-fixes   Krzysztof Kozlowski
• [PATCH v2 0/2] Fix mmap memory boundary calculation   Greg Kroah-Hartman
• [PATCH 69/86] drm/nouveau: Run DRM default client setup   Danilo Krummrich
• [PATCH 1/5] drm/i915/display: Add support for histogram   Kulkarni, Vandita
• [PATCH 1/5] drm/i915/display: Add support for histogram   Kulkarni, Vandita
• [PATCH 1/5] drm/i915/display: Add support for histogram   Kulkarni, Vandita
• [PATCH 1/2] drm/ttm: fix kernel-doc typo for @trylock_only   Christian König
• [PATCH v7 0/3] drm: Use full allocated minor range for DRM   Christian König
• [PULL] drm-intel-fixes   Joonas Lahtinen
• [PATCH v2 0/2] Fix mmap memory boundary calculation   Joonas Lahtinen
• [PATCH] drm/i915: 2 GiB of relocations ought to be enough for anybody*   Joonas Lahtinen
• [PULL] drm-intel-fixes   Joonas Lahtinen
• [PATCH v2 0/2] Fix mmap memory boundary calculation   Joonas Lahtinen
• [PULL] drm-intel-fixes   Joonas Lahtinen
• [PULL] drm-intel-gt-next   Joonas Lahtinen
• [PULL] drm-intel-fixes   Joonas Lahtinen
• [PATCH 2/2] drm/xe/display: drop unused rawclk_freq and RUNTIME_INFO()   Maarten Lankhorst
• [PATCH 2/3] drm/fourcc: define Intel Xe2 related tile4 ccs modifiers   Maarten Lankhorst
• [PATCH v5 0/2] drm/xe: Align all VRAM scanout buffers to 64k physical pages when needed.   Maarten Lankhorst
• [PATCH v5 1/2] drm/xe: Align all VRAM scanout buffers to 64k physical pages when needed.   Maarten Lankhorst
• [PATCH v5 2/2] drm/i915/display: Add function for checking 64k physical alignment workaround   Maarten Lankhorst
• [PATCH v5 1/2] drm/xe: Align all VRAM scanout buffers to 64k physical pages when needed.   Maarten Lankhorst
• [PATCH v6 0/2] drm/xe: Align all VRAM scanout buffers to 64k physical pages when needed.   Maarten Lankhorst
• [PATCH v6 1/2] drm/i915/display: Plane capability for 64k phys alignment   Maarten Lankhorst
• [PATCH v6 2/2] drm/xe: Align all VRAM scanout buffers to 64k physical pages when needed.   Maarten Lankhorst
• [PATCH v6 2/2] drm/xe: Align all VRAM scanout buffers to 64k physical pages when needed.   Maarten Lankhorst
• [PATCH v6 2/2] drm/xe: Align all VRAM scanout buffers to 64k physical pages when needed.   Maarten Lankhorst
• [PATCH] drm/i915/display: use old bpp as a base when modeset is not allowed   Maarten Lankhorst
• [PATCH] drm/i915/display: Fix BMG CCS modifiers   Maarten Lankhorst
• [PATCH] drm/i915/display: Fix BMG CCS modifiers   Maarten Lankhorst
• [PATCH v2 16/86] drm/ili9225: Run DRM default client setup   David Lechner
• [PATCH v2 44/86] drm/st7586: Run DRM default client setup   David Lechner
• [PATCH v2 45/86] drm/st7735r: Run DRM default client setup   David Lechner
• [PATCH] drm/i915/display: use old bpp as a base when modeset is not allowed   Lee, Shawn C
• [PATCH -next] drm/i915: Remove extra unlikely helper   Hongbo Li
• [PATCH v1] drm/i915/dp: Remove double assignment in intel_dp_compute_as_sdp()   Yuesong Li
• [PATCH] drm/i915: Implement Dbuf overlap detection feature starting from LNL   Stanislav Lisovskiy
• [PATCH] drm/i915:Remove unused parameter in marco.   He Lugang
• [PATCH v2 65/86] drm/amdgpu: Run DRM default client setup   Hamza Mahfooz
• [RESEND 3/3] drm/amd/display: switch to guid_gen() to generate valid GUIDs   Hamza Mahfooz
• [RESEND 3/3] drm/amd/display: switch to guid_gen() to generate valid GUIDs   Hamza Mahfooz
• [PATCH 11/14] drm/i915/dsb: Allow intel_dsb_chain() to use DSB_WAIT_FOR_VBLANK   Manna, Animesh
• [PATCH 10/14] drm/i915/dsb: Introduce intel_dsb_chain()   Manna, Animesh
• [PATCH 10/14] drm/i915/dsb: Introduce intel_dsb_chain()   Manna, Animesh
• [PATCH 11/14] drm/i915/dsb: Allow intel_dsb_chain() to use DSB_WAIT_FOR_VBLANK   Manna, Animesh
• [PATCH 14/14] drm/i915/dsb: Use chained DSBs for LUT programming   Manna, Animesh
• [PATCH 09/14] drm/i915/dsb: Introduce intel_dsb_wait_scanline_{in, out}()   Manna, Animesh
• [PATCH v2 03/14] drm/i915/dsb: Hook up DSB error interrupts   Manna, Animesh
• [PATCH 03/10] drm/xe/tests: fix drvdata usage   Lucas De Marchi
• [PATCH v2 00/10] drm/xe & drm/i915: drvdata usage changes   Lucas De Marchi
• [PATCH v2 00/10] drm/xe & drm/i915: drvdata usage changes   Lucas De Marchi
• [PATCH v2 00/10] drm/xe & drm/i915: drvdata usage changes   Lucas De Marchi
• linux-next: manual merge of the drm-xe tree with the drm-intel tree   Lucas De Marchi
• [PATCH 2/3] drm/fourcc: define Intel Xe2 related tile4 ccs modifiers   Lucas De Marchi
• [PATCH v2] drm/i915/gt: Use kmemdup_array instead of kmemdup for multiple allocation   Lucas De Marchi
• [PATCH 01/10] drm/xe/display: fix compat IS_DISPLAY_STEP() range end   Lucas De Marchi
• [PATCH 00/10] drm/i915/display: identify display steppings in display code   Lucas De Marchi
• [PULL] drm-xe-next   Lucas De Marchi
• [PULL] drm-xe-next   Lucas De Marchi
• [PATCH] RFC: drm/drm_plane: Expose the plane capability and interoperability   Murthy, Arun R
• [PATCH] drm/xe/pm: Change HPD to polling on runtime suspend   Arun R Murthy
• [PATCH] drm/xe/pm: Change HPD to polling on runtime suspend   Murthy, Arun R
• [PATCH 1/5] drm/i915/display: Add support for histogram   Murthy, Arun R
• [v2PATCH] drm/xe/display: Change HPD to polling on runtime suspend   Arun R Murthy
• [PATCHv2] drm/xe/display: Change HPD to polling on runtime suspend   Arun R Murthy
• [PATCHv3] drm/xe/display: Change HPD to polling on runtime suspend   Arun R Murthy
• [PATCHv3] drm/xe/display: Change HPD to polling on runtime suspend   Arun R Murthy
• [PATCHv2 0/5] Display Global histogram   Arun R Murthy
• [PATCHv2 1/5] drm/i915/display: Add support for histogram   Arun R Murthy
• [PATCHv2 2/5] drm/i915/display: histogram interrupt handling   Arun R Murthy
• [PATCHv2 3/5] Add crtc properties for global histogram   Arun R Murthy
• [PATCHv2 4/5] drm/i915/histogram: histogram delay counter doesnt reset   Arun R Murthy
• [PATCHv2 5/5] drm/i915/display/histogram: Histogram changes for Display LNL+   Arun R Murthy
• [PATCH 1/5] drm/i915/display: Add support for histogram   Murthy, Arun R
• [PATCH 1/5] drm/i915/display: Add support for histogram   Murthy, Arun R
• [PATCH] drm/i915/display: BMG supports UHBR13.5   Arun R Murthy
• [PATCH] drm/i915/display: BMG supports UHBR13.5   Murthy, Arun R
• [PATCHv2] drm/i915/display: BMG supports UHBR13.5   Arun R Murthy
• [PATCH] drm/i915/display: BMG supports UHBR13.5   Murthy, Arun R
• [1/5] drm: Introduce sharpness mode property   Murthy, Arun R
• [v4 2/5] drm/i915/display: Compute the scaler filter coefficients   Murthy, Arun R
• [3/5] drm/i915/display: Enable the second scaler for sharpness   Murthy, Arun R
• [4/5] drm/i915/display: Add registers and compute the strength   Murthy, Arun R
• RE: ✓ Fi.CI.BAT: success for drm/i915: nomodeset and i915.modeset cleanups (rev2)   Musial, Ewelina
• [PATCH] drm/i915/guc: Change GEM_WARN_ON to guc_err to prevent taints in CI   Jesus Narvaez
• [PATCH] drm/i915/guc: Change GEM_WARN_ON to guc_err to prevent taints in CI   Narvaez, Jesus
• [PATCH 0/5] Add HDMI PLL Algorithm for SNPS/C10PHY   Ankit Nautiyal
• [PATCH 1/5] drm/i915/display: Add support for SNPS PHY HDMI PLL algorithm for DG2   Ankit Nautiyal
• [PATCH 2/5] drm/i915/snps_phy: Use HDMI PLL algorithm for DG2   Ankit Nautiyal
• [PATCH 3/5] drm/i915/cx0_phy_regs: Add C10 registers bits   Ankit Nautiyal
• [PATCH 4/5] drm/i915/pll_algorithm: Compute C10 HDMI PLLs with algorithm   Ankit Nautiyal
• [PATCH 5/5] drm/i915/cx0_phy: Use HDMI PLL algorithm for C10 PHY   Ankit Nautiyal
• [PATCH 0/5] Add HDMI PLL Algorithm for SNPS/C10PHY   Ankit Nautiyal
• [PATCH 1/5] drm/i915/display: Add support for SNPS PHY HDMI PLL algorithm for DG2   Ankit Nautiyal
• [PATCH 2/5] drm/i915/snps_phy: Use HDMI PLL algorithm for DG2   Ankit Nautiyal
• [PATCH 3/5] drm/i915/cx0_phy_regs: Add C10 registers bits   Ankit Nautiyal
• [PATCH 4/5] drm/i915/intel_snps_hdmi_pll: Compute C10 HDMI PLLs with algorithm   Ankit Nautiyal
• [PATCH 5/5] drm/i915/cx0_phy: Use HDMI PLL algorithm for C10 PHY   Ankit Nautiyal
• [PATCH 00/12] Consolidation of DSS Control in Separate Files   Ankit Nautiyal
• [PATCH 01/12] drm/i915/display: Move all DSS control registers to a new file   Ankit Nautiyal
• [PATCH 02/12] drm/i915/ddi: Move all mso related helpers to a new file   Ankit Nautiyal
• [PATCH 03/12] drm/i915/dss: Move to struct intel_display   Ankit Nautiyal
• [PATCH 04/12] drm/i915/icl_dsi: Move helpers to configure dsi dual link to intel_dss   Ankit Nautiyal
• [PATCH 05/12] drm/i915/vdsc: Rename helper to check if the pipe supports dsc   Ankit Nautiyal
• [PATCH 06/12] drm/i915/vdsc: Move all dss stuff in dss files   Ankit Nautiyal
• [PATCH 07/12] drm/i915/display: Move dss stuff in intel_dss files   Ankit Nautiyal
• [PATCH 08/12] drm/i915/display: Move helper to get joined pipe mask to intel_dss   Ankit Nautiyal
• [PATCH 09/12] drm/i915/display: Move helpers for primary joiner to intel_dss   Ankit Nautiyal
• [PATCH 10/12] drm/i915/display: Move helper to check for secondary joiner pipe   Ankit Nautiyal
• [PATCH 11/12] drm/i915/display: Move helper to get all secondary pipes   Ankit Nautiyal
• [PATCH 12/12] drm/i915/display: Move intel_joiner_num_pipes to intel dss   Ankit Nautiyal
• [PATCH 00/19] Consolidation of DSS Control in Separate Files   Ankit Nautiyal
• [PATCH 01/19] drm/i915/display: Move all DSS control registers to a new file   Ankit Nautiyal
• [PATCH 02/19] drm/i915/dss_regs: Use REG_* macros for the DSS ctl bits   Ankit Nautiyal
• [PATCH 03/19] drm/i915/ddi: Move all mso related helpers to a new file   Ankit Nautiyal
• [PATCH 04/19] drm/i915/dss: Move to struct intel_display   Ankit Nautiyal
• [PATCH 05/19] drm/i915/icl_dsi: Avoid using intel_dsi in configure_dual_link_mode   Ankit Nautiyal
• [PATCH 06/19] drm/i915/icl_dsi: Use intel_display in configure_dual_link_mode   Ankit Nautiyal
• [PATCH 07/19] drm/i915/icl_dsi: Move helpers to configure dsi dual link to intel_dss   Ankit Nautiyal
• [PATCH 08/19] drm/i915/vdsc: Rename helper to check if the pipe supports dsc   Ankit Nautiyal
• [PATCH 09/19] drm/i915/vdsc: Move all dss stuff in dss files   Ankit Nautiyal
• [PATCH 10/19] drm/i915/dss: Use struct intel_display in dss dsc helpers   Ankit Nautiyal
• [PATCH 11/19] drm/i915/display: Move dss stuff in intel_dss files   Ankit Nautiyal
• [PATCH 12/19] drm/i915/display: Rename static functions that use joiner   Ankit Nautiyal
• [PATCH 13/19] drm/i915/display: Separate out joiner stuff in a new file   Ankit Nautiyal
• [PATCH 14/19] drm/i915/display: Move intel_crtc_joined_pipe_mask to intel_joiner   Ankit Nautiyal
• [PATCH 15/19] drm/i915/display: Move helpers for primary joiner to intel_joiner   Ankit Nautiyal
• [PATCH 16/19] drm/i915/display: Move intel_crtc_is_joiner_secondary to intel_joiner   Ankit Nautiyal
• [PATCH 17/19] drm/i915/display: Move intel_crtc_joiner_secondary_pipes to intel_joiner   Ankit Nautiyal
• [PATCH 18/19] drm/i915/joiner: Use struct intel_display in intel_joiner_enabled_pipes   Ankit Nautiyal
• [PATCH 19/19] drm/i915/joiner: Use struct intel_display in intel_joiner_supported_pipes   Ankit Nautiyal
• [PATCH 00/19] Consolidation of DSS Control in Separate Files   Ankit Nautiyal
• [PATCH 01/19] drm/i915/display: Move all DSS control registers to a new file   Ankit Nautiyal
• [PATCH 02/19] drm/i915/dss_regs: Use REG_* macros for the DSS ctl bits   Ankit Nautiyal
• [PATCH 03/19] drm/i915/ddi: Move all mso related helpers to a new file   Ankit Nautiyal
• [PATCH 04/19] drm/i915/dss: Move to struct intel_display   Ankit Nautiyal
• [PATCH 05/19] drm/i915/icl_dsi: Avoid using intel_dsi in configure_dual_link_mode   Ankit Nautiyal
• [PATCH 06/19] drm/i915/icl_dsi: Use intel_display in configure_dual_link_mode   Ankit Nautiyal
• [PATCH 07/19] drm/i915/icl_dsi: Move helpers to configure dsi dual link to intel_dss   Ankit Nautiyal
• [PATCH 08/19] drm/i915/vdsc: Rename helper to check if the pipe supports dsc   Ankit Nautiyal
• [PATCH 09/19] drm/i915/vdsc: Move all dss stuff in dss files   Ankit Nautiyal
• [PATCH 10/19] drm/i915/dss: Use struct intel_display in dss dsc helpers   Ankit Nautiyal
• [PATCH 11/19] drm/i915/display: Move dss stuff in intel_dss files   Ankit Nautiyal
• [PATCH 12/19] drm/i915/display: Rename static functions that use joiner   Ankit Nautiyal
• [PATCH 13/19] drm/i915/display: Separate out joiner stuff in a new file   Ankit Nautiyal
• [PATCH 14/19] drm/i915/display: Move intel_crtc_joined_pipe_mask to intel_joiner   Ankit Nautiyal
• [PATCH 15/19] drm/i915/display: Move helpers for primary joiner to intel_joiner   Ankit Nautiyal
• [PATCH 16/19] drm/i915/display: Move intel_crtc_is_joiner_secondary to intel_joiner   Ankit Nautiyal
• [PATCH 17/19] drm/i915/display: Move intel_crtc_joiner_secondary_pipes to intel_joiner   Ankit Nautiyal
• [PATCH 18/19] drm/i915/joiner: Use struct intel_display in intel_joiner_enabled_pipes   Ankit Nautiyal
• [PATCH 19/19] drm/i915/joiner: Use struct intel_display in intel_joiner_supported_pipes   Ankit Nautiyal
• [PATCH 2/2] drm/i915/display: Call panel_fitting from pipe_config   Nautiyal, Ankit K
• [PATCH 1/2] drm/i915/display: Refactor pch_panel_fitting to use local variables for crtc dimensions   Nautiyal, Ankit K
• [PATCH 4/5] drm/i915/pll_algorithm: Compute C10 HDMI PLLs with algorithm   Nautiyal, Ankit K
• [PATCH 2/2] drm/i915/display: Call panel_fitting from pipe_config   Nautiyal, Ankit K
• [PATCH] drm/i915/hdcp: Use correct cp_irq_count   Nautiyal, Ankit K
• [PATCH 05/12] drm/i915: Add some essential functionality for joiners   Nautiyal, Ankit K
• [PATCH 05/12] drm/i915: Add some essential functionality for joiners   Nautiyal, Ankit K
• [PATCH 00/12] Consolidation of DSS Control in Separate Files   Nautiyal, Ankit K
• [PATCH 05/12] drm/i915/vdsc: Rename helper to check if the pipe supports dsc   Nautiyal, Ankit K
• [PATCH 03/14] drm/dp_mst: Simplify the condition when to enumerate path resources   Manasi Navare
• [PATCH] drm/i915/gt: Delete sysfs entries for engines on driver unload   Krzysztof Niemiec
• [PATCH] drm/i915/gt: Delete sysfs entries for engines on driver unload   Krzysztof Niemiec
• [PATCH] drm/i915/gem: Improve pfn calculation readability in vm_fault_gtt()   Krzysztof Niemiec
• [core-for-CI PATCH] scsi: sd: Move sd_read_cpr() out of the q->limits_lock region   Jani Nikula
• [PATCH 2/9] drm/i915: Use backlight power constants   Jani Nikula
• [PATCH] drm/i915/display: correct dual pps handling for MTL_PCH+   Jani Nikula
• [PATCH] drm/i915/display: Fix lfp_vbt_mode memory leak   Jani Nikula
• [PATCH 05/10] drm/i915 & drm/xe: save struct drm_device to drvdata   Jani Nikula
• [PATCH] drm/i915: Implement Dbuf overlap detection feature starting from LNL   Jani Nikula
• [PATCH 02/10] drm/xe: add kdev_to_xe_device() helper and use it   Jani Nikula
• [PATCH 03/10] drm/xe/tests: fix drvdata usage   Jani Nikula
• [PATCH 03/10] drm/xe/tests: fix drvdata usage   Jani Nikula
• [PATCH 0/3] drm/i915: remove __i915_printk()   Jani Nikula
• [PATCH 1/3] drm/i915: remove a few __i915_printk() uses   Jani Nikula
• [PATCH 2/3] drm/i915: remove i915_report_error()   Jani Nikula
• [PATCH 3/3] drm/i915: remove __i915_printk()   Jani Nikula
• [PATCH 4/5] drm/i915/pll_algorithm: Compute C10 HDMI PLLs with algorithm   Jani Nikula
• [PATCH 09/10] drm/i915/hdcp: migrate away from kdev_to_i915() in GSC messaging   Jani Nikula
• [PATCH 09/10] drm/i915/hdcp: migrate away from kdev_to_i915() in GSC messaging   Jani Nikula
• [PATCH 1/5] drm/i915/display: Add support for histogram   Jani Nikula
• [PATCH 2/5] drm/i915/display: histogram interrupt handling   Jani Nikula
• [PATCH 5/5] drm/i915/display/histogram: Histogram changes for Display LNL+   Jani Nikula
• [PATCH 1/5] drm/i915/display: Add support for histogram   Jani Nikula
• [PATCH 1/3] drm/i915: remove a few __i915_printk() uses   Jani Nikula
• [PATCH 3/3] drm/i915: remove __i915_printk()   Jani Nikula
• [core-for-CI PATCH] usb: typec: ucsi: Fix a potential deadlock in ucsi_send_command_common()   Jani Nikula
• [PATCH 0/2] Trivial double space style fix   Jani Nikula
• [PATCH] drm/xe/pm: Change HPD to polling on runtime suspend   Jani Nikula
• [RFC] Add AS_SDP to fastset   Jani Nikula
• [PATCH 0/3] drm/i915: remove __i915_printk()   Jani Nikula
• [PATCH v2 00/10] drm/xe & drm/i915: drvdata usage changes   Jani Nikula
• [PATCH v2 01/10] drm/xe/tests: remove unused leftover xe_call_for_each_device()   Jani Nikula
• [PATCH v2 02/10] drm/xe: use pdev_to_xe_device() instead of pci_get_drvdata() directly   Jani Nikula
• [PATCH v2 03/10] drm/xe: add kdev_to_xe_device() helper and use it   Jani Nikula
• [PATCH v2 04/10] drm/i915: use pdev_to_i915() instead of pci_get_drvdata() directly   Jani Nikula
• [PATCH v2 05/10] drm/i915 & drm/xe: save struct drm_device to drvdata   Jani Nikula
• [PATCH v2 06/10] drm/i915: support struct device and pci_dev in to_intel_display()   Jani Nikula
• [PATCH v2 07/10] drm/i915/audio: migrate away from kdev_to_i915()   Jani Nikula
• [PATCH v2 08/10] drm/i915/hdcp: migrate away from kdev_to_i915() in bind/unbind   Jani Nikula
• [PATCH v2 09/10] drm/i915/hdcp: migrate away from kdev_to_i915() in GSC messaging   Jani Nikula
• [PATCH v2 10/10] drm/xe/display: remove unused compat kdev_to_i915() and pdev_to_i915()   Jani Nikula
• [PATCHv2] drm/xe/display: Change HPD to polling on runtime suspend   Jani Nikula
• [PATCH] drm/i915/hdcp: Use correct cp_irq_count   Jani Nikula
• [PATCH v2 00/10] drm/xe & drm/i915: drvdata usage changes   Jani Nikula
• [PATCH v2 00/10] drm/xe & drm/i915: drvdata usage changes   Jani Nikula
• [PATCH v2 0/4] drm/i915: struct intel_display conversions   Jani Nikula
• [PATCH v2 1/4] drm/i915/acpi: convert to struct intel_display   Jani Nikula
• [PATCH v2 2/4] drm/i915/opregion: unify intel_encoder/intel_connector naming   Jani Nikula
• [PATCH v2 3/4] drm/i915/opregion: convert to struct intel_display   Jani Nikula
• [PATCH v2 4/4] drm/i915/bios: convert to struct intel_display   Jani Nikula
• ✗ Fi.CI.BUILD: failure for drm/xe/display: Change HPD to polling on runtime suspend (rev2)   Jani Nikula
• [PATCH v2 0/4] drm/i915: struct intel_display conversions   Jani Nikula
• [PATCH] drm/i915: use pdev_to_i915() instead of pci_get_drvdata() directly   Jani Nikula
• [PATCH v2 00/10] drm/xe & drm/i915: drvdata usage changes   Jani Nikula
• [PATCH] drm/i915: Preserve value of fec_enable calculated before DSC compute config   Jani Nikula
• [RESEND 1/3] drm/mst: switch to guid_t type for GUID   Jani Nikula
• [RESEND 2/3] drm/mst: switch to guid_gen() to generate valid GUIDs   Jani Nikula
• [RESEND 3/3] drm/amd/display: switch to guid_gen() to generate valid GUIDs   Jani Nikula
• [PATCH] drm/i915/bios: Update new entries in VBT BDB block definations   Jani Nikula
• [RESEND 1/2] drm/i915/gvt: stop using drm_edid_block_valid()   Jani Nikula
• [RESEND 2/2] drm/edid: make drm_edid_block_valid() static   Jani Nikula
• [PATCH 2/2] drm/i915/display: Call panel_fitting from pipe_config   Jani Nikula
• [PATCH] drm/i915: use pdev_to_i915() instead of pci_get_drvdata() directly   Jani Nikula
• [PATCH] drm/i915: make __intel_display_power_is_enabled() static   Jani Nikula
• [PATCH 1/7] drm/i915/display: support struct intel_atomic_state in to_intel_display()   Jani Nikula
• [PATCH 2/7] drm/i915/display: convert intel_link_bw.c to struct intel_display   Jani Nikula
• [PATCH 3/7] drm/i915/display: convert intel_load_detect.c to struct intel_display   Jani Nikula
• [PATCH 4/7] drm/i915/alpm: convert to struct intel_display   Jani Nikula
• [PATCH 5/7] drm/i915/lspcon: convert to struct intel_display   Jani Nikula
• [PATCH 6/7] drm/i915/display: convert dp aux backlight to struct intel_display   Jani Nikula
• [PATCH 7/7] drm/i915/hti: convert to struct intel_display   Jani Nikula
• [PATCH] drm/i915: Preserve value of fec_enable calculated before DSC compute config   Jani Nikula
• [PATCH v2 1/2] string: add mem_is_zero() helper to check if memory area is all zeros   Jani Nikula
• [PATCH v2 2/2] drm: use mem_is_zero() instead of !memchr_inv(s, 0, n)   Jani Nikula
• A huge warning in dmesg pointing to drivers/gpu/drm/i915/display/intel_tc.c   Jani Nikula
• [PATCH] drm/i915: make intel_display_power_domain_str() static   Jani Nikula
• [PATCH] drm/i915: make __intel_display_power_is_enabled() static   Jani Nikula
• [RESEND 2/2] drm/edid: make drm_edid_block_valid() static   Jani Nikula
• [PATCH 1/7] drm/i915/display: support struct intel_atomic_state in to_intel_display()   Jani Nikula
• [PATCH] drm/i915: make intel_display_power_domain_str() static   Jani Nikula
• [PATCH v2 2/2] drm: use mem_is_zero() instead of !memchr_inv(s, 0, n)   Jani Nikula
• [PATCH 83/86] drm/{i915,xe}: Run DRM default client setup   Jani Nikula
• [PATCH v2 0/9] drm/i915/display: platform identification with display->is.<PLATFORM>   Jani Nikula
• [PATCH v2 1/9] drm/i915/display: use a macro to initialize subplatforms   Jani Nikula
• [PATCH v2 2/9] drm/i915/display: use a macro to define platform enumerations   Jani Nikula
• [PATCH v2 3/9] drm/i915/display: join the platform and subplatform enums   Jani Nikula
• [PATCH v2 4/9] drm/i915/display: add display platforms structure with platform members   Jani Nikula
• [PATCH v2 5/9] drm/i915/display: add platforms "is" member to struct intel_display   Jani Nikula
• [PATCH v2 6/9] drm/i915/display: remove the display platform enum as unnecessary   Jani Nikula
• [PATCH v2 7/9] drm/i915/display: consider HSW/BDW ULX to also be ULT   Jani Nikula
• [PATCH v2 8/9] drm/i915/display: keep subplatforms next to their platforms   Jani Nikula
• [PATCH v2 9/9] drm/i915/bios: use display->is.PLATFORM instead of IS_PLATFORM()   Jani Nikula
• [PATCH v3] drm/i915/display: add platforms "is" member to struct intel_display   Jani Nikula
• [PATCH v1] drivers:gt:Switch to use kmemdup_array()   Jani Nikula
• [PATCH 0/2] drm/i915 & drm/xe: rawclk freq cleanups   Jani Nikula
• [PATCH 1/2] drm/i915: move rawclk from runtime to display runtime info   Jani Nikula
• [PATCH 2/2] drm/xe/display: drop unused rawclk_freq and RUNTIME_INFO()   Jani Nikula
• [PATCH 00/10] drm/i915/display: identify display steppings in display code   Jani Nikula
• [PATCH 01/10] drm/xe/display: fix compat IS_DISPLAY_STEP() range end   Jani Nikula
• [PATCH 02/10] drm/xe/display: remove intel_display_step_name() to simplify   Jani Nikula
• [PATCH 03/10] drm/xe/display: remove the unused compat HAS_GMD_ID()   Jani Nikula
• [PATCH 04/10] drm/xe/step: define more steppings E-J   Jani Nikula
• [PATCH 05/10] drm/i915/display: rename IS_DISPLAY_IP_RANGE() to IS_DISPLAY_VER_FULL()   Jani Nikula
• [PATCH 06/10] drm/i915/display: rename IS_DISPLAY_IP_STEP() to IS_DISPLAY_VER_STEP()   Jani Nikula
• [PATCH 07/10] drm/i915/display: identify display steppings in display probe   Jani Nikula
• [PATCH 08/10] drm/i915/display: switch to display detected steppings   Jani Nikula
• [PATCH 09/10] drm/i915: remove display stepping handling   Jani Nikula
• [PATCH 10/10] drm/xe: remove display stepping handling   Jani Nikula
• [PATCH 2/2] drm/xe/display: drop unused rawclk_freq and RUNTIME_INFO()   Jani Nikula
• [PATCH 07/10] drm/i915/display: identify display steppings in display probe   Jani Nikula
• [PATCH v2] drm/i915/display: identify display steppings in display probe   Jani Nikula
• [PATCH 1/2] drm/i915/display: Add mechanism to use sink model when applying quirk   Jani Nikula
• [PATCH 2/2] drm/i915/display: Increase Fast Wake Sync length as a quirk   Jani Nikula
• [PATCH] drm/i915/dp_mst: Fix MST state after a sink reset   Jani Nikula
• [PATCH v2] drm/i915/display: identify display steppings in display probe   Jani Nikula
• [PATCH] drm/i915/dp_mst: Fix MST state after a sink reset   Jani Nikula
• [PATCH 00/10] drm/i915/display: identify display steppings in display code   Jani Nikula
• [PATCH 00/10] drm/i915/display: identify display steppings in display code   Jani Nikula
• [PATCH] drm/i915: remove unused leftover basedie step code   Jani Nikula
• [PATCH] drm/i915/dp_mst: Fix MST state after a sink reset   Jani Nikula
• [PATCH 0/7] drm/i915/display: conversion to struct intel_display   Jani Nikula
• [PATCH 1/7] drm/i915/vblank: use drm_crtc_vblank_crtc() instead of open-coding   Jani Nikula
• [PATCH 2/7] drm/i915/vblank: fix context imbalance warnings   Jani Nikula
• [PATCH 3/7] drm/i915/vblank: convert to struct intel_display   Jani Nikula
• [PATCH 4/7] drm/i915/vrr: convert to struct intel_display   Jani Nikula
• [PATCH 5/7] drm/i915/tv: convert to struct intel_display   Jani Nikula
• [PATCH 6/7] drm/i915/sprite: convert to struct intel_display   Jani Nikula
• [PATCH 7/7] drm/i915/display: convert params to struct intel_display   Jani Nikula
• [PATCH] drm/i915/dsi: Make Lenovo Yoga Tab 3 X90F DMI match less strict   Jani Nikula
• [PATCH v1] drm/i915/dp: Remove double assignment in intel_dp_compute_as_sdp()   Jani Nikula
• [PATCH 3/7] drm/i915/vblank: convert to struct intel_display   Jani Nikula
• [PATCH 7/7] drm/i915/display: convert params to struct intel_display   Jani Nikula
• [PATCH] drm/i915: remove unnecessary display includes   Jani Nikula
• [PATCH 1/2] drm/ttm: fix kernel-doc typo for @trylock_only   Jani Nikula
• [PATCH 2/2] drm: ensure drm headers are self-contained and pass kernel-doc   Jani Nikula
• [PATCH] drm/i915: remove unnecessary display includes   Jani Nikula
• [PATCH] drm/i915: remove unused leftover basedie step code   Jani Nikula
• [PATCH 1/2] drm/ttm: fix kernel-doc typo for @trylock_only   Jani Nikula
• [PATCH 01/12] drm/i915/display: Move all DSS control registers to a new file   Jani Nikula
• [PATCH 02/12] drm/i915/ddi: Move all mso related helpers to a new file   Jani Nikula
• [PATCH 03/12] drm/i915/dss: Move to struct intel_display   Jani Nikula
• [PATCH 04/12] drm/i915/icl_dsi: Move helpers to configure dsi dual link to intel_dss   Jani Nikula
• [PATCH 06/12] drm/i915/vdsc: Move all dss stuff in dss files   Jani Nikula
• [PATCH 07/12] drm/i915/display: Move dss stuff in intel_dss files   Jani Nikula
• [PATCH 08/12] drm/i915/display: Move helper to get joined pipe mask to intel_dss   Jani Nikula
• [PATCH 00/12] Consolidation of DSS Control in Separate Files   Jani Nikula
• [PATCH 05/12] drm/i915/vdsc: Rename helper to check if the pipe supports dsc   Jani Nikula
• [PATCH 0/7] drm/i915/display: intel_display_types.h cleanup   Jani Nikula
• [PATCH 1/7] drm/i915/wm: move struct intel_watermark_params to i9xx_wm.c   Jani Nikula
• [PATCH 2/7] drm/i915/hdcp: split out intel_hdcp_shim.h for struct intel_hdcp_shim   Jani Nikula
• [PATCH 3/7] drm/i915/display: include drm/drm_probe_helper.h where needed   Jani Nikula
• [PATCH 4/7] drm/i915/display: include drm/drm_vblank.h where needed   Jani Nikula
• [PATCH 5/7] drm/i915/display: include media/cec-notifier.h and linux/debugfs.h where needed   Jani Nikula
• [PATCH 6/7] drm/i915/fb: hide the guts of intel_fb_obj()   Jani Nikula
• [PATCH 7/7] drm/i915/display: drop extra includes from intel_display_types.h   Jani Nikula
• [PATCH] drm/i915/display: BMG supports UHBR13.5   Jani Nikula
• [PATCH] drm/i915/display: BMG supports UHBR13.5   Jani Nikula
• [PATCH] drm/i915/display: BMG supports UHBR13.5   Jani Nikula
• [PATCH] drm: Fix kerneldoc for "Returns" section   Jani Nikula
• ✗ Fi.CI.IGT: failure for drm/i915/display: correct dual pps handling for MTL_PCH+   Jani Nikula
• [PATCH] drm/i915/display: use old bpp as a base when modeset is not allowed   Jani Nikula
• [PATCH v2] drm/i915/display: include media/cec-notifier.h and linux/debugfs.h where needed   Jani Nikula
• [PATCH] drm/i915/dmc: Hardcode path to MTL DMC v2.23   Jani Nikula
• [PATCH 0/2] drm/i915: nomodeset and i915.modeset cleanups   Jani Nikula
• [PATCH 1/2] drm/i915: fail module probe on nomodeset and i915.modeset=0   Jani Nikula
• [PATCH 2/2] drm/i915: deprecate the i915.modeset module parameter   Jani Nikula
• [PATCHv2] drm/i915/display: BMG supports UHBR13.5   Jani Nikula
• [RESEND 3/3] drm/amd/display: switch to guid_gen() to generate valid GUIDs   Jani Nikula
• [RESEND 3/3] drm/amd/display: switch to guid_gen() to generate valid GUIDs   Jani Nikula
• [RESEND 3/3] drm/amd/display: switch to guid_gen() to generate valid GUIDs   Jani Nikula
• [RESEND 3/3] drm/amd/display: switch to guid_gen() to generate valid GUIDs   Jani Nikula
• ✓ Fi.CI.BAT: success for drm/i915: nomodeset and i915.modeset cleanups (rev2)   Jani Nikula
• [PATCHv2] drm/i915/display: BMG supports UHBR13.5   Jani Nikula
• [PATCH v2 0/6] drm/xe & drm/i915: drvdata usage changes follow-up   Jani Nikula
• [PATCH v2 1/6] drm/i915 & drm/xe: save struct drm_device to drvdata   Jani Nikula
• [PATCH v2 2/6] drm/i915: support struct device and pci_dev in to_intel_display()   Jani Nikula
• [PATCH v2 3/6] drm/i915/audio: migrate away from kdev_to_i915()   Jani Nikula
• [PATCH v2 4/6] drm/i915/hdcp: migrate away from kdev_to_i915() in bind/unbind   Jani Nikula
• [PATCH v2 5/6] drm/i915/hdcp: migrate away from kdev_to_i915() in GSC messaging   Jani Nikula
• [PATCH v2 6/6] drm/xe/display: remove unused compat kdev_to_i915() and pdev_to_i915()   Jani Nikula
• [PATCH v1 0/2] drm/i915/fence: A couple of build fixes   Jani Nikula
• [PATCH v1 0/2] drm/i915/fence: A couple of build fixes   Jani Nikula
• [4/5] drm/i915/display: Add registers and compute the strength   Jani Nikula
• [PATCH 00/11] drm/i915/display: hdmi and dp related struct intel_display conversions   Jani Nikula
• [PATCH 01/11] drm/xe/display: use xe && 0 to avoid warnings about unused variables   Jani Nikula
• [PATCH 02/11] drm/i915/hdmi: convert to struct intel_display   Jani Nikula
• [PATCH 03/11] drm/i915/dp: convert g4x_dp.[ch] to struct intel_display   Jani Nikula
• [PATCH 04/11] drm/i915/dp: convert intel_dp_tunnel.[ch] to struct intel_display   Jani Nikula
• [PATCH 05/11] drm/i915/dp: convert intel_dp_aux.[ch] to struct intel_display   Jani Nikula
• [PATCH 06/11] drm/i915/dp: convert intel_dp_link_training.[ch] to struct intel_display   Jani Nikula
• [PATCH 07/11] drm/i915/pps: pass intel_dp to pps_name()   Jani Nikula
• [PATCH 08/11] drm/i915/pps: convert intel_pps.[ch] to struct intel_display   Jani Nikula
• [PATCH 09/11] drm/i915/psr: convert intel_psr.[ch] to struct intel_display   Jani Nikula
• [PATCH 10/11] drm/i915/ddi: stop using dp_to_i915()   Jani Nikula
• [PATCH 11/11] drm/i915/dp: hide dp_to_i915() inside intel_dp.c   Jani Nikula
• [PATCH v2 1/2] drm/i915/display: Add mechanism to use sink model when applying quirk   Jani Nikula
• [PATCH v4] drm/i915/hwmon: expose fan speed   Nilawar, Badal
• [PATCH v4] drm/i915/hwmon: expose fan speed   Nilawar, Badal
• [PATCH v7] drm/i915/hwmon: expose fan speed   Nilawar, Badal
• ✗ Fi.CI.IGT: failure for drm/i915/guc: Pick GuC from CI folder for ADLP,DG1,DG2,TGL,MTL   Patchwork
• ✗ Fi.CI.IGT: failure for drm/i915: remove unused HAS_BROKEN_CS_TLB()   Patchwork
• ✗ Fi.CI.BAT: failure for drm/i915: Add Wa_14019789679 (rev5)   Patchwork
• ✓ Fi.CI.IGT: success for drm: Use backlight power constants   Patchwork
• ✗ Fi.CI.IGT: failure for drm/i915/guc: Pick GuC from CI folder for ADLP,DG1,DG2,TGL,MTL (rev2)   Patchwork
• ✗ Fi.CI.IGT: failure for drm/i915/display: Fix lfp_vbt_mode memory leak   Patchwork
• ✗ Fi.CI.CHECKPATCH: warning for scsi: sd: Move sd_read_cpr() out of the q->limits_lock region   Patchwork
• ✓ Fi.CI.BAT: success for scsi: sd: Move sd_read_cpr() out of the q->limits_lock region   Patchwork
• ✓ Fi.CI.BAT: success for drm/i915/display: correct dual pps handling for MTL_PCH+   Patchwork
• ✓ Fi.CI.BAT: success for drm/i915/gt: Delete sysfs entries for engines on driver unload   Patchwork
• ✗ Fi.CI.CHECKPATCH: warning for drm/i915: ARL requires a newer GSC firmware   Patchwork
• ✗ Fi.CI.SPARSE: warning for drm/i915: ARL requires a newer GSC firmware   Patchwork
• ✓ Fi.CI.BAT: success for drm/i915: ARL requires a newer GSC firmware   Patchwork
• ✗ Fi.CI.IGT: failure for scsi: sd: Move sd_read_cpr() out of the q->limits_lock region   Patchwork
• ✗ Fi.CI.BUILD: failure for RFC: drm/drm_plane: Expose the plane capability and interoperability (rev2)   Patchwork
• ✗ Fi.CI.IGT: failure for drm/i915/display: correct dual pps handling for MTL_PCH+   Patchwork
• ✗ Fi.CI.IGT: failure for drm/i915/gt: Delete sysfs entries for engines on driver unload   Patchwork
• ✗ Fi.CI.CHECKPATCH: warning for Fix mmap memory boundary calculation   Patchwork
• ✓ Fi.CI.BAT: success for Fix mmap memory boundary calculation   Patchwork
• ✓ Fi.CI.BAT: success for drm/i915: Add Wa_14019789679 (rev5)   Patchwork
• ✗ Fi.CI.IGT: failure for drm/i915: ARL requires a newer GSC firmware   Patchwork
• ✗ Fi.CI.IGT: failure for Fix mmap memory boundary calculation   Patchwork
• ✗ Fi.CI.IGT: failure for drm/i915: Add Wa_14019789679 (rev5)   Patchwork
• ✓ Fi.CI.BAT: success for Consider joiner calculation for panel fitting (rev2)   Patchwork
• ✗ Fi.CI.CHECKPATCH: warning for Fix mmap memory boundary calculation (rev2)   Patchwork
• ✓ Fi.CI.BAT: success for Fix mmap memory boundary calculation (rev2)   Patchwork
• ✓ Fi.CI.BAT: success for drm/i915: Add Wa_14019789679 (rev6)   Patchwork
• ✗ Fi.CI.CHECKPATCH: warning for drm/i915: Implement Dbuf overlap detection feature starting from LNL   Patchwork
• ✗ Fi.CI.SPARSE: warning for drm/i915: Implement Dbuf overlap detection feature starting from LNL   Patchwork
• ✓ Fi.CI.BAT: success for drm/i915: Implement Dbuf overlap detection feature starting from LNL   Patchwork
• ✓ Fi.CI.BAT: success for i915: change pr_info to pr_info_ratelimited   Patchwork
• ✗ Fi.CI.CHECKPATCH: warning for i915: change pr_info to pr_info_ratelimited   Patchwork
• ✗ Fi.CI.CHECKPATCH: warning for drm/i915: Dump DSC HW state   Patchwork
• ✗ Fi.CI.SPARSE: warning for drm/i915: Dump DSC HW state   Patchwork
• ✓ Fi.CI.BAT: success for drm/i915: Dump DSC HW state   Patchwork
• ✓ Fi.CI.BAT: success for drm/i915: Fix ttm small BAR placement handling   Patchwork
• ✓ Fi.CI.BAT: success for drm/i915: Explicitly cast divisor and use div_u64()   Patchwork
• ✗ Fi.CI.IGT: failure for Consider joiner calculation for panel fitting (rev2)   Patchwork
• ✓ Fi.CI.IGT: success for drm/i915: Add Wa_14019789679 (rev5)   Patchwork
• ✗ Fi.CI.IGT: failure for Fix mmap memory boundary calculation (rev2)   Patchwork
• ✗ Fi.CI.IGT: failure for drm/i915: Add Wa_14019789679 (rev6)   Patchwork
• ✗ Fi.CI.IGT: failure for drm/i915: Implement Dbuf overlap detection feature starting from LNL   Patchwork
• ✗ Fi.CI.IGT: failure for i915: change pr_info to pr_info_ratelimited   Patchwork
• ✗ Fi.CI.IGT: failure for drm/i915: Dump DSC HW state   Patchwork
• ✓ Fi.CI.BAT: success for drm/i915/dg2: Enable Wa_14019159160 for DG2   Patchwork
• ✓ Fi.CI.IGT: success for drm/i915: Fix ttm small BAR placement handling   Patchwork
• ✗ Fi.CI.IGT: failure for drm/i915: Explicitly cast divisor and use div_u64()   Patchwork
• ✓ Fi.CI.IGT: success for drm/i915: Add Wa_14019789679 (rev5)   Patchwork
• ✓ Fi.CI.IGT: success for drm/i915: Add Wa_14019789679 (rev5)   Patchwork
• ✗ Fi.CI.IGT: failure for drm/i915/dg2: Enable Wa_14019159160 for DG2   Patchwork
• ✓ Fi.CI.BAT: success for drm/xe/pm: Change HPD to polling on runtime suspend   Patchwork
• ✗ Fi.CI.IGT: failure for drm/xe/pm: Change HPD to polling on runtime suspend   Patchwork
• ✗ Fi.CI.CHECKPATCH: warning for Add HDMI PLL Algorithm for SNPS/C10PHY (rev2)   Patchwork
• ✗ Fi.CI.SPARSE: warning for Add HDMI PLL Algorithm for SNPS/C10PHY (rev2)   Patchwork
• ✓ Fi.CI.BAT: success for Add HDMI PLL Algorithm for SNPS/C10PHY (rev2)   Patchwork
• ✓ Fi.CI.BAT: success for drm/i915: remove __i915_printk()   Patchwork
• ✗ Fi.CI.CHECKPATCH: warning for drm/i915: remove __i915_printk()   Patchwork
• ✗ Fi.CI.SPARSE: warning for drm/i915: remove __i915_printk()   Patchwork
• ✗ Fi.CI.IGT: failure for Add HDMI PLL Algorithm for SNPS/C10PHY (rev2)   Patchwork
• ✗ Fi.CI.BUILD: failure for cdc4ad36a8: kernel_BUG_at_include/linux/page-flags.h   Patchwork
• ✓ Fi.CI.BAT: success for drm/i915/bmg: Read display register timeout (rev2)   Patchwork
• ✗ Fi.CI.IGT: failure for drm/i915: remove __i915_printk()   Patchwork
• ✓ Fi.CI.BAT: success for usb: typec: ucsi: Fix a potential deadlock in ucsi_send_command_common()   Patchwork
• ✗ Fi.CI.IGT: failure for drm/i915/bmg: Read display register timeout (rev2)   Patchwork
• ✗ Fi.CI.IGT: failure for usb: typec: ucsi: Fix a potential deadlock in ucsi_send_command_common()   Patchwork
• ✗ Fi.CI.SPARSE: warning for drm/i915/gt: Mark the GT as dead when mmio is unreliable   Patchwork
• ✓ Fi.CI.BAT: success for drm/i915/gt: Mark the GT as dead when mmio is unreliable   Patchwork
• ✓ Fi.CI.BAT: success for Allow partial memory mapping for cpu memory   Patchwork
• ✓ Fi.CI.BAT: success for drm/i915/gem: Improve pfn calculation readability in vm_fault_gtt()   Patchwork
• ✓ Fi.CI.BAT: success for drm/i915/hwmon: expose fan speed (rev3)   Patchwork
• ✗ Fi.CI.CHECKPATCH: warning for Trivial double space style fix   Patchwork
• ✗ Fi.CI.SPARSE: warning for Trivial double space style fix   Patchwork
• ✗ Fi.CI.BUILD: failure for drm/i915/dp_mst: Fix MST state after a sink reset (rev2)   Patchwork
• ✗ Fi.CI.BAT: failure for Trivial double space style fix   Patchwork
• ✗ Fi.CI.CHECKPATCH: warning for Trivial double space style fix (rev2)   Patchwork
• ✗ Fi.CI.SPARSE: warning for Trivial double space style fix (rev2)   Patchwork
• ✗ Fi.CI.BAT: failure for Trivial double space style fix (rev2)   Patchwork
• ✓ Fi.CI.BAT: success for drm/i915/bmg: Read display register timeout (rev3)   Patchwork
• ✗ Fi.CI.CHECKPATCH: warning for Trivial double space style fix (rev3)   Patchwork
• ✗ Fi.CI.SPARSE: warning for Trivial double space style fix (rev3)   Patchwork
• ✓ Fi.CI.BAT: success for Trivial double space style fix (rev3)   Patchwork
• ✗ Fi.CI.IGT: failure for drm/i915/gt: Mark the GT as dead when mmio is unreliable   Patchwork
• ✗ Fi.CI.IGT: failure for Allow partial memory mapping for cpu memory   Patchwork
• ✓ Fi.CI.BAT: success for Allow partial memory mapping for cpu memory (rev2)   Patchwork
• ✗ Fi.CI.SPARSE: warning for drm/i915/gt: Mark the GT as dead when mmio is unreliable (rev2)   Patchwork
• ✓ Fi.CI.BAT: success for drm/i915/gt: Mark the GT as dead when mmio is unreliable (rev2)   Patchwork
• ✗ Fi.CI.IGT: failure for drm/i915/gem: Improve pfn calculation readability in vm_fault_gtt()   Patchwork
• ✗ Fi.CI.IGT: failure for drm/i915/hwmon: expose fan speed (rev3)   Patchwork
• ✓ Fi.CI.BAT: success for Consider joiner calculation for panel fitting (rev3)   Patchwork
• ✗ Fi.CI.IGT: failure for drm/i915/bmg: Read display register timeout (rev3)   Patchwork
• ✗ Fi.CI.IGT: failure for Trivial double space style fix (rev3)   Patchwork
• ✗ Fi.CI.BUILD: failure for drm/xe/pm: Change HPD to polling on runtime suspend (rev2)   Patchwork
• ✗ Fi.CI.BUILD: failure for drm/xe/display: Change HPD to polling on runtime suspend   Patchwork
• ✗ Fi.CI.IGT: failure for Allow partial memory mapping for cpu memory (rev2)   Patchwork
• ✗ Fi.CI.IGT: failure for drm/i915/gt: Mark the GT as dead when mmio is unreliable (rev2)   Patchwork
• ✗ Fi.CI.IGT: failure for Consider joiner calculation for panel fitting (rev3)   Patchwork
• ✓ Fi.CI.BAT: success for drm/i915/gt: Mark the GT as dead when mmio is unreliable (rev3)   Patchwork
• ✗ Fi.CI.SPARSE: warning for drm/i915/gt: Mark the GT as dead when mmio is unreliable (rev3)   Patchwork
• ✗ Fi.CI.CHECKPATCH: warning for Add AS_SDP to fastset   Patchwork
• ✓ Fi.CI.BAT: success for Add AS_SDP to fastset   Patchwork
• ✗ Fi.CI.IGT: failure for drm/i915/gt: Mark the GT as dead when mmio is unreliable (rev3)   Patchwork
• ✗ Fi.CI.IGT: failure for Add AS_SDP to fastset   Patchwork
• ✗ Fi.CI.SPARSE: warning for drm/xe & drm/i915: drvdata usage changes (rev2)   Patchwork
• ✓ Fi.CI.BAT: success for drm/xe & drm/i915: drvdata usage changes (rev2)   Patchwork
• ✗ Fi.CI.SPARSE: warning for drm/i915/gt: Mark the GT as dead when mmio is unreliable (rev4)   Patchwork
• ✗ Fi.CI.BAT: failure for drm/i915/gt: Mark the GT as dead when mmio is unreliable (rev4)   Patchwork
• ✗ Fi.CI.IGT: failure for drm/xe & drm/i915: drvdata usage changes (rev2)   Patchwork
• ✓ Fi.CI.BAT: success for drm/i915/guc: Change GEM_WARN_ON to guc_err to prevent taints in CI   Patchwork
• ✗ Fi.CI.SPARSE: warning for drm/i915/gt: Mark the GT as dead when mmio is unreliable (rev5)   Patchwork
• ✓ Fi.CI.BAT: success for drm/i915/gt: Mark the GT as dead when mmio is unreliable (rev5)   Patchwork
• ✓ Fi.CI.BAT: success for drm/i915/guc: Fix missing enable of Wa_14019159160 on ARL   Patchwork
• ✓ Fi.CI.BAT: success for drm/i915/hdcp: Use correct cp_irq_count   Patchwork
• ✓ Fi.CI.BAT: success for drm/i915/hwmon: expose fan speed (rev4)   Patchwork
• ✗ Fi.CI.IGT: failure for drm/i915/guc: Change GEM_WARN_ON to guc_err to prevent taints in CI   Patchwork
• ✗ Fi.CI.IGT: failure for drm/i915/gt: Mark the GT as dead when mmio is unreliable (rev5)   Patchwork
• ✗ Fi.CI.IGT: failure for drm/i915/guc: Fix missing enable of Wa_14019159160 on ARL   Patchwork
• ✓ Fi.CI.BAT: success for drm/i915/hdcp: Use correct cp_irq_count (rev2)   Patchwork
• ✗ Fi.CI.SPARSE: warning for drm/i915: struct intel_display conversions (rev2)   Patchwork
• ✓ Fi.CI.BAT: success for drm/i915: struct intel_display conversions (rev2)   Patchwork
• ✗ Fi.CI.CHECKPATCH: warning for video/aperture: match the pci device when calling sysfb_disable()   Patchwork
• ✓ Fi.CI.BAT: success for video/aperture: match the pci device when calling sysfb_disable()   Patchwork
• ✗ Fi.CI.IGT: failure for drm/i915/hdcp: Use correct cp_irq_count   Patchwork
• ✗ Fi.CI.IGT: failure for drm/i915/hwmon: expose fan speed (rev4)   Patchwork
• ✓ Fi.CI.IGT: success for drm/i915/bmg: Read display register timeout (rev3)   Patchwork
• ✗ Fi.CI.IGT: failure for drm/i915/hdcp: Use correct cp_irq_count (rev2)   Patchwork
• ✗ Fi.CI.IGT: failure for drm/i915: struct intel_display conversions (rev2)   Patchwork
• ✗ Fi.CI.IGT: failure for video/aperture: match the pci device when calling sysfb_disable()   Patchwork
• ✗ Fi.CI.BUILD: failure for drm/xe/display: Change HPD to polling on runtime suspend (rev2)   Patchwork
• ✓ Fi.CI.BAT: success for drm/i915/hwmon: expose fan speed (rev5)   Patchwork
• ✗ Fi.CI.BAT: failure for drm/i915: Preserve value of fec_enable calculated before DSC compute config   Patchwork
• ✓ Fi.CI.BAT: success for drm/i915: use pdev_to_i915() instead of pci_get_drvdata() directly   Patchwork
• ✓ Fi.CI.BAT: success for drm/xe/display: Change HPD to polling on runtime suspend (rev3)   Patchwork
• ✗ Fi.CI.SPARSE: warning for series starting with [RESEND,1/3] drm/mst: switch to guid_t type for GUID   Patchwork
• ✓ Fi.CI.BAT: success for series starting with [RESEND,1/3] drm/mst: switch to guid_t type for GUID   Patchwork
• ✓ Fi.CI.BAT: success for drm/i915/bios: Update new entries in VBT BDB block definations   Patchwork
• ✓ Fi.CI.BAT: success for drm/i915: Explicitly cast divisor and use div_u64() (rev2)   Patchwork
• ✓ Fi.CI.BAT: success for drm/i915: Fix NULL ptr deref in intel_async_flip_check_uapi()   Patchwork
• ✓ Fi.CI.BAT: success for series starting with [RESEND,1/2] drm/i915/gvt: stop using drm_edid_block_valid()   Patchwork
• ✓ Fi.CI.BAT: success for drm/xe: Name and document Wa_14019789679   Patchwork
• ✓ Fi.CI.IGT: success for drm/i915/hwmon: expose fan speed (rev5)   Patchwork
• ✓ Fi.CI.IGT: success for drm/i915: use pdev_to_i915() instead of pci_get_drvdata() directly   Patchwork
• ✓ Fi.CI.IGT: success for drm/xe/display: Change HPD to polling on runtime suspend (rev3)   Patchwork
• ✗ Fi.CI.IGT: failure for series starting with [RESEND,1/3] drm/mst: switch to guid_t type for GUID   Patchwork
• ✗ Fi.CI.CHECKPATCH: warning for Add HDMI PLL Algorithm for SNPS/C10PHY (rev3)   Patchwork
• ✗ Fi.CI.SPARSE: warning for Add HDMI PLL Algorithm for SNPS/C10PHY (rev3)   Patchwork
• ✓ Fi.CI.BAT: success for Add HDMI PLL Algorithm for SNPS/C10PHY (rev3)   Patchwork
• ✗ Fi.CI.IGT: failure for drm/i915/bios: Update new entries in VBT BDB block definations   Patchwork
• ✓ Fi.CI.BAT: success for drm/i915/pps: Disable DPLS_GATING around pps sequence (rev5)   Patchwork
• ✗ Fi.CI.IGT: failure for drm/i915: Explicitly cast divisor and use div_u64() (rev2)   Patchwork
• ✗ Fi.CI.IGT: failure for drm/i915: Fix NULL ptr deref in intel_async_flip_check_uapi()   Patchwork
• ✗ Fi.CI.IGT: failure for series starting with [RESEND,1/2] drm/i915/gvt: stop using drm_edid_block_valid()   Patchwork
• ✗ Fi.CI.IGT: failure for drm/xe: Name and document Wa_14019789679   Patchwork
• ✗ Fi.CI.CHECKPATCH: warning for drm/i915: WA context support for L3flush   Patchwork
• ✗ Fi.CI.SPARSE: warning for drm/i915: WA context support for L3flush   Patchwork
• ✓ Fi.CI.BAT: success for drm/i915: WA context support for L3flush   Patchwork
• ✗ Fi.CI.IGT: failure for Add HDMI PLL Algorithm for SNPS/C10PHY (rev3)   Patchwork
• ✗ Fi.CI.IGT: failure for drm/i915/pps: Disable DPLS_GATING around pps sequence (rev5)   Patchwork
• ✗ Fi.CI.IGT: failure for drm/i915: WA context support for L3flush   Patchwork
• ✗ Fi.CI.SPARSE: warning for drm/i915/gt: remove stray declaration of intel_gt_release_all()   Patchwork
• ✓ Fi.CI.BAT: success for drm/i915/gt: remove stray declaration of intel_gt_release_all()   Patchwork
• ✗ Fi.CI.SPARSE: warning for drm/i915: make __intel_display_power_is_enabled() static   Patchwork
• ✓ Fi.CI.BAT: success for drm/i915: make __intel_display_power_is_enabled() static   Patchwork
• ✗ Fi.CI.SPARSE: warning for series starting with [1/7] drm/i915/display: support struct intel_atomic_state in to_intel_display()   Patchwork
• ✓ Fi.CI.BAT: success for series starting with [1/7] drm/i915/display: support struct intel_atomic_state in to_intel_display()   Patchwork
• ✗ Fi.CI.IGT: failure for drm/i915/gt: remove stray declaration of intel_gt_release_all()   Patchwork
• ✗ Fi.CI.IGT: failure for drm/i915: make __intel_display_power_is_enabled() static   Patchwork
• ✗ Fi.CI.SPARSE: warning for series starting with [v2,1/2] string: add mem_is_zero() helper to check if memory area is all zeros   Patchwork
• ✓ Fi.CI.BAT: success for series starting with [v2,1/2] string: add mem_is_zero() helper to check if memory area is all zeros   Patchwork
• ✗ Fi.CI.IGT: failure for series starting with [1/7] drm/i915/display: support struct intel_atomic_state in to_intel_display()   Patchwork
• ✓ Fi.CI.BAT: success for Allow partial memory mapping for cpu memory   Patchwork
• ✓ Fi.CI.IGT: success for drm/i915/hdcp: Use correct cp_irq_count (rev2)   Patchwork
• ✗ Fi.CI.IGT: failure for series starting with [v2,1/2] string: add mem_is_zero() helper to check if memory area is all zeros   Patchwork
• ✓ Fi.CI.IGT: success for drm/i915/hdcp: Use correct cp_irq_count (rev2)   Patchwork
• ✗ Fi.CI.BAT: failure for drm/i915/bios: Update new entries in VBT BDB block definitions   Patchwork
• ✗ Fi.CI.IGT: failure for Allow partial memory mapping for cpu memory   Patchwork
• ✗ Fi.CI.BAT: failure for drm/i915/gem: Remove unnecessary cast   Patchwork
• ✓ Fi.CI.BAT: success for drm/i915/gem: Remove unnecessary cast (rev2)   Patchwork
• ✓ Fi.CI.BAT: success for Allow partial memory mapping for cpu memory (rev2)   Patchwork
• ✗ Fi.CI.SPARSE: warning for drm/i915: make intel_display_power_domain_str() static   Patchwork
• ✓ Fi.CI.BAT: success for drm/i915: make intel_display_power_domain_str() static   Patchwork
• ✗ Fi.CI.IGT: failure for drm/i915/gem: Remove unnecessary cast (rev2)   Patchwork
• ✗ Fi.CI.IGT: failure for Allow partial memory mapping for cpu memory (rev2)   Patchwork
• ✗ Fi.CI.IGT: failure for drm/i915: make intel_display_power_domain_str() static   Patchwork
• ✗ Fi.CI.CHECKPATCH: warning for Introducing Xe2 ccs modifiers for integrated and discrete graphics   Patchwork
• ✗ Fi.CI.SPARSE: warning for Introducing Xe2 ccs modifiers for integrated and discrete graphics   Patchwork
• ✗ Fi.CI.BAT: failure for Introducing Xe2 ccs modifiers for integrated and discrete graphics   Patchwork
• ✗ Fi.CI.CHECKPATCH: warning for drm: Provide client setup helper and convert drivers   Patchwork
• ✗ Fi.CI.SPARSE: warning for drm: Provide client setup helper and convert drivers   Patchwork
• ✗ Fi.CI.BAT: failure for drm: Provide client setup helper and convert drivers   Patchwork
• ✗ Fi.CI.CHECKPATCH: warning for CCS static load balance (rev2)   Patchwork
• ✗ Fi.CI.SPARSE: warning for CCS static load balance (rev2)   Patchwork
• ✗ Fi.CI.BAT: failure for CCS static load balance (rev2)   Patchwork
• ✓ Fi.CI.BAT: success for drm/i915/psr: Prevent Panel Replay if CRC calculation is enabled   Patchwork
• ✓ Fi.CI.BAT: success for drm/i915/gt: Continue creating engine sysfs files even after a failure   Patchwork
• ✗ Fi.CI.BAT: failure for video/aperture: match the pci device when calling sysfb_disable() (rev2)   Patchwork
• ✗ Fi.CI.CHECKPATCH: warning for drm/i915/display: platform identification with display->is.<PLATFORM> (rev3)   Patchwork
• ✗ Fi.CI.SPARSE: warning for drm/i915/display: platform identification with display->is.<PLATFORM> (rev3)   Patchwork
• ✓ Fi.CI.BAT: success for drm/i915/display: platform identification with display->is.<PLATFORM> (rev3)   Patchwork
• ✗ Fi.CI.IGT: failure for drm/i915/psr: Prevent Panel Replay if CRC calculation is enabled   Patchwork
• ✓ Fi.CI.BAT: success for drm/i915/hwmon: expose fan speed (rev6)   Patchwork
• ✗ Fi.CI.IGT: failure for drm/i915/gt: Continue creating engine sysfs files even after a failure   Patchwork
• ✓ Fi.CI.BAT: success for drm/ci: increase timeout for all jobs   Patchwork
• ✓ Fi.CI.IGT: success for drm/i915/gt: remove stray declaration of intel_gt_release_all()   Patchwork
• ✗ Fi.CI.SPARSE: warning for drm/i915 & drm/xe: rawclk freq cleanups   Patchwork
• ✓ Fi.CI.BAT: success for drm/i915 & drm/xe: rawclk freq cleanups   Patchwork
• ✗ Fi.CI.IGT: failure for drm/i915/display: platform identification with display->is.<PLATFORM> (rev3)   Patchwork
• ✓ Fi.CI.IGT: success for drm/i915/pps: Disable DPLS_GATING around pps sequence (rev5)   Patchwork
• ✓ Fi.CI.IGT: success for drm/i915/hwmon: expose fan speed (rev6)   Patchwork
• ✗ Fi.CI.CHECKPATCH: warning for Increase fastwake sync pulse count as a quirk   Patchwork
• ✓ Fi.CI.BAT: success for Increase fastwake sync pulse count as a quirk   Patchwork
• ✗ Fi.CI.CHECKPATCH: warning for drm/i915/display: identify display steppings in display code   Patchwork
• ✗ Fi.CI.SPARSE: warning for drm/i915/display: identify display steppings in display code   Patchwork
• ✗ Fi.CI.BAT: failure for drm/i915/display: identify display steppings in display code   Patchwork
• ✗ Fi.CI.BUILD: failure for drm/i915/gt: Use kmemdup_array instead of kmemdup for multiple allocation   Patchwork
• ✗ Fi.CI.BAT: failure for drivers:gt:Switch to use kmemdup_array()   Patchwork
• ✓ Fi.CI.BAT: success for drm/i915: Do not attempt to load the GSC multiple times   Patchwork
• ✗ Fi.CI.SPARSE: warning for drm/i915: Do not attempt to load the GSC multiple times   Patchwork
• ✓ Fi.CI.IGT: success for drm/ci: increase timeout for all jobs   Patchwork
• ✗ Fi.CI.IGT: failure for drm/i915 & drm/xe: rawclk freq cleanups   Patchwork
• ✓ Fi.CI.IGT: success for Increase fastwake sync pulse count as a quirk   Patchwork
• ✗ Fi.CI.IGT: failure for drm/i915: Do not attempt to load the GSC multiple times   Patchwork
• ✗ Fi.CI.CHECKPATCH: warning for drm/i915/display: identify display steppings in display code (rev2)   Patchwork
• ✗ Fi.CI.SPARSE: warning for drm/i915/display: identify display steppings in display code (rev2)   Patchwork
• ✓ Fi.CI.BAT: success for drm/i915/display: identify display steppings in display code (rev2)   Patchwork
• ✗ Fi.CI.CHECKPATCH: warning for Display Global Histogram (rev2)   Patchwork
• ✗ Fi.CI.SPARSE: warning for Display Global Histogram (rev2)   Patchwork
• ✗ Fi.CI.IGT: failure for drm/i915/display: identify display steppings in display code (rev2)   Patchwork
• ✗ Fi.CI.BAT: failure for drm/i915/bios: Update new entries in VBT BDB block definitions (rev2)   Patchwork
• ✗ Fi.CI.CHECKPATCH: warning for CCS static load balance (rev3)   Patchwork
• ✗ Fi.CI.SPARSE: warning for CCS static load balance (rev3)   Patchwork
• ✓ Fi.CI.BAT: success for CCS static load balance (rev3)   Patchwork
• ✗ Fi.CI.CHECKPATCH: warning for drm: Provide client setup helper and convert drivers (rev2)   Patchwork
• ✗ Fi.CI.SPARSE: warning for drm: Provide client setup helper and convert drivers (rev2)   Patchwork
• ✗ Fi.CI.BAT: failure for drm: Provide client setup helper and convert drivers (rev2)   Patchwork
• ✓ Fi.CI.BAT: success for drm/i915/gt: Use kmemdup_array instead of kmemdup for multiple allocation (rev2)   Patchwork
• ✗ Fi.CI.IGT: failure for CCS static load balance (rev3)   Patchwork
• ✓ Fi.CI.IGT: success for drm/i915/gt: Use kmemdup_array instead of kmemdup for multiple allocation (rev2)   Patchwork
• ✗ Fi.CI.SPARSE: warning for drm/i915: Do not attempt to load the GSC multiple times (rev2)   Patchwork
• ✓ Fi.CI.BAT: success for drm/i915: Do not attempt to load the GSC multiple times (rev2)   Patchwork
• ✗ Fi.CI.BAT: failure for video/aperture: optionally match the device in sysfb_disable()   Patchwork
• ✗ Fi.CI.IGT: failure for drm/i915: Do not attempt to load the GSC multiple times (rev2)   Patchwork
• ✓ Fi.CI.BAT: success for drm/i915: Do not explicilty enable FEC in DP_TP_CTL for UHBR rates   Patchwork
• ✗ Fi.CI.CHECKPATCH: warning for drm/i915: Implement Dbuf overlap detection feature starting from LNL (rev2)   Patchwork
• ✗ Fi.CI.SPARSE: warning for drm/i915: Implement Dbuf overlap detection feature starting from LNL (rev2)   Patchwork
• ✓ Fi.CI.BAT: success for drm/i915: Implement Dbuf overlap detection feature starting from LNL (rev2)   Patchwork
• ✗ Fi.CI.SPARSE: warning for drm/i915: remove unused leftover basedie step code   Patchwork
• ✗ Fi.CI.BAT: failure for drm/i915: remove unused leftover basedie step code   Patchwork
• ✗ Fi.CI.CHECKPATCH: warning for drm/i915/display: conversion to struct intel_display   Patchwork
• ✗ Fi.CI.SPARSE: warning for drm/i915/display: conversion to struct intel_display   Patchwork
• ✓ Fi.CI.BAT: success for drm/i915/display: conversion to struct intel_display   Patchwork
• ✗ Fi.CI.CHECKPATCH: warning for CCS static load balance (rev4)   Patchwork
• ✗ Fi.CI.SPARSE: warning for CCS static load balance (rev4)   Patchwork
• ✗ Fi.CI.BAT: failure for CCS static load balance (rev4)   Patchwork
• ✓ Fi.CI.BAT: success for drm/i915/hwmon: expose fan speed (rev7)   Patchwork
• ✗ Fi.CI.IGT: failure for drm/i915: Do not explicilty enable FEC in DP_TP_CTL for UHBR rates   Patchwork
• ✗ Fi.CI.IGT: failure for drm/i915: Implement Dbuf overlap detection feature starting from LNL (rev2)   Patchwork
• ✗ Fi.CI.CHECKPATCH: warning for drm/i915: Implement Dbuf overlap detection feature starting from LNL (rev3)   Patchwork
• ✗ Fi.CI.SPARSE: warning for drm/i915: Implement Dbuf overlap detection feature starting from LNL (rev3)   Patchwork
• ✓ Fi.CI.BAT: success for drm/i915: Implement Dbuf overlap detection feature starting from LNL (rev3)   Patchwork
• ✓ Fi.CI.BAT: success for drm/i915/dsi: Make Lenovo Yoga Tab 3 X90F DMI match less strict   Patchwork
• ✓ Fi.CI.IGT: success for drm/i915/display: conversion to struct intel_display   Patchwork
• ✗ Fi.CI.SPARSE: warning for drm/i915: remove unused leftover basedie step code (rev2)   Patchwork
• ✓ Fi.CI.BAT: success for drm/i915: remove unused leftover basedie step code (rev2)   Patchwork
• ✓ Fi.CI.BAT: success for drm/i915/gt: Disable Redundant HZ Plane expansions for MTL/ARL and DG2   Patchwork
• ✓ Fi.CI.BAT: success for drm/i915: remove unnecessary display includes   Patchwork
• ✗ Fi.CI.SPARSE: warning for Increase fastwake sync pulse count as a quirk (rev2)   Patchwork
• ✓ Fi.CI.BAT: success for Increase fastwake sync pulse count as a quirk (rev2)   Patchwork
• ✗ Fi.CI.CHECKPATCH: warning for CCS static load balance   Patchwork
• ✗ Fi.CI.SPARSE: warning for CCS static load balance   Patchwork
• ✗ Fi.CI.BAT: failure for CCS static load balance   Patchwork
• ✗ Fi.CI.CHECKPATCH: warning for series starting with [1/2] drm/ttm: fix kernel-doc typo for @trylock_only   Patchwork
• ✓ Fi.CI.BAT: success for series starting with [1/2] drm/ttm: fix kernel-doc typo for @trylock_only   Patchwork
• ✗ Fi.CI.CHECKPATCH: warning for CCS static load balance (rev2)   Patchwork
• ✗ Fi.CI.SPARSE: warning for CCS static load balance (rev2)   Patchwork
• ✓ Fi.CI.BAT: success for CCS static load balance (rev2)   Patchwork
• ✗ Fi.CI.CHECKPATCH: warning for drm/i915/dp_mst: Fix MST state after a sink reset (rev3)   Patchwork
• ✓ Fi.CI.BAT: success for drm/i915/dp_mst: Fix MST state after a sink reset (rev3)   Patchwork
• ✓ Fi.CI.BAT: success for drm: Use full allocated minor range for DRM (rev4)   Patchwork
• ✗ Fi.CI.SPARSE: warning for drm: Use full allocated minor range for DRM (rev4)   Patchwork
• ✗ Fi.CI.IGT: failure for drm/i915/hwmon: expose fan speed (rev7)   Patchwork
• ✗ Fi.CI.IGT: failure for drm/i915: Implement Dbuf overlap detection feature starting from LNL (rev3)   Patchwork
• ✗ Fi.CI.IGT: failure for drm/i915/dsi: Make Lenovo Yoga Tab 3 X90F DMI match less strict   Patchwork
• ✗ Fi.CI.IGT: failure for drm/i915: remove unused leftover basedie step code (rev2)   Patchwork
• ✗ Fi.CI.IGT: failure for drm/i915/gt: Disable Redundant HZ Plane expansions for MTL/ARL and DG2   Patchwork
• ✗ Fi.CI.IGT: failure for drm/i915: remove unnecessary display includes   Patchwork
• ✗ Fi.CI.IGT: failure for Increase fastwake sync pulse count as a quirk (rev2)   Patchwork
• ✗ Fi.CI.IGT: failure for series starting with [1/2] drm/ttm: fix kernel-doc typo for @trylock_only   Patchwork
• ✗ Fi.CI.IGT: failure for CCS static load balance (rev2)   Patchwork
• ✗ Fi.CI.IGT: failure for drm/i915/dp_mst: Fix MST state after a sink reset (rev3)   Patchwork
• ✗ Fi.CI.IGT: failure for drm: Use full allocated minor range for DRM (rev4)   Patchwork
• ✓ Fi.CI.BAT: success for drm/i915/gt: Disable Redundant HZ Plane expansions for MTL/ARL and DG2 (rev2)   Patchwork
• ✗ Fi.CI.IGT: failure for drm/i915/gt: Disable Redundant HZ Plane expansions for MTL/ARL and DG2 (rev2)   Patchwork
• ✗ Fi.CI.CHECKPATCH: warning for drm/xe: Align all VRAM scanout buffers to 64k physical pages when needed.   Patchwork
• ✓ Fi.CI.BAT: success for drm/xe: Align all VRAM scanout buffers to 64k physical pages when needed.   Patchwork
• ✓ Fi.CI.BAT: success for drm/i915/display: use old bpp as a base when modeset is not allowed   Patchwork
• ✗ Fi.CI.CHECKPATCH: warning for Consolidation of DSS Control in Separate Files   Patchwork
• ✗ Fi.CI.SPARSE: warning for Consolidation of DSS Control in Separate Files   Patchwork
• ✓ Fi.CI.BAT: success for Consolidation of DSS Control in Separate Files   Patchwork
• ✓ Fi.CI.BAT: success for drm/i915/dp: Remove double assignment in intel_dp_compute_as_sdp()   Patchwork
• ✗ Fi.CI.SPARSE: warning for drm/i915/gt: Use kmemdup_array instead of kmemdup for multiple allocation (rev3)   Patchwork
• ✗ Fi.CI.BAT: failure for drm/i915/gt: Use kmemdup_array instead of kmemdup for multiple allocation (rev3)   Patchwork
• ✗ Fi.CI.CHECKPATCH: warning for drm/i915/display: intel_display_types.h cleanup   Patchwork
• ✗ Fi.CI.SPARSE: warning for drm/i915/display: intel_display_types.h cleanup   Patchwork
• ✗ Fi.CI.BAT: failure for drm/i915/display: intel_display_types.h cleanup   Patchwork
• ✗ Fi.CI.CHECKPATCH: warning for drm/xe: Align all VRAM scanout buffers to 64k physical pages when needed. (rev2)   Patchwork
• ✗ Fi.CI.SPARSE: warning for drm/xe: Align all VRAM scanout buffers to 64k physical pages when needed. (rev2)   Patchwork
• ✓ Fi.CI.BAT: success for drm/xe: Align all VRAM scanout buffers to 64k physical pages when needed. (rev2)   Patchwork
• ✗ Fi.CI.BAT: failure for drm/i915/display: BMG supports UHBR13.5   Patchwork
• ✗ Fi.CI.IGT: failure for drm/i915/display: use old bpp as a base when modeset is not allowed   Patchwork
• ✗ Fi.CI.BAT: failure for drm/i915/display: BMG supports UHBR13.5 (rev2)   Patchwork
• ✗ Fi.CI.IGT: failure for Consolidation of DSS Control in Separate Files   Patchwork
• ✗ Fi.CI.IGT: failure for drm/i915/dp: Remove double assignment in intel_dp_compute_as_sdp()   Patchwork
• ✗ Fi.CI.CHECKPATCH: warning for drm/i915/display: intel_display_types.h cleanup (rev2)   Patchwork
• ✗ Fi.CI.SPARSE: warning for drm/i915/display: intel_display_types.h cleanup (rev2)   Patchwork
• ✓ Fi.CI.BAT: success for drm/i915/display: intel_display_types.h cleanup (rev2)   Patchwork
• ✓ Fi.CI.BAT: success for drm/i915/dmc: Hardcode path to MTL DMC v2.23   Patchwork
• ✗ Fi.CI.BAT: failure for drm/i915/mtl: Update PLL c20 phy value for DP uhbr20   Patchwork
• ✓ Fi.CI.IGT: success for drm/xe: Align all VRAM scanout buffers to 64k physical pages when needed. (rev2)   Patchwork
• ✗ Fi.CI.BUILD: failure for drm/i915/hwmon: expose package temperature   Patchwork
• ✓ Fi.CI.BAT: success for drm/i915/display: BMG supports UHBR13.5 (rev3)   Patchwork
• ✗ Fi.CI.IGT: failure for drm/i915/display: intel_display_types.h cleanup (rev2)   Patchwork
• ✓ Fi.CI.BAT: success for drm/i915/mtl: Update PLL c20 phy value for DP uhbr20 (rev2)   Patchwork
• ✗ Fi.CI.BAT: failure for drm/i915: nomodeset and i915.modeset cleanups   Patchwork
• ✗ Fi.CI.BUILD: warning for drm/i915/dsb: Use chained DSBs for LUT programming (rev3)   Patchwork
• ✗ Fi.CI.CHECKPATCH: warning for drm/i915/dsb: Use chained DSBs for LUT programming (rev3)   Patchwork
• ✗ Fi.CI.SPARSE: warning for drm/i915/dsb: Use chained DSBs for LUT programming (rev3)   Patchwork
• ✓ Fi.CI.BAT: success for drm/i915/dsb: Use chained DSBs for LUT programming (rev3)   Patchwork
• ✓ Fi.CI.BAT: success for drm/i915: nomodeset and i915.modeset cleanups (rev2)   Patchwork
• ✗ Fi.CI.IGT: failure for drm/i915/dmc: Hardcode path to MTL DMC v2.23   Patchwork
• ✓ Fi.CI.BAT: success for drm/i915/bios: Update new entries in VBT BDB block definitions (rev3)   Patchwork
• ✗ Fi.CI.BUILD: failure for linux-next: build failure after merge of the drm-intel tree (rev5)   Patchwork
• ✗ Fi.CI.IGT: failure for drm/i915/display: BMG supports UHBR13.5 (rev3)   Patchwork
• ✗ Fi.CI.IGT: failure for drm/i915/mtl: Update PLL c20 phy value for DP uhbr20 (rev2)   Patchwork
• ✗ Fi.CI.IGT: failure for drm/i915/dsb: Use chained DSBs for LUT programming (rev3)   Patchwork
• ✗ Fi.CI.IGT: failure for drm/i915: nomodeset and i915.modeset cleanups (rev2)   Patchwork
• ✓ Fi.CI.BAT: success for drm/i915/gem: Remove duplicate 'unlikely()' usage   Patchwork
• ✗ Fi.CI.BUILD: failure for Consolidation of DSS Control in Separate Files (rev2)   Patchwork
• ✓ Fi.CI.BAT: success for drm/i915/display: Fix BMG CCS modifiers   Patchwork
• ✗ Fi.CI.SPARSE: warning for drm/xe & drm/i915: drvdata usage changes follow-up   Patchwork
• ✓ Fi.CI.BAT: success for drm/xe & drm/i915: drvdata usage changes follow-up   Patchwork
• ✗ Fi.CI.BUILD: warning for drm/i915/fence: A couple of build fixes   Patchwork
• ✓ Fi.CI.BAT: success for drm/i915/fence: A couple of build fixes   Patchwork
• ✓ Fi.CI.IGT: success for drm/i915/bios: Update new entries in VBT BDB block definitions (rev3)   Patchwork
• ✗ Fi.CI.CHECKPATCH: warning for Miscelaneous fixes for display tracepoints   Patchwork
• ✓ Fi.CI.BAT: success for Miscelaneous fixes for display tracepoints   Patchwork
• ✗ Fi.CI.CHECKPATCH: warning for Consolidation of DSS Control in Separate Files (rev3)   Patchwork
• ✗ Fi.CI.SPARSE: warning for Consolidation of DSS Control in Separate Files (rev3)   Patchwork
• ✓ Fi.CI.BAT: success for Consolidation of DSS Control in Separate Files (rev3)   Patchwork
• ✗ Fi.CI.BUILD: failure for drm: Provide client setup helper and convert drivers (rev3)   Patchwork
• ✗ Fi.CI.CHECKPATCH: warning for fbdev: Introduce devm_register_framebuffer()   Patchwork
• ✓ Fi.CI.BAT: success for fbdev: Introduce devm_register_framebuffer()   Patchwork
• ✗ Fi.CI.CHECKPATCH: warning for drm/i915/display: hdmi and dp related struct intel_display conversions   Patchwork
• ✗ Fi.CI.SPARSE: warning for drm/i915/display: hdmi and dp related struct intel_display conversions   Patchwork
• ✓ Fi.CI.BAT: success for drm/i915/display: hdmi and dp related struct intel_display conversions   Patchwork
• ✗ Fi.CI.BAT: failure for drm/i915/display: Fix BMG CCS modifiers (rev2)   Patchwork
• ✗ Fi.CI.BAT: failure for drm/i915/display: Fix BMG CCS modifiers (rev3)   Patchwork
• ✓ Fi.CI.BAT: success for drm/i915/uc: Includ requested frequency in slow firmware load messages   Patchwork
• ✗ Fi.CI.CHECKPATCH: warning for series starting with [1/2] drm/xe: Add missing runtime reference to wedged upon gt_reset   Patchwork
• ✓ Fi.CI.BAT: success for series starting with [1/2] drm/xe: Add missing runtime reference to wedged upon gt_reset   Patchwork
• ✓ Fi.CI.IGT: success for drm/i915/gem: Remove duplicate 'unlikely()' usage   Patchwork
• ✗ Fi.CI.IGT: failure for drm/xe & drm/i915: drvdata usage changes follow-up   Patchwork
• ✓ Fi.CI.IGT: success for drm/i915/fence: A couple of build fixes   Patchwork
• ✗ Fi.CI.IGT: failure for Miscelaneous fixes for display tracepoints   Patchwork
• [PATCH] i915: change pr_info to pr_info_ratelimited   Mikulas Patocka
• [PATCH 01/86] drm/fbdev-helper: Move color-mode lookup into 4CC format helper   Laurent Pinchart
• [PATCH 04/86] drm: Add client-agnostic setup helper   Laurent Pinchart
• [PATCH 34/86] drm/renesas/rcar-du: Run DRM default client setup   Laurent Pinchart
• [PATCH 36/86] drm/renesas/shmobile: Run DRM default client setup   Laurent Pinchart
• [PATCH 48/86] drm/xlnx: Run DRM default client setup   Laurent Pinchart
• [PATCH 04/86] drm: Add client-agnostic setup helper   Laurent Pinchart
• [PATCH] drm/i915/mtl: Update PLL c20 phy value for DP uhbr20   Pottumuttu, Sai Teja
• [PATCH v1] drm/ci: increase timeout for all jobs   Vignesh Raman
• [PATCH v2 11/86] drm/atmel-hdlcd: Run DRM default client setup   Sam Ravnborg
• [PATCH v3 11/81] drm/atmel-hdlcd: Run DRM default client setup   Sam Ravnborg
• [PATCH 55/86] drm/hyperv_drm: Run DRM default client setup   Deepak Rawat
• [PULL] drm-misc-fixes   Maxime Ripard
• [PULL] drm-misc-fixes   Maxime Ripard
• [PULL] drm-misc-fixes   Maxime Ripard
• [linux-next:master] [fs] cdc4ad36a8: kernel_BUG_at_include/linux/page-flags.h   Ryan Roberts
• [PATCH] drm/xe: Name and document Wa_14019789679   Matt Roper
• [PATCH] drm/xe: Name and document Wa_14019789679   Matt Roper
• [PATCH 01/10] drm/xe/display: fix compat IS_DISPLAY_STEP() range end   Matt Roper
• [PATCH 02/10] drm/xe/display: remove intel_display_step_name() to simplify   Matt Roper
• [PATCH 03/10] drm/xe/display: remove the unused compat HAS_GMD_ID()   Matt Roper
• [PATCH 04/10] drm/xe/step: define more steppings E-J   Matt Roper
• [PATCH 05/10] drm/i915/display: rename IS_DISPLAY_IP_RANGE() to IS_DISPLAY_VER_FULL()   Matt Roper
• [PATCH 06/10] drm/i915/display: rename IS_DISPLAY_IP_STEP() to IS_DISPLAY_VER_STEP()   Matt Roper
• [PATCH 07/10] drm/i915/display: identify display steppings in display probe   Matt Roper
• [PATCH 08/10] drm/i915/display: switch to display detected steppings   Matt Roper
• [PATCH 09/10] drm/i915: remove display stepping handling   Matt Roper
• [PATCH 10/10] drm/xe: remove display stepping handling   Matt Roper
• [PATCH 09/10] drm/i915: remove display stepping handling   Matt Roper
• [PATCH v2] drm/i915/display: identify display steppings in display probe   Matt Roper
• [PATCH] drm/i915: remove unused leftover basedie step code   Matt Roper
• [PATCH] drm/i915/gt: Disable Redundant HZ Plane expansions for MTL/ARL and DG2   Matt Roper
• [v2] drm/i915/gt: Whitelist COMMON_SLICE_CHICKEN1 for UMD access.   Matt Roper
• ✗ Fi.CI.IGT: failure for drm/i915/display: correct dual pps handling for MTL_PCH+   Matt Roper
• ✗ Fi.CI.IGT: failure for drm/i915/display: correct dual pps handling for MTL_PCH+   Matt Roper
• ✓ Fi.CI.IGT: success for drm/i915/bios: Update new entries in VBT BDB block definitions (rev3)   Matt Roper
• linux-next: manual merge of the drm-misc tree with the drm-misc-fixes tree   Stephen Rothwell
• linux-next: manual merge of the drm-xe tree with the drm-misc tree   Stephen Rothwell
• linux-next: build warnings after merge of the drm-misc tree   Stephen Rothwell
• linux-next: manual merge of the drm-xe tree with the drm-intel tree   Stephen Rothwell
• linux-next: manual merge of the amdgpu tree with the drm-misc tree   Stephen Rothwell
• linux-next: manual merge of the amdgpu tree with the drm-misc tree   Stephen Rothwell
• linux-next: manual merge of the drm tree with the drm-intel-fixes tree   Stephen Rothwell
• linux-next: manual merge of the drm-misc tree with the pmdomain tree   Stephen Rothwell
• linux-next: build failure after merge of the drm-intel tree   Stephen Rothwell
• [PATCH -next] drm/i915: Use memdup_user() helper   Jinjie Ruan
• [core-for-CI PATCH] scsi: sd: Move sd_read_cpr() out of the q->limits_lock region   Saarinen, Jani
• [PATCH 2/2] drm/doc: Document that userspace should utilize CRTCs bottom up   Simon Ser
• [PATCH 1/2] drm/i915/psr: Add return bool value for hsw_activate_psr1   Shankar, Uma
• [PATCH 2/2] drm/i915/psr: Implment WA to help reach PC10   Shankar, Uma
• [PATCH] drm/i915: Fix readout degamma_lut mismatch on ilk/snb   Shankar, Uma
• [PATCH v4] drm/i915/hwmon: expose fan speed   Andy Shevchenko
• [PATCH v5] drm/i915/hwmon: expose fan speed   Andy Shevchenko
• [PATCH v5] drm/i915/hwmon: expose fan speed   Andy Shevchenko
• [PATCH v4] drm/i915/hwmon: expose fan speed   Andy Shevchenko
• [PATCH v4] drm/i915/hwmon: expose fan speed   Andy Shevchenko
• [PATCH v2 1/2] string: add mem_is_zero() helper to check if memory area is all zeros   Andy Shevchenko
• [PATCH v6] drm/i915/hwmon: expose fan speed   Andy Shevchenko
• [PATCH v6] drm/i915/hwmon: expose fan speed   Andy Shevchenko
• [PATCH v4] drm/i915/hwmon: expose fan speed   Andy Shevchenko
• [PATCH v4] drm/i915/hwmon: expose fan speed   Andy Shevchenko
• [PATCH v6] drm/i915/hwmon: expose fan speed   Andy Shevchenko
• [PATCH v1] drm/i915/hwmon: expose package temperature   Andy Shevchenko
• [PATCH v1 0/2] drm/i915/fence: A couple of build fixes   Andy Shevchenko
• [PATCH v1 1/2] drm/i915/fence: Mark debug_fence_init_onstack() with __maybe_unused   Andy Shevchenko
• [PATCH v1 2/2] drm/i915/fence: Mark debug_fence_free() with __maybe_unused   Andy Shevchenko
• [PATCH v1 0/2] drm/i915/fence: A couple of build fixes   Andy Shevchenko
• [PATCH v1 0/2] drm/i915/fence: A couple of build fixes   Andy Shevchenko
• [PATCH] drm/i915/gt: Delete sysfs entries for engines on driver unload   Andi Shyti
• [PATCH 0/2] Fix mmap memory boundary calculation   Andi Shyti
• [PATCH 1/2] drm/i915/gem: Adjust vma offset for framebuffer mmap offset   Andi Shyti
• [PATCH 2/2] drm/i915/gem: Fix Virtual Memory mapping boundaries calculation   Andi Shyti
• [PATCH 2/2] drm/i915/gem: Fix Virtual Memory mapping boundaries calculation   Andi Shyti
• [PATCH v2 0/2] Fix mmap memory boundary calculation   Andi Shyti
• [PATCH v2 1/2] drm/i915/gem: Adjust vma offset for framebuffer mmap offset   Andi Shyti
• [PATCH v2 2/2] drm/i915/gem: Fix Virtual Memory mapping boundaries calculation   Andi Shyti
• [PATCH v4] drm/i915: Add Wa_14019789679   Andi Shyti
• [PATCH v4] drm/i915: Add Wa_14019789679   Andi Shyti
• [PATCH v2 0/2] Fix mmap memory boundary calculation   Andi Shyti
• [PATCH] drm/i915/gt: Delete sysfs entries for engines on driver unload   Andi Shyti
• [PATCH v2 0/2] Fix mmap memory boundary calculation   Andi Shyti
• [PATCH 0/2] drm/i915: Fix ttm small BAR placement handling   Andi Shyti
• [PATCH] drm/i915/gt: Mark the GT as dead when mmio is unreliable   Andi Shyti
• [PATCH 0/2] Allow partial memory mapping for cpu memory   Andi Shyti
• [PATCH 1/2] drm/i915/gem: Do not look for the exact address in node   Andi Shyti
• [PATCH 2/2] drm/i915/gem: Calculate object page offset for partial memory mapping   Andi Shyti
• [PATCH] drm/i915/gem: Improve pfn calculation readability in vm_fault_gtt()   Andi Shyti
• [PATCH 0/2] Trivial double space style fix   Andi Shyti
• [PATCH 1/2] drm/i915: Replace double blank with single blank after comma in gem/ and gt/   Andi Shyti
• [PATCH 2/2] drm/i915: Replace double blank with single blank after comma   Andi Shyti
• [PATCH v3] drm/i915/hwmon: expose fan speed   Andi Shyti
• [PATCH] drm/i915/dg2: Enable Wa_14019159160 for DG2   Andi Shyti
• [PATCH] i915: change pr_info to pr_info_ratelimited   Andi Shyti
• [PATCH 1/3] drm/i915: remove a few __i915_printk() uses   Andi Shyti
• [PATCH 2/3] drm/i915: remove i915_report_error()   Andi Shyti
• [PATCH 3/3] drm/i915: remove __i915_printk()   Andi Shyti
• [PATCH v2] drm/i915: Explicitly cast divisor and use div_u64()   Andi Shyti
• [PATCH] drm/i915: Fix NULL ptr deref in intel_async_flip_check_uapi()   Andi Shyti
• [PATCH v3] drm/i915: Explicitly cast divisor and use div_u64()   Andi Shyti
• [PATCH] drm/i915/gem: Improve pfn calculation readability in vm_fault_gtt()   Andi Shyti
• [PATCH] drm/i915/guc: Fix missing enable of Wa_14019159160 on ARL   Andi Shyti
• [PATCH v4] drm/i915/hwmon: expose fan speed   Andi Shyti
• [PATCH 0/2] Allow partial memory mapping for cpu memory   Andi Shyti
• ✗ Fi.CI.IGT: failure for drm/i915/gt: Mark the GT as dead when mmio is unreliable (rev5)   Andi Shyti
• [PATCH v4] drm/i915/hwmon: expose fan speed   Andi Shyti
• [PATCH] drm/i915/gt: Mark the GT as dead when mmio is unreliable   Andi Shyti
• [PATCH 0/2] Allow partial memory mapping for cpu memory   Andi Shyti
• [PATCH v5] drm/i915/hwmon: expose fan speed   Andi Shyti
• [PATCH v2 04/10] drm/i915: use pdev_to_i915() instead of pci_get_drvdata() directly   Andi Shyti
• [PATCH v10] drm/i915: WA context support for L3flush   Andi Shyti
• [PATCH v2 0/2] Allow partial memory mapping for cpu memory   Andi Shyti
• [PATCH v2 0/2] Allow partial memory mapping for cpu memory   Andi Shyti
• [PATCH v2 1/2] drm/i915/gem: Do not look for the exact address in node   Andi Shyti
• [PATCH v2 2/2] drm/i915/gem: Calculate object page offset for partial memory mapping   Andi Shyti
• [PATCH v2 0/2] Allow partial memory mapping for cpu memory   Andi Shyti
• [PATCH v2 1/2] drm/i915/gem: Do not look for the exact address in node   Andi Shyti
• [PATCH v2 2/2] drm/i915/gem: Calculate object page offset for partial memory mapping   Andi Shyti
• [PATCH v2 0/2] Allow partial memory mapping for cpu memory   Andi Shyti
• [PATCH] drm/i915/gem: Remove unnecessary cast   Andi Shyti
• [PATCH] drm/i915/gem: Remove unnecessary cast   Andi Shyti
• [PATCH] drm/i915/gt: remove stray declaration of intel_gt_release_all()   Andi Shyti
• [PATCH] drm/i915/gt: remove stray declaration of intel_gt_release_all()   Andi Shyti
• [RFC PATCH v2 00/11] CCS static load balance   Andi Shyti
• [RFC PATCH v2 01/11] drm/i915/gt: Move the CCS mode variable to a global position   Andi Shyti
• [RFC PATCH v2 02/11] drm/i915/gt: Allow the creation of multi-mode CCS masks   Andi Shyti
• [RFC PATCH v2 03/11] drm/i915/gt: Refactor uabi engine class/instance list creation   Andi Shyti
• [RFC PATCH v2 04/11] drm/i915/gt: Manage CCS engine creation within UABI exposure   Andi Shyti
• [RFC PATCH v2 05/11] drm/i915/gt: Remove cslices mask value from the CCS structure   Andi Shyti
• [RFC PATCH v2 06/11] drm/i915/gt: Expose the number of total CCS slices   Andi Shyti
• [RFC PATCH v2 07/11] drm/i915/gt: Store engine-related sysfs kobjects   Andi Shyti
• [RFC PATCH v2 08/11] drm/i915/gt: Store active CCS mask   Andi Shyti
• [RFC PATCH v2 09/11] drm/i915/gt: Isolate single sysfs engine file creation   Andi Shyti
• [RFC PATCH v2 10/11] drm/i915/gt: Implement creation and removal routines for CCS engines   Andi Shyti
• [RFC PATCH v2 11/11] drm/i915/gt: Allow the user to change the CCS mode through sysfs   Andi Shyti
• [PATCH] drm/i915/gt: Continue creating engine sysfs files even after a failure   Andi Shyti
• [PATCH v2 0/2] Allow partial memory mapping for cpu memory   Andi Shyti
• [PATCH v4] drm/i915/hwmon: expose fan speed   Andi Shyti
• [PATCH 0/2] Allow partial memory mapping for cpu memory   Andi Shyti
• [PATCH v1] drivers:gt:Switch to use kmemdup_array()   Andi Shyti
• [PATCH v2] drm/i915/gt: Use kmemdup_array instead of kmemdup for multiple allocation   Andi Shyti
• [PATCH v2] drm/i915/gt: Use kmemdup_array instead of kmemdup for multiple allocation   Andi Shyti
• [PATCH] drm/i915/gt: Continue creating engine sysfs files even after a failure   Andi Shyti
• [PATCH] drm/i915/gt: Continue creating engine sysfs files even after a failure   Andi Shyti
• [PATCH v1 00/14] CCS static load balance   Andi Shyti
• [PATCH v1 01/14] drm/i915/gt: Avoid using masked workaround for CCS_MODE setting   Andi Shyti
• [PATCH v1 02/14] drm/i915/gt: Move the CCS mode variable to a global position   Andi Shyti
• [PATCH v1 03/14] drm/i915/gt: Allow the creation of multi-mode CCS masks   Andi Shyti
• [PATCH v1 04/14] drm/i915/gt: Refactor uabi engine class/instance list creation   Andi Shyti
• [PATCH v1 05/14] drm/i915/gem: Mark and verify UABI engine validity   Andi Shyti
• [PATCH v1 06/14] drm/i915/gt: Introduce for_each_enabled_engine() and apply it in selftests   Andi Shyti
• [PATCH v1 07/14] drm/i915/gt: Manage CCS engine creation within UABI exposure   Andi Shyti
• [PATCH v1 08/14] drm/i915/gt: Remove cslices mask value from the CCS structure   Andi Shyti
• [PATCH v1 09/14] drm/i915/gt: Expose the number of total CCS slices   Andi Shyti
• [PATCH v1 10/14] drm/i915/gt: Store engine-related sysfs kobjects   Andi Shyti
• [PATCH v1 11/14] drm/i915/gt: Store active CCS mask   Andi Shyti
• [PATCH v1 12/14] drm/i915/gt: Isolate single sysfs engine file creation   Andi Shyti
• [PATCH v1 13/14] drm/i915/gt: Implement creation and removal routines for CCS engines   Andi Shyti
• [PATCH v1 14/14] drm/i915/gt: Allow the user to change the CCS mode through sysfs   Andi Shyti
• [CI] drm/i915/gt: Use kmemdup_array instead of kmemdup for multiple allocation   Andi Shyti
• [PATCH v6] drm/i915/hwmon: expose fan speed   Andi Shyti
• [PATCH v5] drm/i915/hwmon: expose fan speed   Andi Shyti
• [PATCH v2 00/15] CCS static load balance   Andi Shyti
• [PATCH v2 01/15] drm/i915/gt: Avoid using masked workaround for CCS_MODE setting   Andi Shyti
• [PATCH v2 02/15] drm/i915/gt: Move the CCS mode variable to a global position   Andi Shyti
• [PATCH v2 03/15] drm/i915/gt: Allow the creation of multi-mode CCS masks   Andi Shyti
• [PATCH v2 04/15] drm/i915/gt: Refactor uabi engine class/instance list creation   Andi Shyti
• [PATCH v2 05/15] drm/i915/gem: Mark and verify UABI engine validity   Andi Shyti
• [PATCH v2 06/15] drm/i915/gt: Introduce for_each_enabled_engine() and apply it in selftests   Andi Shyti
• [PATCH v2 07/15] drm/i915/gt: Manage CCS engine creation within UABI exposure   Andi Shyti
• [PATCH v2 08/15] drm/i915/gt: Remove cslices mask value from the CCS structure   Andi Shyti
• [PATCH v2 09/15] drm/i915/gt: Expose the number of total CCS slices   Andi Shyti
• [PATCH v2 10/15] drm/i915/gt: Store engine-related sysfs kobjects   Andi Shyti
• [PATCH v2 11/15] drm/i915/gt: Store active CCS mask   Andi Shyti
• [PATCH v2 12/15] drm/i915: Protect access to the UABI engines list with a mutex   Andi Shyti
• [PATCH v2 13/15] drm/i915/gt: Isolate single sysfs engine file creation   Andi Shyti
• [PATCH v2 14/15] drm/i915/gt: Implement creation and removal routines for CCS engines   Andi Shyti
• [PATCH v2 15/15] drm/i915/gt: Allow the user to change the CCS mode through sysfs   Andi Shyti
• [PATCH v3 00/15] CCS static load balance   Andi Shyti
• [PATCH v3 00/15] CCS static load balance   Andi Shyti
• [PATCH v3 01/15] drm/i915/gt: Avoid using masked workaround for CCS_MODE setting   Andi Shyti
• [PATCH v3 02/15] drm/i915/gt: Move the CCS mode variable to a global position   Andi Shyti
• [PATCH v3 03/15] drm/i915/gt: Allow the creation of multi-mode CCS masks   Andi Shyti
• [PATCH v3 04/15] drm/i915/gt: Refactor uabi engine class/instance list creation   Andi Shyti
• [PATCH v3 05/15] drm/i915/gem: Mark and verify UABI engine validity   Andi Shyti
• [PATCH v3 06/15] drm/i915/gt: Introduce for_each_enabled_engine() and apply it in selftests   Andi Shyti
• [PATCH v3 07/15] drm/i915/gt: Manage CCS engine creation within UABI exposure   Andi Shyti
• [PATCH v3 08/15] drm/i915/gt: Remove cslices mask value from the CCS structure   Andi Shyti
• [PATCH v3 09/15] drm/i915/gt: Expose the number of total CCS slices   Andi Shyti
• [PATCH v3 10/15] drm/i915/gt: Store engine-related sysfs kobjects   Andi Shyti
• [PATCH v3 11/15] drm/i915/gt: Store active CCS mask   Andi Shyti
• [PATCH v3 12/15] drm/i915: Protect access to the UABI engines list with a mutex   Andi Shyti
• [PATCH v3 13/15] drm/i915/gt: Isolate single sysfs engine file creation   Andi Shyti
• [PATCH v3 14/15] drm/i915/gt: Implement creation and removal routines for CCS engines   Andi Shyti
• [PATCH v3 15/15] drm/i915/gt: Allow the user to change the CCS mode through sysfs   Andi Shyti
• [PATCH] drm/i915/gt: Continue creating engine sysfs files even after a failure   Andi Shyti
• [PATCH v3] drm/i915/gt: Use kmemdup_array instead of kmemdup for multiple allocation   Andi Shyti
• [PATCH] drm: Fix kerneldoc for "Returns" section   Andi Shyti
• [PATCH v3 00/15] CCS static load balance   Andi Shyti
• [PATCH v3 00/15] CCS static load balance   Andi Shyti
• [PATCH v3 00/15] CCS static load balance   Andi Shyti
• [PATCH 01/10] drm/xe: use pdev_to_xe_device() instead of pci_get_drvdata() directly   Gustavo Sousa
• [PATCH 02/10] drm/xe: add kdev_to_xe_device() helper and use it   Gustavo Sousa
• [PATCH 03/10] drm/xe/tests: fix drvdata usage   Gustavo Sousa
• [PATCH 04/10] drm/i915: use pdev_to_i915() instead of pci_get_drvdata() directly   Gustavo Sousa
• [PATCH 04/10] drm/i915: use pdev_to_i915() instead of pci_get_drvdata() directly   Gustavo Sousa
• [PATCH 05/10] drm/i915 & drm/xe: save struct drm_device to drvdata   Gustavo Sousa
• [PATCH 06/10] drm/i915: support struct device and pci_dev in to_intel_display()   Gustavo Sousa
• [PATCH 07/10] drm/i915/audio: migrate away from kdev_to_i915()   Gustavo Sousa
• [PATCH 08/10] drm/i915/hdcp: migrate away from kdev_to_i915() in bind/unbind   Gustavo Sousa
• [PATCH 09/10] drm/i915/hdcp: migrate away from kdev_to_i915() in GSC messaging   Gustavo Sousa
• [PATCH 10/10] drm/xe/display: remove unused compat kdev_to_i915() and pdev_to_i915()   Gustavo Sousa
• [PATCH 05/10] drm/i915 & drm/xe: save struct drm_device to drvdata   Gustavo Sousa
• [PATCH 09/10] drm/i915/hdcp: migrate away from kdev_to_i915() in GSC messaging   Gustavo Sousa
• [PATCH v2 01/10] drm/xe/tests: remove unused leftover xe_call_for_each_device()   Gustavo Sousa
• [PATCH v2 04/10] drm/i915: use pdev_to_i915() instead of pci_get_drvdata() directly   Gustavo Sousa
• [PATCH v2 06/10] drm/i915: support struct device and pci_dev in to_intel_display()   Gustavo Sousa
• [PATCH v2 09/10] drm/i915/hdcp: migrate away from kdev_to_i915() in GSC messaging   Gustavo Sousa
• [PATCH v2] drm/i915/display: identify display steppings in display probe   Gustavo Sousa
• [PATCH] drm/i915/dmc: Hardcode path to MTL DMC v2.23   Gustavo Sousa
• [PATCH 0/4] Miscelaneous fixes for display tracepoints   Gustavo Sousa
• [PATCH 1/4] drm/i915/display: Fix out-of-bounds access in pipe-related tracepoints   Gustavo Sousa
• [PATCH 2/4] drm/i915/display: Store pipe name in trace events   Gustavo Sousa
• [PATCH 3/4] drm/i915/display: Do not use ids from enum pipe in TP_printk()   Gustavo Sousa
• [PATCH 4/4] drm/i915/display: Cover all possible pipes in TP_printk()   Gustavo Sousa
• PR for new i915 and Xe binaries   Daniele Ceraolo Spurio
• [PATCH] drm/i915: ARL requires a newer GSC firmware   Daniele Ceraolo Spurio
• [PATCH] drm/i915: Do not attempt to load the GSC multiple times   Daniele Ceraolo Spurio
• [PATCH] drm/i915: Do not attempt to load the GSC multiple times   Daniele Ceraolo Spurio
• [PATCH v2 47/86] drm/vc4: Run DRM default client setup   Dave Stevenson
• [PATCH v9 0/6] drm/ci: Add support for GPU and display testing   Daniel Stone
• [PATCH v2 13/86] drm/hisilicon/kirin: Run DRM default client setup   John Stultz
• [PATCH 38/86] drm/rockchip: Run DRM default client setup   Heiko Stübner
• [PATCH 05/12] drm/i915: Add some essential functionality for joiners   Ville Syrjälä
• [PATCH 11/14] drm/i915/dsb: Allow intel_dsb_chain() to use DSB_WAIT_FOR_VBLANK   Ville Syrjälä
• [PATCH 10/14] drm/i915/dsb: Introduce intel_dsb_chain()   Ville Syrjälä
• [PATCH v2 0/9] drm/i915/display: platform identification with display->is.<PLATFORM>   Ville Syrjälä
• [PATCH 02/19] drm/i915/dss_regs: Use REG_* macros for the DSS ctl bits   Ville Syrjälä
• [PATCH 07/19] drm/i915/icl_dsi: Move helpers to configure dsi dual link to intel_dss   Ville Syrjälä
• [PATCH v2] drm/i915/hwmon: expose fan speed   Riana Tauro
• [PATCH 28/86] drm/mi0283qt: Run DRM default client setup   Noralf Trønnes
• [PATCH 28/86] drm/mi0283qt: Run DRM default client setup   Noralf Trønnes
• [PATCH 32/86] drm/panel-mipi-dbi: Run DRM default client setup   Noralf Trønnes
• [PATCH 37/86] drm/repaper: Run DRM default client setup   Noralf Trønnes
• [PATCH 54/86] drm/gud: Run DRM default client setup   Noralf Trønnes
• [PATCH 1/3] drm/i915: remove a few __i915_printk() uses   Tvrtko Ursulin
• [PATCH 2/3] drm/i915: remove i915_report_error()   Tvrtko Ursulin
• [PATCH 3/3] drm/i915: remove __i915_printk()   Tvrtko Ursulin
• Too large alloc in gem_exec_reloc test? (was Re: [linus:master] [mm/slab] 2e8000b826: WARNING:at_mm/util.c:#__kvmalloc_node_noprof)   Tvrtko Ursulin
• [PATCH 3/3] drm/i915: remove __i915_printk()   Tvrtko Ursulin
• [PULL] drm-intel-fixes   Tvrtko Ursulin
• [PATCH v3 40/81] drm/stm: Run DRM default client setup   Geert Uytterhoeven
• [PATCH v3 36/81] drm/renesas/shmobile: Run DRM default client setup   Geert Uytterhoeven
• [PATCH v3 04/81] drm: Add client-agnostic setup helper   Geert Uytterhoeven
• [PATCH 9/9] drm/tilcdc: Use backlight power constants   Tomi Valkeinen
• [PULL] drm-misc-next   Daniel Vetter
• [PATCH 0/2] Allow partial memory mapping for cpu memory   Daniel Vetter
• [PATCH 0/2] Allow partial memory mapping for cpu memory   Daniel Vetter
• [PATCH 0/2] Allow partial memory mapping for cpu memory   Daniel Vetter
• [PATCH 0/2] Allow partial memory mapping for cpu memory   Daniel Vetter
• [RFC PATCH] dma-buf/dma-fence: Use a successful read_trylock() annotation for dma_fence_begin_signalling()   Daniel Vetter
• [PATCH 0/2] Allow partial memory mapping for cpu memory   Daniel Vetter
• [PULL] drm-misc-next   Daniel Vetter
• [PATCH 0/2] Allow partial memory mapping for cpu memory   Daniel Vetter
• [PATCH v2 0/2] Allow partial memory mapping for cpu memory   Daniel Vetter
• [PULL] drm-misc-next   Daniel Vetter
• [PULL] drm-xe-next   Daniel Vetter
• [PULL] drm-intel-gt-next   Daniel Vetter
• [PATCH] drm/i915/gt: Continue creating engine sysfs files even after a failure   Daniel Vetter
• [PATCH v3 00/15] CCS static load balance   Daniel Vetter
• [PATCH v3 15/15] drm/i915/gt: Allow the user to change the CCS mode through sysfs   Daniel Vetter
• [PATCH 0/2] drm/i915: nomodeset and i915.modeset cleanups   Daniel Vetter
• [RESEND 1/3] drm/mst: switch to guid_t type for GUID   Daniel Vetter
• [RESEND 2/3] drm/mst: switch to guid_gen() to generate valid GUIDs   Daniel Vetter
• [RESEND 3/3] drm/amd/display: switch to guid_gen() to generate valid GUIDs   Daniel Vetter
• [PATCH v3 00/15] CCS static load balance   Daniel Vetter
• [PATCH 1/2] drm/i915/gem: Adjust vma offset for framebuffer mmap offset   Rodrigo Vivi
• [PULL] drm-xe-fixes   Rodrigo Vivi
• [PULL] drm-intel-next   Rodrigo Vivi
• [PULL] drm-xe-fixes   Rodrigo Vivi
• [PATCH] drm/i915/gem: Remove unnecessary cast   Rodrigo Vivi
• [PATCH 1/7] drm/i915/display: support struct intel_atomic_state in to_intel_display()   Rodrigo Vivi
• [PATCH 2/7] drm/i915/display: convert intel_link_bw.c to struct intel_display   Rodrigo Vivi
• [PATCH 3/7] drm/i915/display: convert intel_load_detect.c to struct intel_display   Rodrigo Vivi
• [PATCH 3/7] drm/i915/display: convert intel_load_detect.c to struct intel_display   Rodrigo Vivi
• [PATCH 3/7] drm/i915/display: convert intel_load_detect.c to struct intel_display   Rodrigo Vivi
• [PATCH 4/7] drm/i915/alpm: convert to struct intel_display   Rodrigo Vivi
• [PATCH 5/7] drm/i915/lspcon: convert to struct intel_display   Rodrigo Vivi
• [PATCH 6/7] drm/i915/display: convert dp aux backlight to struct intel_display   Rodrigo Vivi
• [PATCH 7/7] drm/i915/hti: convert to struct intel_display   Rodrigo Vivi
• [PATCH] drm/i915/gt: Continue creating engine sysfs files even after a failure   Rodrigo Vivi
• [PATCH v4] drm/i915/hwmon: expose fan speed   Rodrigo Vivi
• [PULL] drm-xe-fixes   Rodrigo Vivi
• [PATCH] drm/i915: ARL requires a newer GSC firmware   Rodrigo Vivi
• [PATCH 1/7] drm/i915/vblank: use drm_crtc_vblank_crtc() instead of open-coding   Rodrigo Vivi
• [PATCH 2/7] drm/i915/vblank: fix context imbalance warnings   Rodrigo Vivi
• [PATCH 3/7] drm/i915/vblank: convert to struct intel_display   Rodrigo Vivi
• [PATCH 4/7] drm/i915/vrr: convert to struct intel_display   Rodrigo Vivi
• [PATCH 5/7] drm/i915/tv: convert to struct intel_display   Rodrigo Vivi
• [PATCH 6/7] drm/i915/sprite: convert to struct intel_display   Rodrigo Vivi
• [PATCH 7/7] drm/i915/display: convert params to struct intel_display   Rodrigo Vivi
• [PATCH] drm/i915/gem: Remove unnecessary cast   Rodrigo Vivi
• [PATCH] drm/i915/gt: Continue creating engine sysfs files even after a failure   Rodrigo Vivi
• [PATCH] drm/i915: remove unnecessary display includes   Rodrigo Vivi
• [PATCH] drm/i915/dsi: Make Lenovo Yoga Tab 3 X90F DMI match less strict   Rodrigo Vivi
• [PATCH v5 2/2] drm/i915/display: Add function for checking 64k physical alignment workaround   Rodrigo Vivi
• [PATCH v6 2/2] drm/xe: Align all VRAM scanout buffers to 64k physical pages when needed.   Rodrigo Vivi
• [PATCH v6 1/2] drm/i915/display: Plane capability for 64k phys alignment   Rodrigo Vivi
• [PATCH v6 1/2] drm/i915/display: Plane capability for 64k phys alignment   Rodrigo Vivi
• [PATCH] drm/i915/gt: Continue creating engine sysfs files even after a failure   Rodrigo Vivi
• [PATCH v2 0/9] drm/i915/display: platform identification with display->is.<PLATFORM>   Rodrigo Vivi
• [PATCH v2 4/9] drm/i915/display: add display platforms structure with platform members   Rodrigo Vivi
• [PATCH v2 5/9] drm/i915/display: add platforms "is" member to struct intel_display   Rodrigo Vivi
• [PATCH v3] drm/i915/display: add platforms "is" member to struct intel_display   Rodrigo Vivi
• [PATCH v2 6/9] drm/i915/display: remove the display platform enum as unnecessary   Rodrigo Vivi
• [PATCH v2 7/9] drm/i915/display: consider HSW/BDW ULX to also be ULT   Rodrigo Vivi
• [PATCH v2 8/9] drm/i915/display: keep subplatforms next to their platforms   Rodrigo Vivi
• [PATCH v2 9/9] drm/i915/bios: use display->is.PLATFORM instead of IS_PLATFORM()   Rodrigo Vivi
• [PULL] drm-xe-fixes   Rodrigo Vivi
• [PULL] drm-intel-next   Rodrigo Vivi
• [PATCH] drm/i915/display: Fix BMG CCS modifiers   Rodrigo Vivi
• [PATCH 1/2] drm/xe: Add missing runtime reference to wedged upon gt_reset   Rodrigo Vivi
• [PATCH 2/2] drm/xe/display: Avoid encoder_suspend at runtime suspend   Rodrigo Vivi
• [PATCH v2] drm/i915/display: Fix BMG CCS modifiers   Rodrigo Vivi
• [PATCH 46/86] drm/tve200: Run DRM default client setup   Linus Walleij
• [PATCH 25/86] drm/mcde: Run DRM default client setup   Linus Walleij
• [PATCH 3/9] drm/panel: panel-novatak-nt35510: Use backlight power constants   Linus Walleij
• [RESEND 1/2] drm/i915/gvt: stop using drm_edid_block_valid()   Zhenyu Wang
• [PATCH] fbdev: Introduce devm_register_framebuffer()   Thomas Weißschuh
• [PATCH] fbdev: Introduce devm_register_framebuffer()   Thomas Weißschuh
• [RESEND 3/3] drm/amd/display: switch to guid_gen() to generate valid GUIDs   Harry Wentland
• [linux-next:master] [fs] cdc4ad36a8: kernel_BUG_at_include/linux/page-flags.h   Matthew Wilcox
• [PATCH v6 0/4] drm: Use full allocated minor range for DRM   Michał Winiarski
• [PATCH v7 0/3] drm: Use full allocated minor range for DRM   Michał Winiarski
• [PATCH v7 1/3] drm: Use XArray instead of IDR for minors   Michał Winiarski
• [PATCH v7 2/3] accel: Use XArray instead of IDR for minors   Michał Winiarski
• [PATCH v7 3/3] drm: Expand max DRM device number to full MINORBITS   Michał Winiarski
• Lower the speed of I2C for DDC/CI   Maciej Wójcik
• [PATCH] drm/i915/guc: prevent a possible int overflow in wq offsets   Nikita Zhandarovich
• [PATCH 3/9] drm/panel: panel-novatak-nt35510: Use backlight power constants   Jessica Zhang
• [PATCH 4/9] drm/panel: panel-orisetech-otm8009a: Use backlight power constants   Jessica Zhang
• [PATCH 5/9] drm/panel: panel-samsung-s6e63j0x03: Use backlight power constants   Jessica Zhang
• [PATCH 6/9] drm/panel: panel-samsung-s6e3ha2: Use backlight power constants   Jessica Zhang
• [PATCH 7/9] drm/panel: panel-sony-acx565akm: Use backlight power constants   Jessica Zhang
• [PATCH v3 31/81] drm/panel/ili9341: Run DRM default client setup   Jessica Zhang
• [PATCH v6 0/4] drm: Use full allocated minor range for DRM   James Zhu
• [PATCH v6 0/4] drm: Use full allocated minor range for DRM   James Zhu
• [PULL] drm-misc-next   Thomas Zimmermann
• [PATCH 1/9] drm/amdgpu: Use backlight power constants   Thomas Zimmermann
• [PATCH 1/9] drm/amdgpu: Use backlight power constants   Thomas Zimmermann
• [PULL] drm-misc-next   Thomas Zimmermann
• [PATCH] video/aperture: match the pci device when calling sysfb_disable()   Thomas Zimmermann
• [PATCH 9/9] drm/tilcdc: Use backlight power constants   Thomas Zimmermann
• [PATCH 9/9] drm/tilcdc: Use backlight power constants   Thomas Zimmermann
• [PULL] drm-misc-fixes   Thomas Zimmermann
• [PULL] drm-misc-next   Thomas Zimmermann
• [PATCH 00/86] drm: Provide client setup helper and convert drivers   Thomas Zimmermann
• [PATCH 01/86] drm/fbdev-helper: Move color-mode lookup into 4CC format helper   Thomas Zimmermann
• [PATCH 02/86] drm/fbdev-helper: Set and clear VGA switcheroo client from fb_info   Thomas Zimmermann
• [PATCH 03/86] drm/fbdev: Add memory-agnostic fbdev client   Thomas Zimmermann
• [PATCH 04/86] drm: Add client-agnostic setup helper   Thomas Zimmermann
• [PATCH 05/86] drm/fbdev-dma: Support struct drm_driver.fbdev_probe   Thomas Zimmermann
• [PATCH 06/86] drm/arcgpu: Run DRM default client setup   Thomas Zimmermann
• [PATCH 07/86] drm/arm/komeda: Run DRM default client setup   Thomas Zimmermann
• [PATCH 08/86] drm/arm/hdlcd: Run DRM default client setup   Thomas Zimmermann
• [PATCH 09/86] drm/arm/malidp: Run DRM default client setup   Thomas Zimmermann
• [PATCH 10/86] drm/aspeed: Run DRM default client setup   Thomas Zimmermann
• [PATCH 11/86] drm/atmel-hdlcd: Run DRM default client setup   Thomas Zimmermann
• [PATCH 12/86] drm/fsl-dcu: Run DRM default client setup   Thomas Zimmermann
• [PATCH 13/86] drm/hisilicon/kirin: Run DRM default client setup   Thomas Zimmermann
• [PATCH 14/86] drm/hx8357d: Run DRM default client setup   Thomas Zimmermann
• [PATCH 15/86] drm/ili9163: Run DRM default client setup   Thomas Zimmermann
• [PATCH 16/86] drm/ili9225: Run DRM default client setup   Thomas Zimmermann
• [PATCH 17/86] drm/ili9341: Run DRM default client setup   Thomas Zimmermann
• [PATCH 18/86] drm/ili9486: Run DRM default client setup   Thomas Zimmermann
• [PATCH 19/86] drm/imx/dcss: Run DRM default client setup   Thomas Zimmermann
• [PATCH 20/86] drm/imx/ipuv3: Run DRM default client setup   Thomas Zimmermann
• [PATCH 21/86] drm/imx/lcdc: Run DRM default client setup   Thomas Zimmermann
• [PATCH 22/86] drm/ingenic: Run DRM default client setup   Thomas Zimmermann
• [PATCH 23/86] drm/kmb: Run DRM default client setup   Thomas Zimmermann
• [PATCH 24/86] drm/logicvc: Run DRM default client setup   Thomas Zimmermann
• [PATCH 25/86] drm/mcde: Run DRM default client setup   Thomas Zimmermann
• [PATCH 26/86] drm/mediatek: Run DRM default client setup   Thomas Zimmermann
• [PATCH 27/86] drm/meson: Run DRM default client setup   Thomas Zimmermann
• [PATCH 28/86] drm/mi0283qt: Run DRM default client setup   Thomas Zimmermann
• [PATCH 29/86] drm/mxsfb/lcdif: Run DRM default client setup   Thomas Zimmermann
• [PATCH 30/86] drm/msxfb: Run DRM default client setup   Thomas Zimmermann
• [PATCH 31/86] drm/panel/ili9341: Run DRM default client setup   Thomas Zimmermann
• [PATCH 32/86] drm/panel-mipi-dbi: Run DRM default client setup   Thomas Zimmermann
• [PATCH 33/86] drm/pl111: Run DRM default client setup   Thomas Zimmermann
• [PATCH 34/86] drm/renesas/rcar-du: Run DRM default client setup   Thomas Zimmermann
• [PATCH 35/86] drm/renesas/rz-du: Run DRM default client setup   Thomas Zimmermann
• [PATCH 36/86] drm/renesas/shmobile: Run DRM default client setup   Thomas Zimmermann
• [PATCH 37/86] drm/repaper: Run DRM default client setup   Thomas Zimmermann
• [PATCH 38/86] drm/rockchip: Run DRM default client setup   Thomas Zimmermann
• [PATCH 39/86] drm/sti: Run DRM default client setup   Thomas Zimmermann
• [PATCH 40/86] drm/stm: Run DRM default client setup   Thomas Zimmermann
• [PATCH 41/86] drm/sun4i: Run DRM default client setup   Thomas Zimmermann
• [PATCH 42/86] drm/tidss: Run DRM default client setup   Thomas Zimmermann
• [PATCH 43/86] drm/tilcdc: Run DRM default client setup   Thomas Zimmermann
• [PATCH 44/86] drm/st7586: Run DRM default client setup   Thomas Zimmermann
• [PATCH 45/86] drm/st7735r: Run DRM default client setup   Thomas Zimmermann
• [PATCH 46/86] drm/tve200: Run DRM default client setup   Thomas Zimmermann
• [PATCH 47/86] drm/vc4: Run DRM default client setup   Thomas Zimmermann
• [PATCH 48/86] drm/xlnx: Run DRM default client setup   Thomas Zimmermann
• [PATCH 49/86] drm/fbdev-dma: Remove obsolete setup function   Thomas Zimmermann
• [PATCH 50/86] drm/fbdev-shmem: Support struct drm_driver.fbdev_probe   Thomas Zimmermann
• [PATCH 51/86] drm/ast: Run DRM default client setup   Thomas Zimmermann
• [PATCH 52/86] drm/cirrus: Run DRM default client setup   Thomas Zimmermann
• [PATCH 53/86] drm/gm12u320: Run DRM default client setup   Thomas Zimmermann
• [PATCH 54/86] drm/gud: Run DRM default client setup   Thomas Zimmermann
• [PATCH 55/86] drm/hyperv_drm: Run DRM default client setup   Thomas Zimmermann
• [PATCH 56/86] drm/mgag200: Run DRM default client setup   Thomas Zimmermann
• [PATCH 57/86] drm/ofdrm: Use DRM default client setup   Thomas Zimmermann
• [PATCH 58/86] drm/simpledrm: Run DRM default client setup   Thomas Zimmermann
• [PATCH 59/86] drm/solomon: Run DRM default client setup   Thomas Zimmermann
• [PATCH 60/86] drm/udl: Run DRM default client setup   Thomas Zimmermann
• [PATCH 61/86] drm/virtgpu: Run DRM default client setup   Thomas Zimmermann
• [PATCH 62/86] drm/vkms: Run DRM default client setup   Thomas Zimmermann
• [PATCH 63/86] drm/fbdev-shmem: Remove obsolete setup function   Thomas Zimmermann
• [PATCH 64/86] drm/fbdev-ttm: Support struct drm_driver.fbdev_probe   Thomas Zimmermann
• [PATCH 65/86] drm/amdgpu: Run DRM default client setup   Thomas Zimmermann
• [PATCH 66/86] drm/bochs: Run DRM default client setup   Thomas Zimmermann
• [PATCH 67/86] drm/hisilicon/hibmc: Run DRM default client setup   Thomas Zimmermann
• [PATCH 68/86] drm/loongson: Run DRM default client setup   Thomas Zimmermann
• [PATCH 69/86] drm/nouveau: Run DRM default client setup   Thomas Zimmermann
• [PATCH 70/86] drm/qxl: Run DRM default client setup   Thomas Zimmermann
• [PATCH 71/86] drm/vboxvideo: Run DRM default client setup   Thomas Zimmermann
• [PATCH 72/86] drm/vmwgfx: Run DRM default client setup   Thomas Zimmermann
• [PATCH 73/86] drm/fbdev-ttm: Remove obsolete setup function   Thomas Zimmermann
• [PATCH 74/86] drm/armada: Run DRM default client setup   Thomas Zimmermann
• [PATCH 75/86] drm/exynos-drm: Run DRM default client setup   Thomas Zimmermann
• [PATCH 76/86] drm/gma500: Run DRM default client setup   Thomas Zimmermann
• [PATCH 77/86] drm/msm: Run DRM default client setup   Thomas Zimmermann
• [PATCH 78/86] drm/radeon: Run DRM default client setup   Thomas Zimmermann
• [PATCH 79/86] drm/tegra: Run DRM default client setup   Thomas Zimmermann
• [PATCH 80/86] drm/i915: Remove struct drm_fb_helper from struct intel_fbdev   Thomas Zimmermann
• [PATCH 81/86] drm/i915: Move custom restore code into separate callback   Thomas Zimmermann
• [PATCH 82/86] drm/i915: Move custom hotplug code into separate callback   Thomas Zimmermann
• [PATCH 83/86] drm/{i915,xe}: Run DRM default client setup   Thomas Zimmermann
• [PATCH 84/86] drm/omapdrm: Remove struct drm_fb_helper from struct omap_fbdev.   Thomas Zimmermann
• [PATCH 85/86] drm/omapdrm: Run DRM default client setup   Thomas Zimmermann
• [PATCH 86/86] drm/fb-helper: Remove struct drm_fb_helper.fb_probe   Thomas Zimmermann
• [PATCH 83/86] drm/{i915,xe}: Run DRM default client setup   Thomas Zimmermann
• [PATCH] video/aperture: match the pci device when calling sysfb_disable()   Thomas Zimmermann
• [PATCH] video/aperture: match the pci device when calling sysfb_disable()   Thomas Zimmermann
• [PATCH 04/86] drm: Add client-agnostic setup helper   Thomas Zimmermann
• [PATCH 28/86] drm/mi0283qt: Run DRM default client setup   Thomas Zimmermann
• [PATCH 31/86] drm/panel/ili9341: Run DRM default client setup   Thomas Zimmermann
• [82/86] drm/i915: Move custom hotplug code into separate callback   Thomas Zimmermann
• [PATCH 48/86] drm/xlnx: Run DRM default client setup   Thomas Zimmermann
• [PATCH 04/86] drm: Add client-agnostic setup helper   Thomas Zimmermann
• [82/86] drm/i915: Move custom hotplug code into separate callback   Thomas Zimmermann
• [PATCH v2 00/86] drm: Provide client setup helper and convert drivers   Thomas Zimmermann
• [PATCH v2 01/86] drm/fbdev-helper: Move color-mode lookup into 4CC format helper   Thomas Zimmermann
• [PATCH v2 02/86] drm/fbdev-helper: Set and clear VGA switcheroo client from fb_info   Thomas Zimmermann
• [PATCH v2 03/86] drm/fbdev: Add memory-agnostic fbdev client   Thomas Zimmermann
• [PATCH v2 04/86] drm: Add client-agnostic setup helper   Thomas Zimmermann
• [PATCH v2 05/86] drm/fbdev-dma: Support struct drm_driver.fbdev_probe   Thomas Zimmermann
• [PATCH v2 06/86] drm/arcgpu: Run DRM default client setup   Thomas Zimmermann
• [PATCH v2 07/86] drm/arm/komeda: Run DRM default client setup   Thomas Zimmermann
• [PATCH v2 08/86] drm/arm/hdlcd: Run DRM default client setup   Thomas Zimmermann
• [PATCH v2 09/86] drm/arm/malidp: Run DRM default client setup   Thomas Zimmermann
• [PATCH v2 10/86] drm/aspeed: Run DRM default client setup   Thomas Zimmermann
• [PATCH v2 11/86] drm/atmel-hdlcd: Run DRM default client setup   Thomas Zimmermann
• [PATCH v2 12/86] drm/fsl-dcu: Run DRM default client setup   Thomas Zimmermann
• [PATCH v2 13/86] drm/hisilicon/kirin: Run DRM default client setup   Thomas Zimmermann
• [PATCH v2 14/86] drm/hx8357d: Run DRM default client setup   Thomas Zimmermann
• [PATCH v2 15/86] drm/ili9163: Run DRM default client setup   Thomas Zimmermann
• [PATCH v2 16/86] drm/ili9225: Run DRM default client setup   Thomas Zimmermann
• [PATCH v2 17/86] drm/ili9341: Run DRM default client setup   Thomas Zimmermann
• [PATCH v2 18/86] drm/ili9486: Run DRM default client setup   Thomas Zimmermann
• [PATCH v2 19/86] drm/imx/dcss: Run DRM default client setup   Thomas Zimmermann
• [PATCH v2 20/86] drm/imx/ipuv3: Run DRM default client setup   Thomas Zimmermann
• [PATCH v2 21/86] drm/imx/lcdc: Run DRM default client setup   Thomas Zimmermann
• [PATCH v2 22/86] drm/ingenic: Run DRM default client setup   Thomas Zimmermann
• [PATCH v2 23/86] drm/kmb: Run DRM default client setup   Thomas Zimmermann
• [PATCH v2 24/86] drm/logicvc: Run DRM default client setup   Thomas Zimmermann
• [PATCH v2 25/86] drm/mcde: Run DRM default client setup   Thomas Zimmermann
• [PATCH v2 26/86] drm/mediatek: Run DRM default client setup   Thomas Zimmermann
• [PATCH v2 27/86] drm/meson: Run DRM default client setup   Thomas Zimmermann
• [PATCH v2 28/86] drm/mi0283qt: Run DRM default client setup   Thomas Zimmermann
• [PATCH v2 29/86] drm/mxsfb/lcdif: Run DRM default client setup   Thomas Zimmermann
• [PATCH v2 30/86] drm/msxfb: Run DRM default client setup   Thomas Zimmermann
• [PATCH v2 31/86] drm/panel/ili9341: Run DRM default client setup   Thomas Zimmermann
• [PATCH v2 32/86] drm/panel-mipi-dbi: Run DRM default client setup   Thomas Zimmermann
• [PATCH v2 33/86] drm/pl111: Run DRM default client setup   Thomas Zimmermann
• [PATCH v2 34/86] drm/renesas/rcar-du: Run DRM default client setup   Thomas Zimmermann
• [PATCH v2 35/86] drm/renesas/rz-du: Run DRM default client setup   Thomas Zimmermann
• [PATCH v2 36/86] drm/renesas/shmobile: Run DRM default client setup   Thomas Zimmermann
• [PATCH v2 37/86] drm/repaper: Run DRM default client setup   Thomas Zimmermann
• [PATCH v2 38/86] drm/rockchip: Run DRM default client setup   Thomas Zimmermann
• [PATCH v2 39/86] drm/sti: Run DRM default client setup   Thomas Zimmermann
• [PATCH v2 40/86] drm/stm: Run DRM default client setup   Thomas Zimmermann
• [PATCH v2 41/86] drm/sun4i: Run DRM default client setup   Thomas Zimmermann
• [PATCH v2 42/86] drm/tidss: Run DRM default client setup   Thomas Zimmermann
• [PATCH v2 43/86] drm/tilcdc: Run DRM default client setup   Thomas Zimmermann
• [PATCH v2 44/86] drm/st7586: Run DRM default client setup   Thomas Zimmermann
• [PATCH v2 45/86] drm/st7735r: Run DRM default client setup   Thomas Zimmermann
• [PATCH v2 46/86] drm/tve200: Run DRM default client setup   Thomas Zimmermann
• [PATCH v2 47/86] drm/vc4: Run DRM default client setup   Thomas Zimmermann
• [PATCH v2 48/86] drm/xlnx: Run DRM default client setup   Thomas Zimmermann
• [PATCH v2 49/86] drm/fbdev-dma: Remove obsolete setup function   Thomas Zimmermann
• [PATCH v2 50/86] drm/fbdev-shmem: Support struct drm_driver.fbdev_probe   Thomas Zimmermann
• [PATCH v2 51/86] drm/ast: Run DRM default client setup   Thomas Zimmermann
• [PATCH v2 52/86] drm/cirrus: Run DRM default client setup   Thomas Zimmermann
• [PATCH v2 53/86] drm/gm12u320: Run DRM default client setup   Thomas Zimmermann
• [PATCH v2 54/86] drm/gud: Run DRM default client setup   Thomas Zimmermann
• [PATCH v2 55/86] drm/hyperv_drm: Run DRM default client setup   Thomas Zimmermann
• [PATCH v2 56/86] drm/mgag200: Run DRM default client setup   Thomas Zimmermann
• [PATCH v2 57/86] drm/ofdrm: Use DRM default client setup   Thomas Zimmermann
• [PATCH v2 58/86] drm/simpledrm: Run DRM default client setup   Thomas Zimmermann
• [PATCH v2 59/86] drm/solomon: Run DRM default client setup   Thomas Zimmermann
• [PATCH v2 60/86] drm/udl: Run DRM default client setup   Thomas Zimmermann
• [PATCH v2 61/86] drm/virtgpu: Run DRM default client setup   Thomas Zimmermann
• [PATCH v2 62/86] drm/vkms: Run DRM default client setup   Thomas Zimmermann
• [PATCH v2 63/86] drm/fbdev-shmem: Remove obsolete setup function   Thomas Zimmermann
• [PATCH v2 64/86] drm/fbdev-ttm: Support struct drm_driver.fbdev_probe   Thomas Zimmermann
• [PATCH v2 65/86] drm/amdgpu: Run DRM default client setup   Thomas Zimmermann
• [PATCH v2 66/86] drm/bochs: Run DRM default client setup   Thomas Zimmermann
• [PATCH v2 67/86] drm/hisilicon/hibmc: Run DRM default client setup   Thomas Zimmermann
• [PATCH v2 68/86] drm/loongson: Run DRM default client setup   Thomas Zimmermann
• [PATCH v2 69/86] drm/nouveau: Run DRM default client setup   Thomas Zimmermann
• [PATCH v2 70/86] drm/qxl: Run DRM default client setup   Thomas Zimmermann
• [PATCH v2 71/86] drm/vboxvideo: Run DRM default client setup   Thomas Zimmermann
• [PATCH v2 72/86] drm/vmwgfx: Run DRM default client setup   Thomas Zimmermann
• [PATCH v2 73/86] drm/fbdev-ttm: Remove obsolete setup function   Thomas Zimmermann
• [PATCH v2 74/86] drm/armada: Run DRM default client setup   Thomas Zimmermann
• [PATCH v2 75/86] drm/exynos-drm: Run DRM default client setup   Thomas Zimmermann
• [PATCH v2 76/86] drm/gma500: Run DRM default client setup   Thomas Zimmermann
• [PATCH v2 77/86] drm/msm: Run DRM default client setup   Thomas Zimmermann
• [PATCH v2 78/86] drm/radeon: Run DRM default client setup   Thomas Zimmermann
• [PATCH v2 79/86] drm/tegra: Run DRM default client setup   Thomas Zimmermann
• [PATCH v2 80/86] drm/i915: Remove struct drm_fb_helper from struct intel_fbdev   Thomas Zimmermann
• [PATCH v2 81/86] drm/i915: Move custom restore code into separate callback   Thomas Zimmermann
• [PATCH v2 82/86] drm/i915: Move custom hotplug code into separate callback   Thomas Zimmermann
• [PATCH v2 83/86] drm/{i915,xe}: Run DRM default client setup   Thomas Zimmermann
• [PATCH v2 84/86] drm/omapdrm: Remove struct drm_fb_helper from struct omap_fbdev.   Thomas Zimmermann
• [PATCH v2 85/86] drm/omapdrm: Run DRM default client setup   Thomas Zimmermann
• [PATCH v2 86/86] drm/fb-helper: Remove struct drm_fb_helper.fb_probe   Thomas Zimmermann
• [PULL] drm-misc-fixes   Thomas Zimmermann
• [PULL] drm-misc-next   Thomas Zimmermann
• [PATCH V3] video/aperture: optionally match the device in sysfb_disable()   Thomas Zimmermann
• [PATCH V3] video/aperture: optionally match the device in sysfb_disable()   Thomas Zimmermann
• [PATCH v2 11/86] drm/atmel-hdlcd: Run DRM default client setup   Thomas Zimmermann
• [PATCH] drm: Fix kerneldoc for "Returns" section   Thomas Zimmermann
• [PATCH] drm: Fix kerneldoc for "Returns" section   Thomas Zimmermann
• [PATCH] drm: Fix kerneldoc for "Returns" section   Thomas Zimmermann
• [PULL] drm-misc-next   Thomas Zimmermann
• [PATCH v3 00/81] drm: Provide client setup helper and convert drivers   Thomas Zimmermann
• [PATCH v3 01/81] drm/fbdev-helper: Move color-mode lookup into 4CC format helper   Thomas Zimmermann
• [PATCH v3 02/81] drm/fbdev-helper: Set and clear VGA switcheroo client from fb_info   Thomas Zimmermann
• [PATCH v3 03/81] drm/fbdev: Add memory-agnostic fbdev client   Thomas Zimmermann
• [PATCH v3 04/81] drm: Add client-agnostic setup helper   Thomas Zimmermann
• [PATCH v3 05/81] drm/fbdev-dma: Support struct drm_driver.fbdev_probe   Thomas Zimmermann
• [PATCH v3 06/81] drm/arcgpu: Run DRM default client setup   Thomas Zimmermann
• [PATCH v3 07/81] drm/arm/komeda: Run DRM default client setup   Thomas Zimmermann
• [PATCH v3 08/81] drm/arm/hdlcd: Run DRM default client setup   Thomas Zimmermann
• [PATCH v3 09/81] drm/arm/malidp: Run DRM default client setup   Thomas Zimmermann
• [PATCH v3 10/81] drm/aspeed: Run DRM default client setup   Thomas Zimmermann
• [PATCH v3 11/81] drm/atmel-hdlcd: Run DRM default client setup   Thomas Zimmermann
• [PATCH v3 12/81] drm/fsl-dcu: Run DRM default client setup   Thomas Zimmermann
• [PATCH v3 13/81] drm/hisilicon/kirin: Run DRM default client setup   Thomas Zimmermann
• [PATCH v3 14/81] drm/hx8357d: Run DRM default client setup   Thomas Zimmermann
• [PATCH v3 15/81] drm/ili9163: Run DRM default client setup   Thomas Zimmermann
• [PATCH v3 16/81] drm/ili9225: Run DRM default client setup   Thomas Zimmermann
• [PATCH v3 17/81] drm/ili9341: Run DRM default client setup   Thomas Zimmermann
• [PATCH v3 18/81] drm/ili9486: Run DRM default client setup   Thomas Zimmermann
• [PATCH v3 19/81] drm/imx/dcss: Run DRM default client setup   Thomas Zimmermann
• [PATCH v3 20/81] drm/imx/ipuv3: Run DRM default client setup   Thomas Zimmermann
• [PATCH v3 21/81] drm/imx/lcdc: Run DRM default client setup   Thomas Zimmermann
• [PATCH v3 22/81] drm/ingenic: Run DRM default client setup   Thomas Zimmermann
• [PATCH v3 23/81] drm/kmb: Run DRM default client setup   Thomas Zimmermann
• [PATCH v3 24/81] drm/logicvc: Run DRM default client setup   Thomas Zimmermann
• [PATCH v3 25/81] drm/mcde: Run DRM default client setup   Thomas Zimmermann
• [PATCH v3 26/81] drm/mediatek: Run DRM default client setup   Thomas Zimmermann
• [PATCH v3 27/81] drm/meson: Run DRM default client setup   Thomas Zimmermann
• [PATCH v3 28/81] drm/mi0283qt: Run DRM default client setup   Thomas Zimmermann
• [PATCH v3 29/81] drm/mxsfb/lcdif: Run DRM default client setup   Thomas Zimmermann
• [PATCH v3 30/81] drm/mxsfb: Run DRM default client setup   Thomas Zimmermann
• [PATCH v3 31/81] drm/panel/ili9341: Run DRM default client setup   Thomas Zimmermann
• [PATCH v3 32/81] drm/panel-mipi-dbi: Run DRM default client setup   Thomas Zimmermann
• [PATCH v3 33/81] drm/pl111: Run DRM default client setup   Thomas Zimmermann
• [PATCH v3 34/81] drm/renesas/rcar-du: Run DRM default client setup   Thomas Zimmermann
• [PATCH v3 35/81] drm/renesas/rz-du: Run DRM default client setup   Thomas Zimmermann
• [PATCH v3 36/81] drm/renesas/shmobile: Run DRM default client setup   Thomas Zimmermann
• [PATCH v3 37/81] drm/repaper: Run DRM default client setup   Thomas Zimmermann
• [PATCH v3 38/81] drm/rockchip: Run DRM default client setup   Thomas Zimmermann
• [PATCH v3 39/81] drm/sti: Run DRM default client setup   Thomas Zimmermann
• [PATCH v3 40/81] drm/stm: Run DRM default client setup   Thomas Zimmermann
• [PATCH v3 41/81] drm/sun4i: Run DRM default client setup   Thomas Zimmermann
• [PATCH v3 42/81] drm/tidss: Run DRM default client setup   Thomas Zimmermann
• [PATCH v3 43/81] drm/tilcdc: Run DRM default client setup   Thomas Zimmermann
• [PATCH v3 44/81] drm/st7586: Run DRM default client setup   Thomas Zimmermann
• [PATCH v3 45/81] drm/st7735r: Run DRM default client setup   Thomas Zimmermann
• [PATCH v3 46/81] drm/tve200: Run DRM default client setup   Thomas Zimmermann
• [PATCH v3 47/81] drm/vc4: Run DRM default client setup   Thomas Zimmermann
• [PATCH v3 48/81] drm/xlnx: Run DRM default client setup   Thomas Zimmermann
• [PATCH v3 49/81] drm/fbdev-dma: Remove obsolete setup function   Thomas Zimmermann
• [PATCH v3 50/81] drm/fbdev-shmem: Support struct drm_driver.fbdev_probe   Thomas Zimmermann
• [PATCH v3 51/81] drm/ast: Run DRM default client setup   Thomas Zimmermann
• [PATCH v3 52/81] drm/cirrus: Run DRM default client setup   Thomas Zimmermann
• [PATCH v3 53/81] drm/gm12u320: Run DRM default client setup   Thomas Zimmermann
• [PATCH v3 54/81] drm/gud: Run DRM default client setup   Thomas Zimmermann
• [PATCH v3 55/81] drm/hyperv_drm: Run DRM default client setup   Thomas Zimmermann
• [PATCH v3 56/81] drm/mgag200: Run DRM default client setup   Thomas Zimmermann
• [PATCH v3 57/81] drm/ofdrm: Use DRM default client setup   Thomas Zimmermann
• [PATCH v3 58/81] drm/simpledrm: Run DRM default client setup   Thomas Zimmermann
• [PATCH v3 59/81] drm/solomon: Run DRM default client setup   Thomas Zimmermann
• [PATCH v3 60/81] drm/udl: Run DRM default client setup   Thomas Zimmermann
• [PATCH v3 61/81] drm/virtgpu: Run DRM default client setup   Thomas Zimmermann
• [PATCH v3 62/81] drm/vkms: Run DRM default client setup   Thomas Zimmermann
• [PATCH v3 63/81] drm/fbdev-shmem: Remove obsolete setup function   Thomas Zimmermann
• [PATCH v3 64/81] drm/fbdev-ttm: Support struct drm_driver.fbdev_probe   Thomas Zimmermann
• [PATCH v3 65/81] drm/amdgpu: Run DRM default client setup   Thomas Zimmermann
• [PATCH v3 66/81] drm/bochs: Run DRM default client setup   Thomas Zimmermann
• [PATCH v3 67/81] drm/hisilicon/hibmc: Run DRM default client setup   Thomas Zimmermann
• [PATCH v3 68/81] drm/loongson: Run DRM default client setup   Thomas Zimmermann
• [PATCH v3 69/81] drm/nouveau: Run DRM default client setup   Thomas Zimmermann
• [PATCH v3 70/81] drm/qxl: Run DRM default client setup   Thomas Zimmermann
• [PATCH v3 71/81] drm/vboxvideo: Run DRM default client setup   Thomas Zimmermann
• [PATCH v3 72/81] drm/vmwgfx: Run DRM default client setup   Thomas Zimmermann
• [PATCH v3 73/81] drm/fbdev-ttm: Remove obsolete setup function   Thomas Zimmermann
• [PATCH v3 74/81] drm/armada: Run DRM default client setup   Thomas Zimmermann
• [PATCH v3 75/81] drm/exynos-drm: Run DRM default client setup   Thomas Zimmermann
• [PATCH v3 76/81] drm/gma500: Run DRM default client setup   Thomas Zimmermann
• [PATCH v3 77/81] drm/msm: Run DRM default client setup   Thomas Zimmermann
• [PATCH v3 78/81] drm/radeon: Run DRM default client setup   Thomas Zimmermann
• [PATCH v3 79/81] drm/tegra: Run DRM default client setup   Thomas Zimmermann
• [PATCH v3 80/81] drm/omapdrm: Remove struct drm_fb_helper from struct omap_fbdev.   Thomas Zimmermann
• [PATCH v3 81/81] drm/omapdrm: Run DRM default client setup   Thomas Zimmermann
• [PATCH v3 40/81] drm/stm: Run DRM default client setup   Thomas Zimmermann
• [PATCH v3 04/81] drm: Add client-agnostic setup helper   Thomas Zimmermann
• [PATCH 9/9] drm/tilcdc: Use backlight power constants   jyri.sarha at iki.fi
• [PATCH 3/4] drm/i915/opregion: convert to struct intel_display   kernel test robot
• [PATCH 7/7] drm/i915/pmu: Do not set event_init to NULL   kernel test robot
• [linux-next:master] [fs] cdc4ad36a8: kernel_BUG_at_include/linux/page-flags.h   kernel test robot
• [PATCH] drm/xe/pm: Change HPD to polling on runtime suspend   kernel test robot
• [PATCH] video/aperture: match the pci device when calling sysfb_disable()   kernel test robot
• [PATCH] video/aperture: match the pci device when calling sysfb_disable()   kernel test robot
• [PATCH v5] drm/i915/hwmon: expose fan speed   kernel test robot
• [PATCH v5] drm/i915/hwmon: expose fan speed   kernel test robot
• [PATCH 1/5] drm/i915/display: Add support for SNPS PHY HDMI PLL algorithm for DG2   kernel test robot
• [PATCH 83/86] drm/{i915,xe}: Run DRM default client setup   kernel test robot
• [PATCH 83/86] drm/{i915,xe}: Run DRM default client setup   kernel test robot
• [PATCH V2] video/aperture: match the pci device when calling sysfb_disable()   kernel test robot
• [PATCH v6] drm/i915/hwmon: expose fan speed   kernel test robot
• [PATCH 2/2] drm: ensure drm headers are self-contained and pass kernel-doc   kernel test robot
• [PATCH v3 14/15] drm/i915/gt: Implement creation and removal routines for CCS engines   kernel test robot
• [PATCH 2/2] drm: ensure drm headers are self-contained and pass kernel-doc   kernel test robot
• [PATCH 5/7] drm/i915/display: include media/cec-notifier.h and linux/debugfs.h where needed   kernel test robot
• [PATCH 5/7] drm/i915/display: include media/cec-notifier.h and linux/debugfs.h where needed   kernel test robot
• 回复：Re: [PATCH] drm: Fix kerneldoc for "Returns" section   renjun wang
• 回复：Re: [PATCH] drm: Fix kerneldoc for "Returns" section   renjun wang
• [PATCH v3] drm/i915/gt: Use kmemdup_array instead of kmemdup for multiple allocation   于佼良

Last message date: Sat Aug 31 16:02:49 UTC 2024
Archived on: Tue Sep 3 12:52:55 UTC 2024

• Messages sorted by: [ thread ] [ subject ] [ date ]
• More info on this list...